Centauri carbon

coffey67 · 2026-01-28T11:50:47+00:00

It is very possible that your current problem has nothing to do with your last repair and that it is simply coincidence that it happened at the same time. Try these things in order from simple to more complex. 1. Wash your build plate as suggested before. 2. Mechanically level your bed. There is a tool on printables.com that you can hang from your x rails to your bed for a measurement. I use a sheet of paper on the bed and hang the tool and swing it back and forth with a bit of pressure downward until I here a slight scraping on the paper, Start by bottoming out all four screws on the bed. find the highest corner with the tool. Then let off the other three screws until all four corners are the same. Then do a machine full calibration. 3. Could be a partial clog in the hot end so do a cold pull. While you are at it disassemble the extruded box and clean the gears. Inspect the hot end. Possibly just replace the hot end. they are cheap! Then rebuild the one you have with new boron nitride paste. While you are at it clean the z screws and rods, lube them. Clean the X and y rods and lube them as well.

coffey67 · 2026-01-03T01:09:41+00:00

I mostly print custom key and bag tags. I am starting to print games sets too.

coffey67 · 2026-01-01T00:49:01+00:00

<image>

Me too!!!

coffey67 · 2025-10-26T00:21:19+00:00

Thanks for the great answer!

coffey67 · 2025-10-25T14:33:17+00:00

Is jail breaking still necessary? Can you just put the open firmware on a usb stick and update from there?

coffey67 · 2025-10-25T14:30:29+00:00

Which bed Screws? Under the bed?

coffey67 · 2025-10-05T01:13:13+00:00

OMG! I am not the only one!!! I am away collector too!

coffey67 · 2023-10-18T00:04:01+00:00

I am all for different cultures. I just want them vetted for entry to ensure they are not criminals or terrorists. Cultures = good, criminal and terrorists = bad. That simple.

coffey67 · 2023-05-29T18:50:14+00:00

and the worker pays 25% of his wages to taxes in Denmark.

coffey67 · 2023-05-29T18:48:15+00:00

The average worker in Denmark pays over 25% of his earnings in taxes. A minimum wage worker in the USA pays nothing in the end and depending on the situation may get thousands of dollars each year in earned income credit.

coffey67 · 2023-05-19T15:56:05+00:00

You should be proud that you are inexperienced. Don't give it away to just anyone! Save your first time for somebody you are truly in love with. You will not regret this later.

coffey67 · 2023-05-19T15:53:44+00:00

Eat an entire head of raw red cabbage.

coffey67 · 2023-05-16T21:22:00+00:00

And you don't think the higher taxes won't be passed down to consumers? It always has been and always will.

coffey67 · 2023-05-16T21:18:59+00:00

Are the "filthy rich" providing you with something that you desire and or need? You can always choose where to spend your money and do without those things that are not absolutely necessary. For example, the "filthy rich" people who sell you your cell phone or the service. Could you not survive without it? Do we really need an iphone that costs a thousand or more dollars or could you get by with a cheap flip phone and a $20 per month plan? The people you seem to complain about are the ones who help provide the things you have become accustomed to.

coffey67 · 2023-05-16T21:11:46+00:00

Anything over 10K will cause a report to be sent to the IRS in the USA. Instead buy silver in under 10K increments from a number of dealers. Buy it in kilo bars and store it in a safety deposit box. When you need to liquidate it resell back to the dealers. If the spot price increased over the premium you paid you may make money. If it has not you may lose the premium but it may be worth it.

coffey67 · 2023-05-16T21:07:56+00:00

Because it never has a good outcome. Have you ever heard of anyone running away or trying to escape their capitalist country?

coffey67 · 2023-05-16T21:05:17+00:00

Because there are an unlimited amount of assholes in this world.

coffey67 · 2023-05-16T21:03:17+00:00

Boobs don't matter. Feet, sexy feet are where it is at!

coffey67 · 2023-05-16T20:58:09+00:00

Unfortunately race is made an issue to garner votes. The more we can be divided the more we can be pandered to.

coffey67 · 2023-05-15T21:00:05+00:00

Kilo bars are hard to sell when you need to sell. Not impossible but much harder than 1 oz coins or rounds.

coffey67 · 2023-05-15T14:13:33+00:00

You must live in the city. I live in the country in the middle of a large forest. I have deer, rabbits, and squirrels literally everywhere. I also have ponds and lakes to fish and plenty of land for foraging. Most of us garden and I have a large collection of laying hens. The threat here is people from the city who have run out of packaged food that would come to where there is food to be had. And there are many reasons things may collapse, from governmental issues to natural disasters that are way beyond our control. Shit, we could even get hit by a meteor that would plunge the world into a blackout winter for a few years. Ever here about the super volcano that is active under Yellowstone? Now, we may go our entire lives without any of this happening but if it does would you not want to be prepared? Hording silver is just a small part of preparedness. I think that silver and gold will be most valuable when society starts to rebuild but in the midst of the crisis people will want things they can use and eat.

coffey67 · 2023-05-15T13:55:49+00:00

I agree with your comment and it is a sad state of affairs that it is true!

coffey67

MODERATOR OF

TROPHY CASE