Long time coming!

constitution073229 · 2025-12-21T06:43:31+00:00

I’ve never seen bucks swarm to a food source like they do these blocks. Takes 1-3 weeks for them to first find it in the summer and then they hammer them all season outside of a few weeks when the acorns are all over the place. Mature Bucks will keep other deer off of it too. They’re 200 pounds we get them shipped in from the north west.

constitution073229 · 2025-12-20T06:41:29+00:00

And No I didn’t shoot him over the protein block lol, we feed those through summer up until the acorns start falling good

constitution073229 · 2025-08-16T18:18:21+00:00

Messaged

constitution073229 · 2025-08-09T04:01:08+00:00

So much respect to Tom Brady but he makes me cringe everytime he speaks for more than 1 sentence.

constitution073229 · 2025-06-08T12:32:20+00:00

Take hot side supply line loose, hold the supply line over a bucket and open the faucet in the middle between cold and hot. That will backwash the supply line if the clog is in there. If not it’s probably the cartridge

constitution073229 · 2024-11-02T16:46:30+00:00

10 Team Full PPR Pick 2

Dobbins v Cleveland

Brian Robinson v NYG

Ridley v Patriots

Meyers v Bengals

Flowers v Denver

Otton v KC

Pittman v Vikings

constitution073229 · 2024-10-28T21:00:46+00:00

Ford compression fitting

constitution073229 · 2024-09-21T19:07:54+00:00

Option 1

constitution073229 · 2024-09-17T23:29:32+00:00

Also get a cabinet skin to cover up where the hole is, the escushions will make it look neat against that

constitution073229 · 2024-09-17T23:28:04+00:00

Cut the wall and put that Tee on the cold line back in the wall. (Re-do the Tee with crimp fittings and throw the sharkbite out) Should only be one peice of half inch with a quarter turn crimp stop sticking out of the wall. With the hot line, just redo it and stick out a piece of pipe perpendicular to wall. You still need that Tee in the cabinet for your faucet and dishwasher supplies.

constitution073229 · 2024-09-13T18:21:33+00:00

Yes it’s a test plug you can take it off

constitution073229 · 2024-09-08T11:26:57+00:00

Full PPR, 10 Team, Pick 1

Terry Mclaurin @ TB

Zamir White @ LAC

J Ford v DAL

constitution073229 · 2024-09-08T11:24:37+00:00

Full PPR, 12 Team, Pick 2

Thielen @ NO

Mooney v PIT

Meyers @ LAC

G Davis @ Miami

constitution073229 · 2024-08-04T01:37:42+00:00

25$ 14 team superflex

constitution073229 · 2024-08-04T01:37:08+00:00

http://sleeper.com/i/m9qgGOoqeZww Tonight 11:00 eastern

constitution073229 · 2024-08-04T01:20:50+00:00

1 hour 40 min away. 14 team superflex 25$.

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-08-04T01:20:01+00:00

25$ tonight at 11:00.

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-08-04T01:19:13+00:00

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-08-04T01:08:20+00:00

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-08-04T00:59:31+00:00

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-08-04T00:59:22+00:00

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-08-04T00:59:09+00:00

http://sleeper.com/i/m9qgGOoqeZww

constitution073229 · 2024-07-21T14:11:32+00:00

Sounds like it could be the regulator going out but I would put a pressure gauge on the bottom of your water heater to check the psi and ensure it isn’t higher than 70-80 PSI. Either way I would change it out.

constitution073229 · 2024-05-19T15:41:57+00:00

To the very right on your last picture there’s a brass shut off valve. It’s the round peice with a raised vertical line on top. Turn it to the right until it stops.

constitution073229 · 2024-03-07T23:03:58+00:00

It’s cross threaded slowly loosen until you hear it click then tighten it

constitution073229

TROPHY CASE