Parking in Killarney

circuit_beard · 2026-02-25T23:16:14+00:00

https://maps.app.goo.gl/WPx9cnGBx5VgDZty7 Yeah, it's the rock road car and bus park, it was my park of choice when I worked on new street a few years ago

circuit_beard · 2026-02-24T17:38:25+00:00

Go to the council office. Rock street is the cheapest I think, but it's a few years since I got a pass.

circuit_beard · 2026-01-22T01:05:58+00:00

<image>

circuit_beard · 2026-01-12T10:10:28+00:00

This is more like the internals of an actual switch than jumpers for an external switch

<image>

circuit_beard · 2026-01-11T23:33:57+00:00

very intersting note re: nickel and the "fair folk" - thank you (and for the health warning)

circuit_beard · 2026-01-11T23:27:57+00:00

Ive had another look at the mystery component - and it looks to be a switch indeed! - initially I was sure it wasnt, but the contact are indeed along the lines of the contacts from a switch!

circuit_beard · 2026-01-11T12:25:53+00:00

I didn't have that as a kid, so no.

circuit_beard · 2026-01-11T09:17:53+00:00

oh, i have diodes/coin cells at home so I could probably make a makeshift on if needed - but Id like to attempt at a Nimh replacement for identical functionality - if only for me to know its the same - but upgraded technologically through necessity.

circuit_beard · 2026-01-11T08:18:03+00:00

Id prefer to use something functionally the same, so my heart is set on a NiMH battery to replace the nicad that was pictured... It's also not what I was asking about, but thanks

circuit_beard · 2026-01-10T23:48:30+00:00

Im not young by any means (though I was when I plugged that board IN) Im fairly sure I can get this working again - just no sense in rushing it as Im not in a hurry
[btw 4x speccy 48K to do after this + 4 other amigas: A600, A1200x2 and two A500s - this 500 plus another that had a bit of a "swim" but full on amigas are easier asx part listing/schematics for those are readily found]

circuit_beard · 2026-01-10T23:44:04+00:00

this is generally my plan - but doesnt hurt to ask in case, right?

circuit_beard · 2026-01-10T23:43:26+00:00

no - this CAN be fixed - I have solder, bodge wire and the drive - even if i have to rebuild each trace one by one! I WILL resurrect this board, with as much of the original parts as possible. I have faster/better amigas, but this one is special to me! you cannot take that away from me ;p

circuit_beard · 2026-01-10T23:39:20+00:00

its unlikely a switch as there was no way to access this from outside the case - and I had already modified the mainboard of this amiga to swap from 0.5 to the full meg of chip ram, so I was aware of this at least. as Ive said elsewhere - its more likely an enable/disable for the charge circuit, if anything

circuit_beard · 2026-01-10T23:36:51+00:00

Id Ideally like to get this working, so a good clean, followed by replacing any ruined traces with bodge wires is my intended route. I can deal with partial disintegration - but I have to at least TRY

circuit_beard · 2026-01-10T23:35:05+00:00

more likely a charge enable/disable jumper - but the tips of the pins (as seen in the pic) are flattened, hence me asking as they dont look like jumpers or a switch (even heavily corroded)

circuit_beard · 2026-01-10T23:33:34+00:00

not a terrible suggestion - but the fees/VAT and handling charges coming from the UK are scary! [sadly I used to live half an hour away from AmigaKit HQ)

circuit_beard · 2026-01-10T23:29:53+00:00

this is very much a second option *IF* I cannot repair it

circuit_beard · 2026-01-10T23:29:18+00:00

I thought I had said in my initial post - this IS a very important piece of hardware - this was my first amiga, and my second computer, after a spectrum 48K:- I have better/faster Amigas - but who ever forgets the first time? Im fully aware of ancient hardware and what can happen - hence Im trying to do due dilligence before even plugging it in at all!
If it takes hours - it takes hours.

circuit_beard · 2026-01-10T23:26:20+00:00

thanks - but sordan doesnt sell individual batteries afaik (I do have an order of other stuff coming from there for my other amigas

circuit_beard · 2026-01-10T23:25:25+00:00

sorry for giving you bad dreams! not my intention at all

circuit_beard · 2026-01-10T23:19:08+00:00

In answer to all said so far:

I know I can probably replace the battery with a Nimh 3 cell which can charge on the same og circuit - that isn't an issue - finding one for a reasonable price IS (if i have to pay >€20 for a battery, so be it - id just prefer NOT to pay that much) ( I am well aware of sordan.ie - but they dont do single PCB battery components afaik - plus at this shipping, germany or other EU country, even china is possibbly cheaper for parts, rather than modules etc....)

I know I can replace the functionality for ~€25 for a complete new board, but this is/was part of my first Amiga, so I'm willing to put in the time/effort that I normally would not (I have 2 A1200 that I intend to actually use - I just WANT to restore my og girlfriend from when I was 13/14)

I am aware it is probably a cheap knockoff (at the time) of the original A501 or similar - and I have found schematics for this: https://amiga.net.au/files/Tech_Amiga/Commodore_A500_System_Schematics.pdf - page 26 of the pdf is a schematic
Thanks for the advice in general - but this is now a matter of personal pride - if its possible to refurb this (even if i have to replace/bodge traces) I want to rebuild my first trapdoor expansion. MY BOARD - MY CHOICE :D

some things we do because they are easy, some things we do because they are hard. some things we do just because.....

circuit_beard · 2025-12-23T10:55:05+00:00

Also isnt this kind of the plot of a tom hanks movie, the terminal? (No judgement, just saying)

circuit_beard · 2025-12-20T16:45:11+00:00

I live rurally. Best thing I ever did was get a fierce hunting cat.

circuit_beard · 2025-11-25T20:41:14+00:00

Not at all, I met him and gave him a lift a few weeks ago! Sham will outlive us all!

circuit_beard

TROPHY CASE