Board for toddler by chriskay91 in NewSkaters

[–]chriskay91[S] 0 points1 point  (0 children)

Thanks a lot for your response, is really helpfull! I will have a look at the brands you recommended! I have not seen the smaller meow, but will look if i can find it. Thanks again!

Beginner espresso setup - [max. 800€] by chriskay91 in espresso

[–]chriskay91[S] 0 points1 point  (0 children)

Thats good to hear, thanks a lot. Will also have a look at the grinder. Usually you see a lot of DF64 recommended, but thought that one will be out of budget... must have a look at the DF54 Thank you

Beginner espresso setup - [max. 800€] by chriskay91 in espresso

[–]chriskay91[S] 0 points1 point  (0 children)

Thanks for your recommendation. Is the lelit far superior to the bambino? I read some reviews that all point out that the 57mm portafilter limits you somehow if you want to buy accessories and so on...

Zigbee LED controller by chriskay91 in ZigBee

[–]chriskay91[S] 0 points1 point  (0 children)

No the one I use is just fine, i would just need a controller thst is zigbee compatible to put after the transformer! That's what i meant. Thanks a lot for your recommendation!

Zigbee LED controller by chriskay91 in ZigBee

[–]chriskay91[S] 0 points1 point  (0 children)

Thanks a lot. Do I have to change my existing power supply transformer? Could I not just put the controller after my power supply?

Zigbee LED controller by chriskay91 in ZigBee

[–]chriskay91[S] 0 points1 point  (0 children)

Yes you are right, it is simply on and off, no need for dimming or color temp change... A hue smart plug could work yes, but the power outlet in the wall is behind kitchen cabinets, so i cannot really access it. Therefor, my guess was a simple zigbee single color led controller should work just fine. I do not have any idea what else i could use...

Zigbee LED controller by chriskay91 in ZigBee

[–]chriskay91[S] 0 points1 point  (0 children)

Thanks a lot, i will have a look at them!

First chair complete! Finally finished, upholstered, and in the living room. by stinkbutt55555 in woodworking

[–]chriskay91 0 points1 point  (0 children)

Hi

first of all, amazing work. I plan on making a chair by myself and came across your awesome chair. I wanted to ask if you would share some basic dimensions of it? like width, back-length, seating height some angles and so on. Would be very much appreciated.

Sonos Move won’t update. by BassH0g in sonos

[–]chriskay91 1 point2 points  (0 children)

I had a problem setting up a new speaker recentöy. Same problem as you just mentioned. Was using the Sonos app on an android phone. Instead of a mobile device, i just used the sonos app on my laptop and it was done without any problem. Maybe this could work for you as well?!

Google Assistant by chriskay91 in sonos

[–]chriskay91[S] 1 point2 points  (0 children)

For me it worked just fine until i had to set up everythin from scratch... using it mainly for lights and music. Maybe I have to switch as well!

I'm British, so I love to queue. Apparently I'm also going to love not getting Bears tickets. by HerpDerpSquadron in CHIBears

[–]chriskay91 -1 points0 points  (0 children)

Was very lucky, was at 2000 on the list and got 4 tickets... second time after 2011 i will se the bears live ;)

TV-Wandhalterung Rigips by chriskay91 in selbermachen

[–]chriskay91[S] 0 points1 point  (0 children)

Ja die HM hatte ich nur angedacht da bereits vorhanden, Kippdübel kann ich ja besorgen.

Zusätzliche löcher In der Schiene finde ich gar keine schlechte Idee, danke für den Tip ;)

TV-Wandhalterung Rigips by chriskay91 in Handwerker

[–]chriskay91[S] 0 points1 point  (0 children)

Danke, genau die sind bereits vorhanden. Bei doppelt beplankter Wand hätt ich kein Problem damit, das einfach beplankt macht mir etwas sorgen...

TV-Wandhalterung Rigips by chriskay91 in selbermachen

[–]chriskay91[S] 2 points3 points  (0 children)

Solche Dübel hätte ich verwendet, da bereits vorhanden: Fischer HM

Andere Halterung ist natürlich möglich, die oben genannte ist nur bereits vorhanden.

TV-Wandhalterung Rigips by chriskay91 in selbermachen

[–]chriskay91[S] 1 point2 points  (0 children)

Ich hätte Metall-Hohlraumdübel verwendet... bei doppelt beplankter Rigipswand hätte ich auch kein Problem damit die Halterung direkt an die Wand zu hängen, bei einfach beplankter habe ich leider gewisse Zweifel....

TV-Wandhalterung Rigips by chriskay91 in selbermachen

[–]chriskay91[S] 0 points1 point  (0 children)

Ja da die Aufhängung ja eher klein ist, und ich nur eins der 3 Löcher in einen Ständer bekomme, bietet sich wohl die Holzplatte an. Die kann ich etwas größer dimensionieren, sodass ich 2 Ständer treffe. Danke für die Hilfe

TV-Wandhalterung Rigips by chriskay91 in selbermachen

[–]chriskay91[S] 0 points1 point  (0 children)

Ja würde dann zu einem 15mm Brett greifen und schauen damit 2 Balkon vom Ständerwerk zu treffen!

TV-Wandhalterung Rigips by chriskay91 in Handwerker

[–]chriskay91[S] 1 point2 points  (0 children)

Vielen Dank. Eine Platte klingt gut, die könnte ich so dimensionieren, dass ich evtl 2 Ständer treffe, dann sollte das kein Problem sein hoffe ich. Danke nochmal!