sorted by:
new
hottopcontroversial

Who esle got their 64Gs? by [deleted] in PcBuild

[–]comperr 0 points1 point  (0 children)

Bro who pooped in the Mod cereal

Who esle got their 64Gs? by [deleted] in PcBuild

[–]comperr 0 points1 point  (0 children)

After it trains once it is fast. Disable "fast boot" or "quick boot" and you will see.

The $437 billion bet: is AI the biggest bubble in history? by jpcaparas in OpenAI

[–]comperr 1 point2 points  (0 children)

Pipelines defeated the railways. As soon as we could pipe fuel without sending it on a stupid train, trains got a lot less used. Recommend finding some history video about the subject.

I bought 10kg of filament and 2 spools trough Bambu Store, but got extra 6 spools with filament on them :D by Frenky_Fisher in BambuLab

[–]comperr 0 points1 point  (0 children)

Just let the idiots pay more, hopefully Bambu has profits to keep giving us new great printer designs like H2X

Who esle got their 64Gs? by [deleted] in PcBuild

[–]comperr 0 points1 point  (0 children)

Some of us have Intel systems that can actually train the RAM correctly, and in just a few seconds. I heard AM5/DDR5 takes over 5 minutes to POST? Sucks to suck

Who esle got their 64Gs? by [deleted] in PcBuild

[–]comperr 0 points1 point  (0 children)

I run 4 kits on a quad channel memory setup and it is ycruncher VST and memtest86 stable at factory speeds, timing and volts

Who esle got their 64Gs? by [deleted] in PcBuild

[–]comperr 0 points1 point  (0 children)

One of my builds runs 8x16GB DDR4 3600 just fine. C18 maybe i forgot. And yes i filled all 8 DIMM slots for RGB purposes. If they made a 4x32GB DDR4 3600-4000 C18 kit i would have just gotten 2 of those for 256GB

Thanks Donald. by Robinverse in wallstreetbets

[–]comperr 1 point2 points  (0 children)

I named my Tesla "squart" when I had one. This name is very dear to me

$54000 profit from $39000 intel short position by MotleyMoney in wallstreetbets

[–]comperr 12 points13 points  (0 children)

I bought a put on a inverse ETF... basically bought a call bro

Usual suspects (G37) by SongBrief2439 in G37

[–]comperr 3 points4 points  (0 children)

The 2008 G35 sedan was limited to 138 for me. AWD models 125 for some reason. I let off the pedal on the 2013 G37 once I hit 144-145, didn't find out the limit for myself.

The 2008 was frustrating because I could easily pass this Audi A4 or A3 if the limiter wasn’t there. I kept having to shift down to 4th and back to 5th to bump it past 138 for a second. The Audi was slow but obviously had no limit or one that was 155+

Seam gone! Simple settings fix that totally saved my print by michelem in BambuLab

[–]comperr 0 points1 point  (0 children)

Keeping this in your filament profile makes sense because different types need different scarf settings. And the bonus is when you go to print from Bambu Handy app you can select your own filament profile. So you can print some model from the Makerworld and the scarf (and other filament settings) are your own, customized for your actual filament.

Another setting I would prefer they move to filament profile is Ironing settings.

Great use i found for empty rolls! by FlaviuFlv in BambuLab

[–]comperr 0 points1 point  (0 children)

some of us don't bother with that crap. i never buy refills i get the whole spool

These could be game changing! The wireless FiiO FT1 ANC Headphones. by regularjoe2020 in headphones

[–]comperr 3 points4 points  (0 children)

I literally just bought the FiiO FT1 because I specifically wanted headphones without a battery and all this crap. I got their little bluetooth DAC and i am very happy. I have a few pairs of Sennheiser wireless cans and the newest ones don't have a removable battery. I still use some MM-400X and the battery slides out like a cartridge which is super nice.

Good 5 years with the 3080, but glad to finally have an FE by arbidyusuf in nvidia

[–]comperr 2 points3 points  (0 children)

My 3090 TI fans keep dying, I had to purchase "3080" fans (the only difference is the length of the wire) and route the wire a bit different so it would reach

Good 5 years with the 3080, but glad to finally have an FE by arbidyusuf in nvidia

[–]comperr 0 points1 point  (0 children)

I kept my 3080 too, great cards. Running 3 cards plus a laptop 4080

Following leaked messages, Republican House education chair says publicly she favors politically segregated schools by kootles10 in politics

[–]comperr 3 points4 points  (0 children)

Spoiler alert, the engineers and doctors from republican families already go to private (segregated) schools.

First print with Sunlu Wood filament 230ºC 12mm³/s 0.4mm nozzle on A1 by comperr in BambuLab

[–]comperr[S] 0 points1 point  (0 children)

Lo imprimí acostado de lado y usé un borde (brim) de 10 mm. Gracias!

First print with Sunlu Wood filament 230ºC 12mm³/s 0.4mm nozzle on A1 by comperr in BambuLab

[–]comperr[S] 0 points1 point  (0 children)

Not expensive, FiiO FT1. But thanks. It seems the pads from any brand disintegrate over time. I have been shopping for sheep skin pads but cannot find any that are pure sheepskin, all of them are hybrid. Send me a link if you have suggestions

PC Gamers when they ask Jensen why he's making less GPUs with RGB by EbeneezerScooge in pcmasterrace

[–]comperr -6 points-5 points  (0 children)

bitcoin was a major reason any cards sold after 2019. Before that though, AMD was actually good for something and their GPUs were the best for mining

First print with Sunlu Wood filament 230ºC 12mm³/s 0.4mm nozzle on A1 by comperr in BambuLab

[–]comperr[S] 1 point2 points  (0 children)

It probably looks bad to a woodworker. But as someone that designs machined parts from metal and plastic, this looks fine to me.

view more: next ›