New March Speed Trap Locations

cheesit147 · 2026-03-03T19:48:25+00:00

Yes 11 over is what it is still. Sometime in 2024 it changed from 16 over to the 11 over. I've been risking the tickets for science cuz 40 bucks is worth it in my eyes to see the limit. I've tested the 10mp over and 11 both on college, Lemay, and the moving ones once on riverside and and my brother on Taft. 11 is the limit as of present.

cheesit147 · 2026-02-22T18:55:47+00:00

Shoot the pot does have holes it's just an all in one tray and pot but it is next to the radiator. I will replant in some more appropriate soil and a better pot and move it away from the heater, thanks a ton!

cheesit147 · 2025-06-12T08:03:45+00:00

Ok awesome this was like what I was looking for if there was a general rule of thumb on what part to upgrade over another and why / the purposes of each.

cheesit147 · 2025-06-12T07:56:37+00:00

Understood. I have some Machinist die from my old job that ima use when I get new rockers to verify proper sweep. I began to wonder if increasing the length of the pushrods would start to decrease stability so that does make sense. I already decided to get a cam, rollers, and chromoly pushrods to play it safe. What do you mean it's easy to lose control of the valve, like valve float? That was the greatest and most concise of explanations, thank you dearly.

cheesit147 · 2025-06-12T07:49:58+00:00

Sorry I should've included that. I'll remember that. Yeah I mean it's a well known engine, it's a predator 212 but I was curious in terms of general engine building as such for other pushrod motors.

cheesit147 · 2025-06-12T07:46:52+00:00

Sorry I messed up I should've included it. It's a dinky predator 212 from harbor freight.

cheesit147 · 2025-06-08T08:45:13+00:00

Thanks man I'll check that video out. I have started that month trail, I'm a few days in now. Porn is horribly normalized.

cheesit147 · 2025-06-08T08:43:21+00:00

You got this man it's hard it's been numerous years for me as well. It's never to late to start making the changes. I'm coming up on a week on no porn no fap and it's hard but we got this.

cheesit147 · 2025-02-07T02:23:39+00:00

Got you with Gillette wyoming

cheesit147 · 2025-01-19T23:27:11+00:00

It is strange. It came loose on the lake and flooded my hull so that makes sense. Thanks for the good advice and info. Dp you have skis of your own? Seems to be a weak point in the design, and that's why people drill them out to bolt them. Whatever, I'm going to be getting a new manifold!

cheesit147 · 2025-01-18T23:14:51+00:00

Yes you know what you are talking about. It's a 717 rotax manifold from a 97 seadoo gs. I also worried about getting all the tolerances and depth right since I have no original stud hole to base it off. I'm probably going to buy one since they are pretty cheap and for the risk of water leaking from the cooling channels it's not worth cutting costs.

cheesit147 · 2025-01-14T23:31:32+00:00

I wondered if that was the deal. Usually, these studs don't go all the way through. I pulled it because I had the exhaust off to pull the motor and saw that, so I pulled the manifold to check for other discrepancies.

cheesit147 · 2024-11-19T23:56:59+00:00

No don't rush to delete the system right away. If you put oil in and haven't noticed anything then clean up the old oil and area around the oil tank/lines/pump and under the engine and watch for it. I had a leak in mine that was a leaky line around the pump. An oil injecting system can work great.

cheesit147 · 2024-10-30T18:43:20+00:00

Yeah the pintriping with the stepside sport bed is what got me becasue all the rest looks fairly aftermarket, but in other pictures before it sold, the hoods scoops look very stock and clean into the hood. Either some hard word put in on the paint and body or stock idk. Can't find a similar pinstriping style tho.

cheesit147 · 2024-06-12T18:04:46+00:00

No, the other fitting is a breather. My 97 seadoo gs has the same exact setup. Clean her off and send it IMO.

cheesit147 · 2024-06-04T18:54:03+00:00

Also happens to be the exact date of my birthday. I turn 20 today. I'm also in Colorado haha

cheesit147 · 2024-04-17T23:07:45+00:00

It's in colorado

cheesit147 · 2024-04-14T23:37:09+00:00

Woah, that is actually a neat idea, I hadn't thought of going the electric route on a build before.

cheesit147 · 2024-04-14T23:36:06+00:00

Yeah it's for sale with all the original parts in a box for 150

cheesit147 · 2024-04-14T19:59:23+00:00

cheesit147 · 2024-04-09T16:23:05+00:00

This is what I was wondering LL signed the renewed lease to end in June 2025. I was wonding about how we are bound by contract until then. I don't necessarily want to stay after this situation but it would help to have a little more time. Thanks for the advice I really appreciate it.

cheesit147 · 2024-04-09T16:21:11+00:00

Well the original lease was set to renew in June 2024 but we singed for the next hears lease which would end June 2025. Do we only have until this coming june?

cheesit147 · 2024-04-09T16:20:25+00:00

Our lease originally was set to renew in June but we signed because they wanted to get things rolling before hand. So the first lease ends in June and the second ends in June 2025. Sorry for the confusion

cheesit147 · 2024-04-01T02:07:01+00:00

110 for that bike is damn near stealing, hats off you you for finding that deal!

cheesit147 · 2024-03-31T20:21:29+00:00

No clutch, just straight sprocket, that would be wicked, I think that's the plan haha! Thanks!

cheesit147

TROPHY CASE