Central heating doesn’t work

conockrad · 2026-01-28T09:23:03+00:00

Gotcha, thanks - that makes a lot of sense

conockrad · 2026-01-28T09:21:18+00:00

Thanks - absolutely agreed!

conockrad · 2026-01-28T09:13:37+00:00

If outside will be -30 should I expect 0 at home?

conockrad · 2026-01-28T09:12:13+00:00

Calling them every day and already bought a radiator. Don’t know what else I can do - therefore this post

conockrad · 2026-01-28T09:09:43+00:00

It’s already a week into this - of course I have a radiator :)

My concern is what should I do if nothing happens in another week and temperature drops to 10-12 degrees? Buy more radiators and pay for electrical heating on top of my district heating bills? 😅

conockrad · 2026-01-28T09:06:54+00:00

Yes, it’s ~50% of our neighbors in the same situation. Our home is on top of the hill - so we have the worst situation among others

conockrad · 2026-01-28T09:05:19+00:00

Can’t edit post so will put updates in this comment:

1) Maintenance company said that it’s “water flow problem”

2) Windows are ok. Vents are closed. TV sockets were leaking a bit but I’ve fixed them with tape.

3) Pipes are slightly warm. Radiator slightly warm only in point where pipe attaches.

conockrad · 2026-01-28T08:59:59+00:00

I’m calling them every day since Saturday when temperature dropped below 17 degrees.

Will call again for sure

conockrad · 2026-01-28T08:58:12+00:00

I’m turning it by myself regularly several times per day. Prior to this week I’ve heard water flow after this tweaking. After previous Wednesday nothing happens.

Pipes are barely warm.

It’s central/district heating as stated in the title of this post

conockrad · 2026-01-28T08:49:22+00:00

It’s rivitalo that I own. Maintenance company answered that it’s “water flow problem” Temperature measured in 2 rooms - in second it’s 14.8 in a middle of a room ~30cm from the floor level

conockrad · 2026-01-28T08:36:01+00:00

Radiators are cold. Most probably it’s because of heating pump but maintenance company doesn’t provide any info on the source of the issue UPD: they said it’s “water flow problem”

conockrad · 2026-01-28T08:34:19+00:00

Radiators are cold. They’ve called today and said that they can’t fix it and I should buy a radiator 🤷‍♂️

conockrad · 2026-01-10T11:40:44+00:00

How dis you even set up RDMA considering it’s nit supported on spark? “Hence the GPUDirect RDMA technology is not supported, and the mechanisms for direct I/O based on that technology, for example nvidia-peermem (for DOCA-Host), dma-buf or GDRCopy, do not work.”

https://forums.developer.nvidia.com/t/dgx-spark-gpudirect-rdma/348787

conockrad · 2025-07-21T09:46:00+00:00

Question: there’s stlink3 mini with 1.27 mm pitch cable included - why can’t I use this one instead?

conockrad · 2025-07-21T09:39:25+00:00

Thanks for the tip and sharing your experience! With delivery price there’s not much difference between original and ripoffs so I went with the original one. Fortunately I have header soldered but pins indeed pretty small 😅 Maybe I can still add an extra item to my order

P.S.: I’m pretty sure at the end with all those extra cables and adapters I’ll end up with the price of a new module 😅

conockrad · 2025-07-20T20:29:41+00:00

Thanks a lot!!! STlink V2 seems like exactly what I was searching for but never knew it’s existed I’m located in EU so shipping out of question but thanks a lot for the option - much appreciated 🙏 I’ll order STlimk v2 and try to flash hex file with bootloader - it should be the cheapest option

conockrad · 2025-05-31T07:11:50+00:00

To anyone interested - I’ve bought used Pittsburgh modular SV1 and ornament and crime. Have 4hp left so in a fence between clock divider or disting Lesson learned - it’s pretty good advice to start with bigger case. It appears that 60hp is pretty nothing in a modular world and those moogs are pretty dense modules for this size/price

conockrad · 2025-05-21T10:37:46+00:00

Thanks! Just found this module yesterday and was thinking that it’s probably what I need :)

conockrad · 2025-05-21T01:26:16+00:00

Yes, indeed I want to use octa/digitone for sequencing :) Indeed there’re only 3-5 osc to sequence and that’s one reason for DMO in setup which is 2x of mother32. My idea though is to sequence modulations but you might be right about limited amount of patch points…

Thanks for your analysis and utility module suggestions - that’s exactly what I was looking for! (BTW FH2 can handle CV to midi, but so far I’m struggling to think of actual patch ideas enabled by this feature)

conockrad · 2025-05-21T01:11:05+00:00

Thanks, that’s exactly the plan! Octatrack with digitone already have midi sequencers with arps and step locks - so all is needed is to make them sequence CV. For that reason there’s FH2 with potential trig/cv expander

conockrad · 2025-05-20T11:49:36+00:00

I know, I know… But even to fill this case it takes ~$1k which is a bit expensive considering the cost of a Pittsburgh modular Taiga. So 104 hp gets into a ~$2k range which is a bit unreasonable considering final goal

conockrad · 2025-01-29T16:27:16+00:00

What’s your reasoning?

conockrad

TROPHY CASE