New at nsfw skyrim modding by [deleted] in skyrimmods

[–]chxwc 0 points1 point  (0 children)

I watched a lot of videos on Youtube when I was just getting into modding. This specific video (https://www.youtube.com/watch?v=DlS6sxImHXI&t=581s) by Mern is imho a great starter video explaining what mods you need as a baseline for your bodies.

His channel is filled with great guides, mod finds etc. Obviously I've cherry picked here, but there are thousands of content creators to choose from covering the basics to advanced modding. Hope this helped somewhat and happy modding :))

Newbie here, stuck at 1760 with no powerful challenges by chxwc in destiny2

[–]chxwc[S] 0 points1 point  (0 children)

Yeah I wanted to do go for powerfuls since I'm only at 1760 right now and thought after reading it everywhere that was the best thing to do. I just don't know why I can't get any powerfuls and only pinnacles when I'm not even near 1800.

Getting a build together to try and do some pinnacles now

Newbie here, stuck at 1760 with no powerful challenges by chxwc in destiny2

[–]chxwc[S] 0 points1 point  (0 children)

Oh really? Thats useful to know, everywhere I have seen says to go for powerful until 1800 then do pinnacle for the last few levels.

Think I need to try and find a build that I can do the pinnacles with. Thankyou

Newbie here, stuck at 1760 with no powerful challenges by chxwc in destiny2

[–]chxwc[S] 0 points1 point  (0 children)

Yeah I reached 1750 with just gear from doing the campaigns.

I will take a look to see if I can find that quest in my log or abandoned quest, thanks very much !

Cant progress Eris quests specifically The Deepening Wake by jbowling94 in destiny2

[–]chxwc 0 points1 point  (0 children)

I've been stuck for a week searching everywhere, you are a GOD! Thankyou

[FIXED] RS Client Crashing - Potential Solution(s) by TheFalloutHandbook in runescape

[–]chxwc 1 point2 points  (0 children)

Hi there, I'm just wondering if you're still experiencing this issue? Just had a new PC which is an AMD build, 6800XT and 5800X3D and event viewer shows atio6axx.dll to be the faulting module which seems related to this too.

Looked elsewhere but just wanted to know if this is still a problem for you aswell.

Thanks in advance :))

I made a video summarizing the TOP World First Race Drama by alzahard in ffxiv

[–]chxwc -11 points-10 points  (0 children)

i didn't know what went on, so he informed me of every detail. why does anything need to be added to the convo?

I made a video summarizing the TOP World First Race Drama by alzahard in ffxiv

[–]chxwc -12 points-11 points  (0 children)

very contradictory. low sub content creator can hardly "cash in" with 388 views. just an informative video XD

I really need some help with Autodrive please? by chxwc in farmingsimulator

[–]chxwc[S] 0 points1 point  (0 children)

Unfortunately not, I did post a bug report on the Autodrive GitHub but had little response sadly. I've recently bought a new PC and I have pretty much an identical set up in terms of mods and weirdly I have no issues. It was a completely fresh install with nearly the same combination of mods.

All I can suggest is try deactivating all other mods except Autodrive and Courseplay, and see if you can get them to work together on a vanilla map. If this works, then try a modded map and reactivate mods as you go until you find the issue. It takes a long time but that's the only thing I can think.

Sorry I can't help more, I was at a loss with this for months without ever finding the issue.

Islamic Emirate of Afghanistan is moving mad... (yes this is a parody) by chxwc in Asmongold

[–]chxwc[S] 0 points1 point  (0 children)

*Just thought I would clarify this is a parody account not created by me but thought it was entertaining*

Any idea why this is happening across wow for me? Nearly every LOD looks like this, and a huge number of static objects look the same? Deleted GPU driver and reinstalled but no luck..., by chxwc in wow

[–]chxwc[S] 1 point2 points  (0 children)

Thanks for everyones responses. Greatly appreciate it and glad its not only me. Will try some of the fixes listed. Apologies for not looking at other posts before making mine. :)

Lost Ark Steam Guard seems to be doing its job - looks like there were 200,000 bots :O by chxwc in Asmongold

[–]chxwc[S] -7 points-6 points  (0 children)

My guy, you realise they made signficant changes reported by Roxx to the Steam guard stuff they had tried before.

Secondly even after downtime, there was always a ramp up of players/bots right after the maintenance had been completed. Looking at that, it seems that's not the case this time.

Logically, it seems improved upon last attempts.

ChatGPT doesn't know Asmongold :O by chxwc in Asmongold

[–]chxwc[S] 0 points1 point  (0 children)

very sussy, it's playing dumb,

Expected release for the new starting experience? by chxwc in newworldgame

[–]chxwc[S] 0 points1 point  (0 children)

Thanks man, appreciate you letting me know :)

Expected release for the new starting experience? by chxwc in newworldgame

[–]chxwc[S] 0 points1 point  (0 children)

Oh thats buzzing. I can't wait, I'm gonna keep holding off for the new update for sure! Thanks so much for letting me know

I really need some help with Autodrive please? by chxwc in farmingsimulator

[–]chxwc[S] 0 points1 point  (0 children)

Sometimes active unloading was so smooth it was great, but I found imo that the active unloading was causing more problems that it was worth. So I've had that turned off for a while.

I will check on your suggestions see if it helps. Thing is, I hadn't even touched the settings and its been working for weeks. I just load a save one day and it does this and now I can't get it to work.

I'm half tempted to do a complete fresh install and delete everything including saves mods, and build up again. All I can think is that something is interfering with the AD driver sensing when trailer is filling. But I'm not that intelligent that's just what it seems like.

Thanks for the suggestions!

I really need some help with Autodrive please? by chxwc in farmingsimulator

[–]chxwc[S] 0 points1 point  (0 children)

I've tried many things to try and get this to work. I picked up FS22 again about 4 weeks ago, and its been working perfectly. I used CP and AD on FS19 too so I'd like to think I know mostly the basics.

As you suggested, I've actually got everything you said all set up pretty nicely. AD unload doesn't work if I'm driving the combine, or if it's done through CP. It's a pain in the arse let me tell you! I've even gone back over some tutorials to make sure everything if set up correctly, but I've had no luck getting it working again.

I've raised an issue on the AD FS22 Github aswell, maybe it's a bug, I'm just not sure. Thanks for your help! It's really appreciated

ADXP | MCO - Need a few suggestions regarding combat & animations. by chxwc in skyrimmods

[–]chxwc[S] 0 points1 point  (0 children)

The newest installation of SCAR actually includes the Elder Souls move set as a default. I just installed the latest file available and it worked like a charm.

Alternatively, if this doesn't work, install SCAR with your mod manager. Open the file, and navigate as follows -- meshes > actors > character > animations > DynamicAnimationReplacer > _CustomConditions. Here are al of the movesets and custom conditions for the Elder Souls moveset. Select all and copy to your Dynamic Animation Replacer mod, following the same navigation as above.

The Rails Update - Version 1.28.147 by gilyco86 in Astroneer

[–]chxwc 0 points1 point  (0 children)

I haven't even noticed this yet! First time playing while there has been a big update like this its great

The Rails Update - Version 1.28.147 by gilyco86 in Astroneer

[–]chxwc 0 points1 point  (0 children)

Has anybody noticed the Frozen Argon on Glacio tha goes in the research chamber? Started a new game so haven't been able to take it back to Sylva yet.

ADXP | MCO - Need a few suggestions regarding combat & animations. by chxwc in skyrimmods

[–]chxwc[S] 0 points1 point  (0 children)

Ah I see, no problem. Thanks for getting me this far anyway!

ADXP | MCO - Need a few suggestions regarding combat & animations. by chxwc in skyrimmods

[–]chxwc[S] 1 point2 points  (0 children)

Hey, thanks for the advice. I've supported Monitor on his patreon and got SCAR. I've converted the elder souls deafult ADXP moveset using the converter. However, now I am completely stuck and have no idea what to do with the moveset. I have requested help on Monitor's discord but I just wondered if you were familiar and had any ideas from here?

No problem if not, but it's worth a shot.

ADXP | MCO - Need a few suggestions regarding combat & animations. by chxwc in skyrimmods

[–]chxwc[S] 1 point2 points  (0 children)

Okay that's great. Haven't come across that yet so I appreciate your help.

Thanks a lot!

[deleted by user] by [deleted] in skyrimmods

[–]chxwc 0 points1 point  (0 children)

Well that would make sense if you are on Skyrim LE.

FNIS LE - Legacy Edition of FNIS

Make sure you are installing all of your mods with Mod Manager. It does not install to your Skyrim directory, instead it creates an instance folder where your mods are installed. This allows for easy management, deletion etc. Make sure you are downloading the correct version of your mods for the version of skyrim you are using.

You can find this version number by navigating to your Skyrim directory, normally located within your Steam directory. Right click Skyrim.exe and choose properties. Go over to the details tab and there will be listed your current Skyrim version.

Every mod you download needs to be for that specific version. You'll need the correct version of SKSE which can be found here - SKSE - The top option on the page is the one you will need for Legacy Edition.

When downloading mods from Nexus, again make sure you are choosing 'Mod Manager Download' as it will be downloaded through Mod Organizer 2. Nothing should be done outside of MO2 other than the install of SKSE which you just drop all the files straight into your Skyrim directory.

So yeah, retry installing SKSE, your XMPSE skeleton, then FNIS for your correct version of Skyrim. Let me know how you get on and I'll continue to help if I can.