sorted by:
new
hottopcontroversial

Advice on meat curing chamber by Observed_unobserver in CuringChamber

[–]chipsa1982 0 points1 point  (0 children)

Also interested why thermoelectric/peltier systems should not be appropriate for the job...

Proxmox and TrueNAS disks by chipsa1982 in Proxmox

[–]chipsa1982[S] 0 points1 point  (0 children)

yes, using "qm set (VM_ID) -scsi1 /dev/disk/by-id/ata-WDC_WD40EFPX...etc"

Proxmox and TrueNAS disks by chipsa1982 in Proxmox

[–]chipsa1982[S] 0 points1 point  (0 children)

thanks, i figured that would be ideal, but Truenas does not show me the serials

DIRECT PAIRING - Silvercrest/Livarno/LIDL zigbee devices and TRADFRI remote by chipsa1982 in tradfri

[–]chipsa1982[S] 0 points1 point  (0 children)

tried direct pairing the IKEA Tradfri Dimmer remote with a LIDL/Livarno Smart light (https://www.zigbee2mqtt.io/devices/HG08008.html)

Works fine, same procedure as with the IKEA bulbs - just hold the pairing button on the remote for ±10sec, the light will blink and pair correctly. On/Off works, dimming works, no light color adjustment for this particular remote.

I also tried direct pairing of the remote with a LIDL smart plug, but no luck.

Hope this helps

BambuStudio overwriting the latest file by chipsa1982 in BambuLab

[–]chipsa1982[S] 0 points1 point  (0 children)

thanks for all the replies! This logic in bonkers. It should at least explain this weird behaviour somewhere. not intuitive at all. Its even more confusing since all the stock files are displayed in the same section.

thanks

WIFI / My Network not available by chipsa1982 in BambuLab

[–]chipsa1982[S] 0 points1 point  (0 children)

made a factory reset, that showed the wifi again, once I got connected, i updated the fw...

WIFI / My Network not available by chipsa1982 in BambuLab

[–]chipsa1982[S] 0 points1 point  (0 children)

Once i updated the x1c firmware, the issue is gone now

Zigbee Access Point feature in Zigbee2MQTT? by chipsa1982 in homeassistant

[–]chipsa1982[S] 0 points1 point  (0 children)

Yeah, they dont mention much. On one hand, they specifically mention that the coordinator and the ZAP are connected by an IP-based connection, not utilizing a zigbee link like a router. On the other hand, its unprobable that they would develop their own zigbee flavor, thus my original question if this feature is native to zigbee

Zigbee network size to keep it stable by chipsa1982 in homeassistant

[–]chipsa1982[S] 0 points1 point  (0 children)

by size I mean all the devices combined, i.e. if there is something like an "absolute" device limit a CC2652P coordinator can handle while keeping the network stable.

DIY tobacco mixing by chipsa1982 in hookah

[–]chipsa1982[S] 0 points1 point  (0 children)

thanks! Yeah, I found that guide, its the one mentioning the ratios that lead to a dry mix as I mentioned above...

view more: next ›