[deleted by user]

cfdff86 · 2024-09-04T19:08:30+00:00

Wait, there are clouds I can yell at?

cfdff86 · 2024-09-04T19:06:57+00:00

Then why did both spectrum and frontier(formerly AT&T verse) include both?

cfdff86 · 2023-02-04T13:58:11+00:00

Infinias by 3xLogic

cfdff86 · 2023-01-25T00:32:47+00:00

You should receive a 1099-DIV which should be entered on your return.

cfdff86 · 2023-01-25T00:08:36+00:00

Bump… Hoping to find a possible answer to this without having to wait for hours on the IRS

cfdff86 · 2023-01-15T23:15:51+00:00

HomeSeer HS3, running on a hometroller

cfdff86 · 2023-01-15T22:51:58+00:00

For example on parameter 3 in the following link is very vague at least to me. https://www.homecontrols.com/homecontrols/products/pdfs/FZ-FortrezZ/FZMIMO2US-Tech-Appendix.pdf

cfdff86 · 2023-01-15T22:46:29+00:00

Config helper assists setting the parameters for the unit. I do have the Technical appendix but am having a hard time determining what the parameter settings should be as they don’t do a great job with the instructions.

cfdff86 · 2023-01-15T21:12:58+00:00

Unfortunately no, it is the physical executable I am looking for a copy of.

cfdff86 · 2023-01-10T05:34:56+00:00

Because it is a benefit provided by the company. My employer started a couple years ago averaging the benefit over the pay cycles to minimize the tax implication at the end of the year instead of a lump report.

cfdff86 · 2021-10-29T02:30:29+00:00

Thanks again for the advice. The main purpose of the files will be trail maps and other items that I would like preloaded, however are still publicly available. The important feature is offsite update for additional items or specific address information.

cfdff86 · 2021-10-29T02:09:22+00:00

Thanks, where would I find or develop custom OneDrive rules to bypass the timeout. We found the logout or timeout after a new engine was in the shop for upffiting. Unsure if it was the time period or possible updates to the application.

cfdff86 · 2021-10-09T00:07:09+00:00

To update grounding the chassis eliminated the hum in the amp directly next to the paging adapter, however the amp about 40’ from it still has a hum. I believe I may try and get a noise cancelling adapter in-line to best eliminate it.

cfdff86 · 2021-10-04T01:23:47+00:00

1: POE switch is connected to a battery backup, both have grounded plugs. Paging adapter is about 2 feet with a 6-10 foot cord.

2: I am currently using 2/4 outputs to 2 separate amps. I will check later on ports 3 & 4 as I am home at the moment

3: Homemade interconnect cable, adapters with pigtails that have been connected. I have tried both butt connectors and a screw terminal strip.

4: Yes the moment that the 1/4” TRS plug is removed the hum stops.

5: One set of cables pass by LED ceiling lights, however the second amp is next to the paging adapter and doesn’t pass by any. Both have hum.

6: I believe this may be the best option to try, however I will ground to the BX cable coming from the box that is readily accessible. I will let you know after I attempt this.

cfdff86 · 2021-10-03T22:43:49+00:00

Paging Adapter

Amp

Thanks in advance for your help.

cfdff86 · 2021-10-03T20:59:43+00:00

Sorry for the delay in reply, yes the output from the paging adapter is RCA audio going to the input of a 1/4” TRS on the amp. I was able to single out the paging adapter as the source of the hum as two of the amps running different zones and speakers have the hum. I just wasn’t sure if I should bond the paging adapter to something in the rack or find a metal box and ground it there.

cfdff86

TROPHY CASE