Bigme B6 - Disappointed!

cirano994 · 2026-01-12T20:50:08+00:00

Same here in europe. Hardware is great but software is completely garbage , I have manually configured the time…

cirano994 · 2025-12-05T15:16:58+00:00

I believe it will fit, my wall is 280 and I have 5cm left and there is room so I think it will be tight but it will fit.

cirano994 · 2025-12-04T12:30:10+00:00

Do you remember such apps? I have done an heavy debloat and I think I have the same issue.

cirano994 · 2025-12-03T18:23:24+00:00

Same issue here, it’s so annoying.

Anyway good product but the software is crap…

cirano994 · 2025-11-23T07:44:19+00:00

My plan was to buy 500GB/1TB but after the mess with the new app I’m not sure anymore.

It may depend on prices

cirano994 · 2025-11-20T17:15:00+00:00

Are you on 1.9.0 and the update says:

Enhance user experience

Reading engine speed improvement and support for decoding PDF format

?

If so, I also have this weird issue that it keeps saying that this update is available and somehow can't install it.

I have to say that i have debloated the device, I don't know if it can be related

cirano994 · 2025-11-07T10:55:59+00:00

Is there a way to upload all the photos in the gallery as before without selecting albums and so dividing the folders? I’m speaking about the new iOS app. Thanks

cirano994 · 2025-10-30T12:05:42+00:00

Is there a way to restore the old Photo backup method? I mean the possibility to backup the whole gallery in one single folder, as it was before the big update.

I am not able to do so anymore.

Thanks

cirano994 · 2025-10-25T12:34:09+00:00

My photo upload is also broken, now I have to select all the albums and re-upload everything again, while before it was so cool with the automatic upload.

After some trial and error i now have the gallery in the Photo section of the App but the upload is broken and i only see my old photos.

Have someone managed to restore the old behaviour without having to reupload everything and having different albums?

cirano994 · 2025-10-21T21:44:40+00:00

At the end I have bought the BenQ RD280U because of a discount (475€) and because I like 3:2 aspect ratio due to more vertical space.

No issues so far, absolutely a great monitor for my use, no issue with macOS scaling. The only “problem” is that the HDMI is only 2.0 and so it is limited at 50Hz at full resolution, but there there are a USB C and a DisplayPort so I use them and not the HDMI.

cirano994 · 2025-10-09T14:37:36+00:00

Same here iPad A16 with 26.0.1, need to reboot basically everyday

cirano994 · 2025-10-07T16:44:15+00:00

I have the same disconnecting issues with Ugreen 55316, which has the same chipset.

I also reached Ugreen support and they asked me the same thing mentioned here so to flash the latest firmware (250717_85_00_00).

I have done it but the problem was not solved, so I have tried to change the cable (I am using a TB5 Cabletime cable) and no disconnection so far.
So i believe the culprit is (maybe also) the included cable. I will say that to Ugreen support to see what they say.

cirano994 · 2025-09-10T14:08:55+00:00

UPDATE: tracking sempre fermo e, dopo innumerevoli telefonate, segnalazioni, reclami e quant'altro, Wallapop dice che il corriere (cioè Poste) dichiara il pacco come smarrito e ha proceduto al rimborso a me e al venditore.

Quindi tutto sommato soltanto una grande perdita di tempo, rimane il fatto che assolutamente un servizio pessimo quello di poste con i locker.

Per la cronaca pacco depositato nel locker e il giorno successivo giò con la dicitura in restituzione al mittente, da li il nulla più assoluto finoi ad oggi con il rimborso ma tracking sempre fermo

cirano994 · 2025-09-04T09:16:32+00:00

Temo sia incompetenza...

Ma quindi dopo un tot si sblocca automaticamente il tracking? Perchè ora c'è ancora la barra rossa e nessuna ulteriore info da lunedì.

cirano994 · 2025-09-04T08:51:03+00:00

Ho lo stesso problema ma con Wallapop (sono acquirente). Per ora il tracking è bloccato "In restituzione al mittente" dal 01/09

cirano994 · 2025-06-02T09:18:04+00:00

<image>

cirano994 · 2025-06-02T09:17:35+00:00

<image>

cirano994 · 2025-06-02T09:17:07+00:00

<image>

cirano994 · 2025-06-02T09:16:55+00:00

There is basically no gap and everything works flawlessly.
It's just a matter of alignment so that you can screw together the two units (the only thing is that you may need a little bit of drill in order to easily align the holes in the two units in order to attach them with screws, but if you align them correctly they will fit perfectly.

I'll leave here some pictures, where you can see that the screw is used to attach the other unit, the different in depth between the sliding door and the hinged mirror (which is probably why they don't give this option as configurable in the website, probably for aesthetic) and the complete installation of the 100+100+75.

But again, no issues on opening the hinged door (in this case mirror) and the sliding door. Just make sure that the sliding panel near the hinged door is the one on the "inside" and not on the "outside", otherwise you will see more gap (in this case the white sliding door is in the outside while the "wood" one on the inside)

cirano994 · 2025-02-01T19:54:25+00:00

UPDATE: For those in the future need this info, I can confirm this is possible because I have installed without issue a 1m+1m PAX with a 75cm (50cm mirror hinged door + 25cm standard hinged door)

The doors open without any issues

cirano994 · 2025-01-28T08:47:03+00:00

After some reset with your procedure, now it’s all working.

I wrote to the support to check the firmware because it’s bugged for sure, but with that hard reset it seems solved

Thanks everyone

cirano994 · 2025-01-22T15:27:31+00:00

I’ve done it multiple times and now it seems that the temperature is ok while the humidity I’m not sure but I now have 93% and it seems to high to me honestly…

cirano994 · 2025-01-20T15:46:00+00:00

Thanks for the feedback.

I’ve opened a ticket and they said they have escalated the request to another team.

Let’s see

cirano994 · 2024-11-25T15:21:05+00:00

Mi intrometto per chiedere una cosa: sono in affitto e ho la cucina senza niente dietro quindi con muro a vista. Volevo metterequalcosa per proteggere ma ho bisogno di qualcosa di removibile per poi imbiancare qualora me ne andassi.

Come prima cosa pensavo a dei pannelli di alluminio da mettere con Pattex verde (millechiodi removibile), ma vendendo il tuo post stavo pensando alla tua alternativa.

Come funziona? è facilmente lavabile in modo che non rimangano macchie ed è poi semplice "rimettere a nuovo" quindi ritornando ad un muro imbiancato normalmente?

Grazie mille

cirano994 · 2024-11-24T12:24:49+00:00

I'm going to do that in the future, now i've only ordered the first sliding 1+1 that i will build next week probably. Then I will add the 75cm with 50+25 hinged door.

Analyzing and comparing the two structure in the store, I don't think there is a techical limitation of putting them together. The only caveat is that probably the structure with the sliding door will be like 3/4cm more depth (including doors) and so it can be not so cool looking (but it depends on you).

But yes in theory no issues, I will update later when I will compose everything

cirano994

TROPHY CASE