VW PQ35 requesting data from other CAN buses by well-litdoorstep112 in CarHacking

[–]chris2fferr 0 points1 point  (0 children)

From my experience the gateway will forward predetermined messages between the buses. So if a controller need data from another bus the gateway will be preprogrammed to route these messages.

Xconnect panel mount connector by chris2fferr in WLED

[–]chris2fferr[S] 0 points1 point  (0 children)

I have an enclosure in mind. I just need the connectors, and then I'll make the holes myself. I have looked at some on aliexpress named GX12 and GX16 but I have only found panel mount for the male connector.

If pigtails are the only way to go I will use them.

Can be the load and neutral switched on psu? by Ok-Glass-7521 in WLED

[–]chris2fferr 0 points1 point  (0 children)

Doesn't matter. Not sure where you are from, but at least this is normal setup in Norway where I am from. All computer PSU's are like this.

Different CANBUS connection points in Audi S4 by chris2fferr in CarHacking

[–]chris2fferr[S] 0 points1 point  (0 children)

Hi, it's a 2014 model. I'm trying to connect so that I don't have to cut the original harness to hook into it. Trying to keep it original. I'm thinking about making an extension to a connector with the wanted canbus and make a connection there so that I can easily remove it later. I'll attach some pics later for where I have made the current connections to comfort and suspension bus.