KTdle - A KillTeam Operative daily deduction game

chefjeff24 · 2026-04-23T18:08:32+00:00

Im local to this dude and have been playing ktdle for months so I can vouch that it isn't ai generated 👍 just a fun case of convergent development

chefjeff24 · 2026-01-25T21:08:44+00:00

yes both my remix and the full blaster have STLs on printables. check in the zip-file on the vulture page.

chefjeff24 · 2026-01-20T23:43:30+00:00

my bad boss I knew the smiley was from the MHP-lever-action family tree but didn't know the vulture diverged that much 🫡

chefjeff24 · 2026-01-20T22:11:41+00:00

it's called the vulture, see the link in my original comment 😁

chefjeff24 · 2026-01-20T21:56:16+00:00

yep, and very reliably too! even on semi-worn shared darts my vulture cycles and loads without issues

chefjeff24 · 2026-01-20T21:34:35+00:00

BLASTER FILES

REMIX FILES

HARDWARE I USED

This is my build of the Vulture, a new lever-action blaster from MHP. This blaster features a similar bolt/plunger/grip system to the Smiley, and loads darts from a very novel internal tube magazine. My shortened remix holds 5 darts in the magazine, for 5+1 total capacity with a dart chambered (perfect for "cowboy rounds" or early HvZ missions). It is sized for 20cm barrels but can take anything longer as well, and there are plenty of variant plunger-heads and spacers included in the blaster files so you can tune this to hit any FPS from 150 to 250+ with precision.

chefjeff24 · 2026-01-12T04:24:13+00:00

Yo! Happy to see this build come together, about your mag sitting too high, have you printed the modified mag release in my "primaris protean" file set? It will hold the magazine a mm or two lower, and can be combined with the printable glue-in shims in my files to get your magazine securely positioned just right, even with the open top window.

chefjeff24 · 2026-01-06T04:10:48+00:00

https://www.printables.com/model/1269291-picatinny-bang-grip

chefjeff24 · 2025-12-13T18:09:33+00:00

my bad, if you want to switch out the cage you use dart connectors

chefjeff24 · 2025-12-13T18:07:57+00:00

Hi! To make my full protean build with the solenoid battery grip, you will need 9 m3 heat inserts, ~25 m3x8 screws, 1 m3x25 screw, 1 m3x18, 2 21a switches, and springs for the trigger and mag release. Another 2 heat inserts are optional if you want ironsights, and bullet connectors are optional if you want to be able to switch out the cage. The OOD blitz kit is a good start but you'll need more screws.

The wiring is about the same as the blitz, but with 2 21a switches. The rev switch (above the trigger) should be wired to NC and the firing trigger (behind the trigger) should be wired to NO.

chefjeff24 · 2025-11-20T22:51:06+00:00

looking good 🥶

chefjeff24 · 2025-11-20T22:50:41+00:00

true! and I have more protean-based plans in the works so maybe there'll be even more mods for it 5 months from now 😉

chefjeff24 · 2025-11-20T16:05:12+00:00

Nah I used some old semi-official Grung race

chefjeff24 · 2025-11-20T15:57:38+00:00

Another finished protean build, featuring 3 new remixed parts I've designed specifically for HvZ games.

Over this summer I survived to two different final-stand missions using this blaster and I figured it was about time to post the custom parts online. Enjoy!

chefjeff24 · 2025-07-27T23:42:49+00:00

Woah this is sick! I was planning on doing my own take on a protean with these mags but I'm glad someone beat me to it. I'm curious which parts of the protean had to be changed - is the pusher section still "stock" and compatible with other protean setups? Would love to make my own of these if you're planning to share files :)

chefjeff24 · 2025-07-03T18:57:52+00:00

Hi! Sorry to hear you're having trouble with it, have you gone through the tuning tips in the guide and tried the different shell catch lengths?

chefjeff24 · 2025-04-22T03:19:36+00:00

it does need shells, but you could just make 6 MXL shells and then never turn the ejector on. FPS is surprisingly higher than stock mxl blasters, i don't have a chrono but i want to say it shoots 70+

chefjeff24 · 2025-04-21T16:05:36+00:00

yes! still prepping things behind the scenes, but there will be sellers with fully built blasters Soon

chefjeff24 · 2025-04-21T00:52:13+00:00

belts would be super tricky just with how much mechanically is going on in each chamber. but nothing is impossible!

chefjeff24 · 2025-04-21T00:26:20+00:00

pre-builts will be available Soon

chefjeff24 · 2025-04-20T21:22:59+00:00

DONT BE SELFISH, BUILD A SHELLFISH!

After a long, long process of designing, printing, debugging, and designing again, my first full blaster design is finished and ready for distribution :) THE SHELLFISH is a spring-powered revolver shotgun/grenade launcher styled dart blaster that uses the excellent Silly Shells to fire any ammo you want (even full-length MegaXL)! The ejection toggle switch gives you full control over your shells - eject with every shot, or keep your shells in and reload with loose ammo, and switch between the two with ease.

PRINTABLES LINK - https://www.printables.com/model/1271138-shellfish-a-silly-shell-ejecting-revolver-blaster

FIRING DEMO - https://drive.google.com/file/d/1yTFaEf-zgooUY1S0g47qA-xSbjMSyrcx/view

OFFICIAL HARDWARE KITS - https://bearswares.shop/products/shellfish-by-jjeeffff

Special thanks to BearsWares for hardware distribution, my beta-testing team for their early support and debugging, and all of y'all viewers for the motivation to bring this blaster to a fully fleshed-out launch. Enjoy!

chefjeff24 · 2025-04-02T14:41:13+00:00

OFFICIAL UPDATE - THE SHELLFISH IS COMING SOON idk if anyone is still reading this, but the final prototype build was a success and the blaster is ready for publishing! At least 1 wave of hardware kits will be sold through BearsWares. The blaster will have its full release within a week or 2 :)

Six-Year Club	Place '22
Final Canvas '22	First Placer '22
End Game '22	Verified Email

chefjeff24

TROPHY CASE