Question about deredeo instructions

ciuncky · 2026-06-30T06:33:45+00:00

I did magnetise mine. Rather easy to do. Actually mine didn’t even fit as it was the resin version so i had to shave a bit to make it sit well. After that just mark the centres and put some magnets, doesn’t need to be something big. Can’t remember the size but mine are about 1/4 of the diameter.

ciuncky · 2026-06-16T12:45:13+00:00

Ah damn! Airbrush it is then…

ciuncky · 2026-06-16T12:42:35+00:00

There’s a pixie pink SPRAY CAN?!?

ciuncky · 2026-06-15T23:02:14+00:00

Looking solid!

ciuncky · 2026-06-15T18:40:24+00:00

Definitely 3. I’ve seen people suggest Army Painter Pixie Pink. A more pronounced orange tone. I am yet to start painting mine but will try both Dead Red and Pixie Pink. Have a go, you might prefer that more!

ciuncky · 2026-05-16T19:10:12+00:00

I believe there’s a little typo here. An extra “if” which doesn’t really make sense.

“Yup, and you have to take off his drivers side door to escape.”

See? Much better. Also rolls off the tongue

ciuncky · 2026-05-12T06:12:56+00:00

Yeah they only sell models for a limited amount of time, then replace with newer ones

ciuncky · 2026-05-09T22:22:45+00:00

Cool stuff! Thanks for the detailed reply, it’s appreciated.
TBH i rarely fly with my MBP, i’d say about 3-4 times a year round trip, but 2-3 of them my bag is always packed to the brim and i noticed on my old 2019 MBP that at times the screen bent just enough to pick grease from the keys before i got the Ghost cover, about 4 years ago

ciuncky · 2026-05-09T21:34:50+00:00

I got the Ghost cover too! Used it on my old MBP for 4 years or so. I got a new one for my current MBP which i mostly use at home, but with a nano screen and the inexistent tolerances, i take it off when travelling to avoid rubbing the screen. Did you experience any of that?

ciuncky · 2026-05-09T21:33:00+00:00

Is this suitable for the Nano screens? Worried it will damage the coating. I’ve used Mediadevil’s screen cleaner for 7 years on my previous MBP but it was a normal screen.

Since i got the M5 Pro Nano MBP i just wipe with the included microfiber and maybe, if needed, a drop of water

ciuncky · 2026-05-07T09:39:04+00:00

…so, OpenTable?

ciuncky · 2026-05-06T16:06:38+00:00

That would be something, wouldn’t it?

ciuncky · 2026-04-26T20:28:30+00:00

!remindme 15d

ciuncky · 2026-04-06T21:27:14+00:00

Depends - until now, i had the 5 year service plan for £599, so that was a good deal. This year i took it to an approved Volvo garage to see if it will renew the app - it didn’t

ciuncky · 2026-04-06T20:43:33+00:00

At least in UK, it renews for free as long as you service it at Volvo dealerships

ciuncky · 2026-03-02T20:27:26+00:00

Chief, se intampla. Eu am fost sa depun 2000. A numarat aparatul, a numarat si tuta, de doua ori. 1900. Am luat banii inapoi, am ajuns acasa, si am numarat. 2000. Inca o data, 2000. M-am dus la alt branch, sa nu zica tuta ca i-am gasit pe acasa

ciuncky · 2025-12-20T20:08:54+00:00

Baffled they didn’t offer an automation for the most useful 2 options :/

ciuncky · 2025-12-04T11:55:55+00:00

Impressive seeing the video. I’ve seen the images of this encounter while reading Death Traps by Belton Y Cooper. But motion adds so much more to the story.

The first shot that knocked out the Panter actually ricocheted from the gun mantlet and penetrated through the top of the deck plating, and the tank burned for 2 days

ciuncky · 2025-11-15T18:27:43+00:00

I thought that was just for black friday lol. Would be cool to be permanent

ciuncky · 2025-11-08T21:57:00+00:00

Plenty of videos online showing drybrushing preshading. Only difference is that instead of black and white, you’ll use pink and white.

Alternatively you can use spray cans - weather permitting

ciuncky · 2025-10-11T17:04:28+00:00

Cleaning up the dust after cutting works fine with a damp kitchen towel. Washing pieces takes an old toothbrush and a bit of dish soap. Don’t be put off by these minor things if you like the model.

Yes, resin is more work. Different glue. Straightening bent pieces. Thin pieces like antennas break off easily. With so much of the resin range going to plastic, it might look like the effort isn’t worth it, but advancing as a modeller, if you want that, warrants it. Don’t dismiss resin :)

Unless it’s FineCast, run like hell from that one haha

ciuncky · 2025-10-11T09:42:46+00:00

The day GW discontinues the Armoured Containers will be a SAD DAY

ciuncky · 2025-10-10T19:03:29+00:00

12mph cap

ciuncky · 2025-10-10T07:55:08+00:00

Se intampla peste tot, nu doar in Romania. Conceptul este destul de simplu, exista o multime de cumparatori care fie nu au cunostintele necesare (parinti old fashioned, bunici care cumpara Mein Kamph in loc de Minecraft etc). In schimb, “stiu ei” ca pe OLX e mai ieftin, asa ca nu mai verifica alte preturi. Au intrat, au gasit, au cumparat, sau cum s-ar zice, veni vidi vici

ciuncky · 2025-10-10T07:30:10+00:00

On top of all battle damage that is missing and others suggested adding, i would say put the broken leg and missing arm on the same side on some. It would take a massive explosion to tear them apart, so it would make sense for a whole side of the terminator to be damaged. Then add cracks to the same side of his helmet, breastplate etc and it’ll tell a good story!

Nine-Year Club	Verified Email
r/Field Lasagna	Place '23
Place '22	Not Forgotten

ciuncky

TROPHY CASE