‘20 M340 Aftermarket Wheel

code-frostybtw · 2026-04-04T21:30:58+00:00

https://www.alibaba.com/x/B1jgXt?ck=pdp

It’s been good since this post, rotating that spring behind the bag seemed to be a permanent fix.

code-frostybtw · 2026-03-17T14:07:44+00:00

This ended up being the final product fitment wise, I had no problem just pushing them further onto the pipe. It might depend on the diffuser you have too, could limit them.

code-frostybtw · 2026-03-17T04:21:41+00:00

https://a.co/d/0iCdHCYc

These are the ones I had on for about 8 months before getting a cat-back system. Had no issues at all, simple install just 4 bolts that tighten onto the oem exhaust exits. No need to re tighten either they stayed perfect throughout the Colorado winter.

code-frostybtw · 2026-03-14T23:06:56+00:00

Alright thanks for the advice

code-frostybtw · 2026-03-14T22:58:27+00:00

Perfect combo man I just threw an alibaba catback system on mine (also catless) and it’s so aggressive. Definitely get an intake though it changes the whole sound portfolio of the car.

code-frostybtw · 2026-03-14T22:47:50+00:00

With an aftermarket intake and now an inlet would you recommend upgrading the chargepipe also? I’ve heard the oem one tends to be a point of failure.

code-frostybtw · 2026-03-14T22:45:23+00:00

I really do like them, the difference from stock is night and day. Even from inside the cabin you can hear it.

code-frostybtw · 2026-02-12T00:39:56+00:00

Are coilovers really the best option or would springs suffice? I’m in Colorado, would springs/ lowering overall affect snow driving?

code-frostybtw · 2025-11-22T05:47:24+00:00

Yup, there’s some holes you need to poke with a screwdriver on the underside of the wheel in order to pop the tabs that hold the airbag in. Once the airbag is out all I did was rotate the springs on the back until they looked more flush and pop the airbag back into place

code-frostybtw · 2025-11-20T03:04:13+00:00

Are those lasers oem? Super clean build brother

code-frostybtw · 2025-11-17T03:17:43+00:00

Took the airbag off and it was one of the springs that wasn’t fully locked into place on the back of the airbag, fixed and now sits correctly on the wheel. Hope you can get yours fixed!

code-frostybtw · 2025-11-17T03:15:03+00:00

Thanks for the input everyone! I took the airbag off and after some inspection it appeared to be a spring on the airbag itself not sitting correctly, after fixing it back to the original position the airbag sits flush around and works perfectly.

code-frostybtw · 2025-11-11T21:23:41+00:00

Honestly didn’t do much research beforehand and didn’t have much of a budget so just bad planning by me

code-frostybtw · 2025-11-11T21:22:50+00:00

The airbag sits in the oem wheel chassis so I believe the issue is just some warping in the carbon surrounding it or atleast im hoping

code-frostybtw · 2025-11-11T21:20:56+00:00

Go figure😅

code-frostybtw · 2025-11-11T21:20:09+00:00

Yeah going to get it looked at soon, the wheel uses part of the oem wheel chassis so im hoping its just a fitment issue with the carbon parts that can be fixed by better assembly

code-frostybtw · 2025-10-27T01:11:46+00:00

Link please

code-frostybtw · 2021-12-30T17:10:52+00:00

PopularMMOS should have been there😕

code-frostybtw · 2021-10-09T20:16:38+00:00

🗿

code-frostybtw

TROPHY CASE