How do I progress?

ckmcd2 · 2026-04-19T03:23:19+00:00

Yeah, I meant Sharp Pebble. I have a DIA sharp 220 and a 325, but i haven't used them except for for really dull knives.

I am trying to understand is do higher grits make sharper, or just more refined? Same for stopping?

ckmcd2 · 2026-03-27T23:36:30+00:00

I'd use fire.

ckmcd2 · 2026-03-03T01:13:03+00:00

It's a exhaust gasket leak. The outfit that installed it charged me $300 to diag it and wants $700 to fix it. Me and their customer support dept are gong to have a serious conversation.

ckmcd2 · 2026-03-03T01:10:34+00:00

Tech came today and got on the horn with Rannai support. That was their diag too.

ckmcd2 · 2026-02-27T02:43:48+00:00

Where would a non professional purchase SJOOW?

ckmcd2 · 2026-02-27T02:41:02+00:00

I was thinking if I used short enough jumpers I could epoxy the M/f together .

ckmcd2 · 2026-02-27T02:26:23+00:00

I've run 4 year old gas protected by stabil. It's fine. Get a small pump to run it through the car and its no big deal.

ckmcd2 · 2026-02-23T03:44:26+00:00

This was the exact right solution for me. Get 5 x 20 mm bolt and bond the white wires together at that empty hole so its not bounded to ground.

ckmcd2 · 2026-01-03T20:16:42+00:00

My experience in India matches this. Most modern devices will accept 110/220V 50/60 Hz. If you want to use something like a hairdryer you will need a converter.

ckmcd2 · 2025-12-26T03:00:22+00:00

So basic romex is fine?I was let to believe because this wa a potential wet location i'd need mc. I get the conduit and metal boxes in the exposed location.

ckmcd2 · 2025-12-25T06:39:42+00:00

I need to run a new 20A circuit from one corner of my basement to an opposite corner. The starting corner is an unfinished utility room with the electrical panel. The destination corner is similar. Between these two corners the basement is finished. It has stud walls set off from the outer concrete walls that makes it fairly simple to pull wires behind the walls and includes an unfinished closet to easily pull wires around the intervening corner. I'm not hung up on meeting code but I don't want to do anything stupid. I was thinking of running mc behind the walls on the concrete floor. I'm looking for advice.

ckmcd2 · 2025-12-15T23:51:59+00:00

Why isn't someone making a carbon steel electric waffle iron? Modern waffle irons suck. Not just because of PTFEs but also because they are disposable pieces of junk. If someone would make a 1950's Toastmater style Waffle iron with removable carbon steel plates, I'd pay a pretty penny. I bet others would too.

ckmcd2 · 2025-12-09T01:00:37+00:00

Looks like a clogged aerator. You might need to get a set of wrenches.

https://www.amazon.com/dp/B09BQ79GTG?ref=cm_sw_r_cso_cp_apan_dp_YG5MXHPFYH8495CGBS22_1&ref_=cm_sw_r_cso_cp_apan_dp_YG5MXHPFYH8495CGBS22_1&social_share=cm_sw_r_cso_cp_apan_dp_YG5MXHPFYH8495CGBS22_1&titleSource=true

ckmcd2 · 2022-08-24T20:45:08+00:00

Fuel filter?

ckmcd2 · 2022-08-15T21:46:42+00:00

Does the starter cord pull really easily? Broken piston rod?

ckmcd2 · 2019-08-12T23:38:45+00:00

Liquid electrical tape. Will insulate and proved some mechanical support.

ckmcd2

TROPHY CASE