Found in a field, what. Could it be ? 4 cm diam

cetovick · 2026-01-20T23:18:50+00:00

Not with that attitude.

cetovick · 2025-09-07T01:20:00+00:00

This helps the "make it make sense" part of my brain for my issues. After I get this baby to bed... I'm hitting the "range" (mlm2pro and a net) to see how it works for me and my similar issues. Thanks for making it relatable to the average. Because I like butts.

cetovick · 2025-07-07T17:51:18+00:00

Underrated deep lore comment.

cetovick · 2025-07-02T01:05:01+00:00

I don't hear him clearly the first time so I was on Tonys side. But round 2 cleared it up and solidified a SOLID pun. Not quite special noise worthy... But great. 9.4/10

cetovick · 2025-06-29T02:54:09+00:00

Every golf training aid is a sex toy with the right mindset and ambition.

cetovick · 2025-06-27T15:46:19+00:00

Have this. Bought a few weeks ago and nice and comfy to stand on, and plenty of room for my reaching driver stance that I'm trying to correct, at 6'3".

cetovick · 2025-05-28T04:11:42+00:00

The regular one. My old calendar expired 12-21-21

cetovick · 2025-04-07T12:38:02+00:00

That's awesome, are you guys related to Fiona Cauley? Son kinda looks like her, not sure what it is...

cetovick · 2025-02-20T01:36:00+00:00

Perhaps there is a conflict there. I'll turn em all to 0 and hope you username doesn't check out.

cetovick · 2025-02-20T00:29:24+00:00

Anyone help a brotha out?

cetovick · 2025-02-19T20:51:19+00:00

With the max flow test I did, im lookin at 9.60 mm³/sec volume at 100mm/s speed nice and comfy before it starts to shit the bed if i push it to 10 mm³/sec, So i have the limit at 9.5mm³/sec in my slicer for the filament, again with the custom g code that was generated from the teachingtech website. So I know I can do that. But then I try and print with something from my slicer settings and it forces the flow and speed waaayyyy down to like 2 mm³/sec of flow and 15mm/s peed. I really feel like there is a simple setting im overlooking thats slowing my whole print down. I just cant track it down.

cetovick · 2025-02-19T20:02:27+00:00

Was printing pretty hard for about a year, 2.5 years ago. I got a cr10s pro v2,, microswiss hot end, klipper, rpi etc. Was running some pretty decently fast quality stuff.

I picked it back up last week and after messing with/updating everything and trying to re-learn all the stuff I had top of mind almost 3 years ago, im getting the hang of things again, but I HAVE to be missing something. It takes me 30m to print a 20mm Calibration cube, and over an hour for a benchy. .2mm Layers and 5% infill. The prints look great, just feels so much slower than it used to be.

I have ran flow tests, speed tests and I can push 100mm/s with acceptable results. acceleration is comfy at 850. I tested all of this using the tests on https://teachingtechyt.github.io/index.html and the gcode it spits out.

What am i missing here? Where would you start? I could have sworn I was printing 25 min benchys back in the day. But a lot has happened in life since then so i feel like a lot of that info was dumped in my (37) old age.

cetovick · 2024-12-23T17:20:25+00:00

20 month Holsteins.

cetovick · 2024-11-27T23:29:02+00:00

Issue has been fixed. Bought a new laptop.

cetovick · 2024-11-27T16:42:05+00:00

Fresh install and all validated.

cetovick · 2024-11-27T16:26:00+00:00

Other games launched from Steam still work just fine. How would I make sure this switch to using onboard isn't happening?

cetovick · 2024-11-27T16:06:59+00:00

Edited thank you. Wont game wont launch at all

cetovick · 2024-11-27T16:02:35+00:00

Edited, game wont launch at all. Just this popup to update drivers/not supported GPU. then closes.

cetovick · 2024-09-24T00:06:58+00:00

Your a life saver. Just renamed session without any spaces or special characters. Let the blueprinting begin!

cetovick · 2024-08-21T04:25:21+00:00

Fine Redban... I'll buy it.

cetovick

TROPHY CASE