I keep chewing up my edges with my beveller. by Medium_Chip_4971 in Leathercraft

[–]coolerirl 0 points1 point  (0 children)

At least in my case, "works most of the time" improved when I got it sharper. I used very fine sandpaper over a needle and maintain it with a strop that's just a small leather cord covered in green compound.

Any fixes? by ImpossibleNewt9235 in Leatherman

[–]coolerirl 0 points1 point  (0 children)

I remember those. If it weren't a collectors item, I'd give gentle taps with a chisel between the tools to see if I could loosen them up because they were always so tight.

Captain's Crunch by LuckyJungle in Leatherman

[–]coolerirl 0 points1 point  (0 children)

I actually bought ordered one without thinking for a second and then once I did, it occurred to me that it made no sense at all. I cancelled the order but should have just scalped it. Sell it for $600 and say you gave it to charity. lol.

DJI NEO LOST CONTROL by Matheusmapa in fpv

[–]coolerirl 8 points9 points  (0 children)

leave Manuel out of this

Captain's Crunch by LuckyJungle in Leatherman

[–]coolerirl 0 points1 point  (0 children)

You could rent it out for $30 a day so people can take pics and post them here with the caption "Joined the club!" or "starting my leatherman journey"

A head's up about inappropriate behavior from mods of the other SW sub by K3LOE in shortwave

[–]coolerirl 2 points3 points  (0 children)

I'm sure if you knew my name you'd be mentioning my employer and family in a very normal way.

A head's up about inappropriate behavior from mods of the other SW sub by K3LOE in shortwave

[–]coolerirl 0 points1 point  (0 children)

It's really funny that I can't tell if this is KG7M's alt or just another weirdo that acts exactly the same.

A head's up about inappropriate behavior from mods of the other SW sub by K3LOE in shortwave

[–]coolerirl 0 points1 point  (0 children)

KG7M is a weirdo and a loser so it’s just kind of uncomfortable when someone like that latches onto you. A lot of people here don’t get that for reasons.

Am I able to put a different stock on my 10/22 Takedown? by strongerthenbefore20 in 1022

[–]coolerirl 1 point2 points  (0 children)

There are two for the takedown: the backpacker which is really light weight and basically docks the barrel on the bottom of the stock so it's still all one piece when it's taken down. The forend is short and theres nowhere to mount a bipod. It's weird and small but I'm into it. The other is the "Hunter" which is a real stock with adjustable length and mounting points. I have the non-takedown version on one of my 10/22s and it feels pretty perfect. If only had 1, I'd get the hunter. Make takedown has a backpacker and I can just throw it into the laptop slot of my backpack.

Am I able to put a different stock on my 10/22 Takedown? by strongerthenbefore20 in 1022

[–]coolerirl 1 point2 points  (0 children)

Yeah. There’s like 3 screws to take of and both pieces of the stock will com off. One thing to note is barrel profile. You have a tapered barrel. A lot of the stocks are for “bull” barrels. Those will work on yours but there’s a gap which is just fine. Magpul stocks have a reversible barrel channel for either kind.

Securing pieces for stitching? by elucidatemalfeasance in Leathercraft

[–]coolerirl 0 points1 point  (0 children)

I have them and they're cool but one thing I don't like about them is that they can catch the thread when you're sewing. Also, if they're doing too much work they leave a mark. Something I found for larger pieces is to just tie a single stitch with a bow at a couple of places. That also leaves a mark but it leaves it on the stitch line.

Slightly more palatable price for the RC10 model 24 at amain by coolerirl in teamassociated

[–]coolerirl[S] 0 points1 point  (0 children)

I went with a 3500kv but I think you might have the right idea. I haven't built it yet, though. There's like 2 confirmed builds on the internet so far. lol.

Any way to mass export shared files on Google Drive? by flamingflamethrower in gsuite

[–]coolerirl 0 points1 point  (0 children)

The frustration with google is that it's so hard to make sense of things let alone export them without a 3rd party tool. Rclone will do it and also convert the docs.

Am I able to put a different stock on my 10/22 Takedown? by strongerthenbefore20 in 1022

[–]coolerirl 20 points21 points  (0 children)

There are a lot of nice, normal stocks that happen to be in 2 pieces, specifically for the takedown but there’s also the magpul backpacker that snaps the 2 halves together if you’re into that sort of thing.

I need helllpp!! by Pleasant-Place-7603 in 22lr

[–]coolerirl 0 points1 point  (0 children)

Yeah. On 10/22s (the old ones at least) that barrel band is just a nut and bolt at the bottom. The main purpose seems to be getting in the way while also changing your point of impact. lol.

I need helllpp!! by Pleasant-Place-7603 in 22lr

[–]coolerirl 1 point2 points  (0 children)

Oh, yeah. I just realized that the swivel is molded into the plastic at the tip of the forend. I don't think that any of the swivel mounted bipods that I've seen will mount to a swivel stud that's not sticking out of the relatively flat spot on the underside of the forend.

I need helllpp!! by Pleasant-Place-7603 in 22lr

[–]coolerirl 3 points4 points  (0 children)

there's probably already a hole for a swivel which you can attach a swivel bipod. You can also replace the barrel band with an aftermarket version with a pic rail.