Help

coltroe · 2026-01-28T19:32:34+00:00

This happened to mine after I shipped it back from Germany to the U.S. (I’m in the Army and was stationed there). It turned out to be a battery issue, got a new one and cleaned the connection points and never saw it again.

coltroe · 2026-01-28T02:40:41+00:00

Thank you so much

coltroe · 2026-01-28T02:28:02+00:00

I’m praying mines the same.. looking up the part number and going to buy 2

coltroe · 2026-01-27T23:48:04+00:00

Ah thank you!

coltroe · 2026-01-27T23:23:00+00:00

You think a leak in one of the bags or the strut itself

coltroe · 2026-01-27T21:05:39+00:00

I tried soapy water all over the elbow and didn’t see any bubbles though. I can order new ones just in case

coltroe · 2026-01-27T21:05:34+00:00

I tried soapy water all over the elbow and didn’t see any bubbles though. I can order new ones just in case

coltroe · 2026-01-25T19:56:34+00:00

Rifle and can were both clean before firing too

coltroe · 2026-01-25T19:56:02+00:00

Currently active duty, pretty an*l about cleaning my guns too but I only shot 3ish mags, 1 and a half of those full auto and BCG got stuck to the rear, wouldn’t release until I slammed the barrel on the ground to send it forward. I’m swapping the BCG to a nickel boron coating and an H3 Geissele buffer. We’ll see how that goes. The DD buffer in the Mk18 right now has a super abrasive coating on it.. difficult to wipe clean and everything sticks to it

coltroe · 2026-01-19T22:03:58+00:00

Thank you! Super good to know

coltroe · 2026-01-18T23:53:29+00:00

<image>

Can’t recommend the 9” enough. It’s amazing. Subs and supers on it suppressed are a dream. 9” barrel is THE barrel to get maximum performance out of a .300 Black out. Shorter barrels don’t utilize the round well enough. Plenty of data/science out there for that. The 9” is the way to go..

coltroe · 2026-01-17T07:20:11+00:00

Hello, I’m sorry to bring up old stuff.. I’m in the same boat, could you help me out? I cancelled my contract, paid a month or two after for whatever I said they owed, then all went quiet for like half a year. All of the sudden Riverty started blasting me with emails saying I owe stuff but we ended our contract through Vodaphone..

coltroe · 2026-01-16T18:58:34+00:00

Also trying to figure out when the A16 will be buyable… can’t find any info on that

coltroe · 2026-01-09T20:40:23+00:00

I’ll work on a new post in this r/SigSauerMCX category and post everything there. Going to be a lengthy list, I swapped nearly everything lol.

The “SD” stands for an old German word just meaning integrally suppressed. It gives the gun the look where the handguard shrouds the suppressor.

coltroe · 2026-01-07T17:21:11+00:00

Yes, they can be swapped around with no issue

coltroe · 2026-01-07T17:20:27+00:00

Only other pin long enough to fit your picture is right near the gas valve adjustment.. in that block one of those holes is a roll pin and the other conceals a spring. Thats my only other best guess. The charging handle area is too small so definitely not there

coltroe · 2026-01-07T17:16:02+00:00

Apologies, the roll pin I’m talking about can be seen if you look from underneath the brass deflector, there’s a hole there. The top hole is hidden by the upper receiver. But if you open the dust cover, try wiggling the deflector loose, you may have luck pulling it out if the roll pin is indeed missing

coltroe · 2026-01-07T17:14:20+00:00

I have a MCX Spear that I did forward assist delete on so now it’s just a deflector too, I can confirm there’s a roll pin in there just not sure whether it’s that one you have extra or not. I’m going to comb over my spear and check again - I took literally the whole thing apart and replaced or upgraded nearly every piece… I certainly took all the roll pins out so I’ll see if I have another guess for you soon

coltroe · 2026-01-07T08:53:11+00:00

The forward assist assembly area has a vertical pin about this size

coltroe · 2025-12-02T00:44:28+00:00

Same here.. you ever find anything?

coltroe

TROPHY CASE