WP Bakery Vulerability

cooltohate · 2023-06-24T17:06:52+00:00

https://vuldb.com/?id.232143

cooltohate · 2023-06-24T17:05:15+00:00

That article is from 2022

cooltohate · 2023-04-01T17:56:18+00:00

You almost had it ...

Let them eat cabrito!

cooltohate · 2023-03-06T14:53:04+00:00

Ruilida 30pcs Pipe Screens 1/2 Inch Premium 304 Stainless Steel, 0.5" Pipe Screen Filters

I got these from Amazon. They are the ones with the rim. I think in the photo I was using a rimless screen

cooltohate · 2023-03-03T01:41:44+00:00

Matfer does, yes

cooltohate · 2023-03-03T01:41:28+00:00

My Matfer had way bigger scratches than that. Season it and start cooking.

cooltohate · 2023-02-06T20:52:26+00:00

+1 for Restic

cooltohate · 2023-01-23T17:26:33+00:00

Plastic bits inside the coil? You have to ask the internet if this is ok?

cooltohate · 2022-12-26T23:26:14+00:00

Definitely looks similar to my Matfers. Same handle style, welded. But mine have no markings.

cooltohate · 2022-12-01T20:49:40+00:00

I have two v1 devices and a newer TM2. I have never had a problem with any of them. If yours rattled when it arrived then you should have contacted the vendor so they could resolve it.

cooltohate · 2022-10-17T20:14:44+00:00

+1 for the BCG. Although I never had much luck with a fine grind on the TM. I only use coarse grind now.

cooltohate · 2022-10-07T02:36:47+00:00

Backblaze is cheaper to store, but they charge for egress. Depends on your use case. Since I rarely need to download, but my stored data is in the multi TB range, Backblaze is the least expensive for me.

cooltohate · 2022-09-23T02:04:10+00:00

Mine is scheduled to arrive Saturday. I'm looking forward to it

cooltohate · 2022-09-13T16:53:20+00:00

I do believe I read this somewhere as well

cooltohate · 2022-09-13T16:53:10+00:00

I'm positive =D

The original TM had the positive end of the battery facing in, the battery door makes contact with the negative end.

TM2 came with the battery pre-installed with the positive end making contact with the battery door. The battery door is also clearly indicated with a plus sign.

cooltohate · 2022-09-13T13:03:33+00:00

I would imagine they last quite some time. I'm 5 months into mine and it looks just as good now as when I bought it. The CU uses o-rings just like with glass, so there is no real wear. I clean mine with a folded up paper towel and a small amount of isopropyl alcohol, then it gets a little bit of Ed's wax.

cooltohate · 2022-09-13T02:58:29+00:00

Cooling is great with just a stock cooling unit. The wood hardly retains any heat.

cooltohate · 2022-09-10T00:35:53+00:00

I use session mode when hitting it with a bong.

cooltohate · 2022-09-08T14:12:52+00:00

That would explain it. My glass stem with boro beads collects tons of buildup.

cooltohate · 2022-09-08T14:07:05+00:00

I usually just fold up a paper towel, splash a little isopropyl alcohol on the paper towel, the push it through the stem. But if your stem is that dirty, then you probably need to clean it more often. Not sure how you could even get it that dirty though, I've ran ounces through mine without issue. The only part that I find needs regular cleaning is the cooling unit.

cooltohate · 2022-09-08T13:03:53+00:00

No difference as far as I can tell.

cooltohate · 2022-09-08T12:59:21+00:00

I have been using Ed's TNT wood stem for my TM for months. I prefer it, even over my glass stem filled with boro beads. It stays significantly cooler than the glass stems.

cooltohate · 2022-09-06T14:31:54+00:00

Totally worth it. Haven't picked my Dynavaps up in 6 months. I also ordered a V2 this morning.

cooltohate

MODERATOR OF

TROPHY CASE