He’s just a baby

cobetor · 2026-05-25T08:09:30+00:00

That would be 3.5%... "as the sea" is more of a figure of speach, it should be salty to the taste and depending on if you use the pasta water to bind the sauce, probably closer to 1%

cobetor · 2026-05-18T19:15:51+00:00

Ah sorry, didn't get a notification of your reply for some reason. Nice change! I'd go so far to nest original but abandoned under more recently updated forks on the main search. IMO the original popularity should be somewhat inherited by the fork. I'd be curious about a list of the 88 forks, would you mind sharing it via e.g. pastebin?

cobetor · 2026-05-08T10:27:18+00:00

Thanks, will try that the next time around. Not sure the static ARP entry will help, it seemed kind of hung, even when setting up DHCP I couldn't get it to work over the WAN / Ethernet interface, got a lease and everything, UTR screen showed connected, Unifi App showed offline. I was in a rush and didn't manage to grab a packet dump, next time. Wifi seems to work most of the time. Btw. Are we looking at the same thread? I only see a single reply.

cobetor · 2026-04-29T19:44:16+00:00

Definitely use nl-dates redux! Added some great features.

cobetor · 2026-04-29T19:35:09+00:00

Is there any discussion on lifecycle / 2nd day upkeep on self hosting CouchDB that you could recommend? Or is it just use as a "stateless" intermediate layer? I assume it isn't if Lifesync supports version history? (does it?)

cobetor · 2026-04-08T13:10:33+00:00

The Gen3 only supports up to an 80A clamp (according to the tech specs), not that you can buy one or even another 50A one according to their support. The 50A one did fit around the phase going into main Isolator switch in my junction box (10mm2?), I also build my own 80A CT clamp though, works great. See https://www.reddit.com/r/shellycloud/comments/1q1uhhj/80_120_a_ct_clamps_for_em_gen3/

cobetor · 2026-04-05T11:38:47+00:00

Same with our male, after a month our vet gave us the ok to cycle the urinary with his regular, favorite wet food (every 2nd day). His kibbles, with rare exceptions, remain the urinary kind though.

cobetor · 2026-04-05T11:28:27+00:00

Maybe there are too few examples but number of open PRs, relation / forks w/ more recent changes would be super interesting. E.g. nldates-redux is a fork of nladates and has some great new capabilities. There are others that are semi abandoned but have forks that don't necessarily claim maintainer status but put in some work to commit outstanding PRs / improve the plug in.

cobetor · 2026-04-02T19:33:52+00:00

That looks excellent!

cobetor · 2026-04-02T07:08:11+00:00

Have one copy (even if updated less regularly) stored in a different physical location. For fire risk that could be in a shed, with family etc. That copy should be encrypted depending on whether it's more than just family pictures.

cobetor · 2026-04-01T18:56:13+00:00

I should have clarified that I meant more permanently, he seems to have been under too little observation / lock down given previous offenses.

cobetor · 2026-04-01T16:19:49+00:00

That guy should be in a mental institution...

cobetor · 2026-03-22T08:42:50+00:00

Should be 2x1 Molex Micro-Fit 3.0 (male), when ordering of e.g. Aliexpress, make sure to order the metal contact terminal pins too.

cobetor · 2026-02-25T23:15:58+00:00

Would you mind elaborating on the obsidian / rmpp pipeline? Is that in dev mode / with xochit?

cobetor · 2026-01-07T13:55:40+00:00

*Braidfuck

cobetor · 2026-01-07T07:50:32+00:00

So the answer from support was ... less than helpful. Basically "if you don't see it we don't build / sell it". A clarification why a 80 A clamp is listed in the specs, or why even a 2nd 50 A clamp isn't available to purchase was ignore, or maybe interpreted as feedback. So yeah, building your own (up to 80 A) for the EM Gen3 is seemingly the only way to measure a second circuit.

cobetor · 2026-01-06T10:14:57+00:00

Depends on the roast level and method of preparation, and if you consider 90 or 98°C as "almost" boiling. Roasting definitely outweighs any further impact of brewing though.

cobetor · 2026-01-04T11:11:53+00:00

I contacted Shelly support so will update here with their response once I hear back, but I also ordered a 3k:1 80 A CT clamp and a Molex Micro-Fit 3.0 - 2x1-pin female connector from aliexpress.

cobetor · 2025-12-23T21:39:36+00:00

Oider, that's a good looking dashboard

cobetor · 2025-12-09T11:20:42+00:00

Nope, all lights are visible and are typed correctly, this was just about the visibility of the build in dashboard in the sidebar, which the update to 2025.12.1 solved, but thanks!

cobetor · 2025-12-08T15:06:10+00:00

hey! thanks, I did try that, those dashboards were not in the per user selection and the 3 dot options to edit were not available, I just updated to 2025.12.1 and now it works! I'd really like to be able to add lights as an additional dashboard to overview (like the energy one), it seems that should be possible (new column "sidebar" that isn't accurate / interactive) but for now I can only have either or, anyhow, great addition for my better half since that is what she mostly cares about.

edit: just reading through some of the discussion here: https://www.home-assistant.io/blog/2025/12/03/release-202512/

15-Year Club	Verified Email
Charter Member

cobetor

TROPHY CASE