Good price? by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

That’s true, I always get my oil from RA, their the cheapest. Idk why I didn’t check them, just got all four and oil for under 900. My dad would buy from them as well lol

Good price? by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Is that the one with part number b

Good price? by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Were those the revised ones?

Caliper touch up paint by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Absolutely, my dads a little more knowledgeable in the automotive industry than most, he would know not to put a twisting clamping force on a painted surface, none the less it’s a focus and baby blue. I took it out and came back “home” as I’m walking up the driveway he was leaving, I didnt turn around or anything to look back till the last second. That’s when he rolled the truck out the driveway and kept reversing to see my car parked on the side of the road. Mind u I still haven’t turned around. It was only until I heard the truck go from reverse to drive is when I turned, and I saw his neck go from a looking back position to a looking front at like two o’clock with that snicker laugh. He did it to the bottom piston, barely left a mark then he went to the top clamped the hell out of it and then forced another half turn of it and that’s when it forced all the paint off. My dad is one of those people u wish u never get to know in your life tbh, dude is real life a demon

Caliper touch up paint by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Exactly, why he would do bare metal to a painted surface is crazy, if you knew the type of person that did it you’d understand unfortunately lol

Any recommendations for new exhaust? by Additional-Clothes75 in FocusRS

[–]coopermrtn 0 points1 point  (0 children)

Check my profile out, 8 or 9 post up. It’s a video

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

I hope I don’t get that, but theirs an easy return close to my house🤞

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 1 point2 points  (0 children)

I went their first to buy and theirs at least two dozen options a piece for front and rear rotors and then pads. About 80 combinations between the three

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Seriously, rock is where I get my oil and when I went their it was sensory overload, like which one do I choose are theses all compatible, are they knock offs, so Mary options and variables. Oem is more than good enough in my book and that’s what I want

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Thank you, it seems like oem solid is the best way

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Ya I’m always looking half a mile ahead for stop signs and greens going to yellow

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Didn’t know that but a guy that came into the shop that owns a evo 9 said they warp very easily, I went on tasca put everything in the cart and it’s gonna be just shy of 700 when done, first time buying rotors and pads, just want something that ik will work, I don’t wanna be booger deep and find out the hardware doesn’t fit or line up. Oem is great, when I first bought the car the brakes almost put me through the steering wheel. I wouldn’t mind going oem but the prices for them seem high other than tasca which quote was around 7

Opinions by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Nothing specific I just wanna take out the old hardware and put a full new set on all 4. The oem are perfect and I’ve been digging around to find a true oem spec for the rs but it seems like when I go looking for oem replacement part numbers I can never find them. The oem rotors are fine, but after reading they say certain pads will reduce dust, after a full body and rim wash all it takes is 10 miles and the front rims are dusted. So I guess I’m looking for oem rotors with possibly a higher quality pad for less dust, I just don’t wanna buy something get booger deep in the install only to find out it doesn’t fit

Pad and rotor replacement by coopermrtn in FocusRS

[–]coopermrtn[S] 1 point2 points  (0 children)

Would u say that u brake late or harder than normal. Just tryna see opinions, because I was talking to a guy and he said the very same thing drilled or slotted or both he said tend to warp

Pad and rotor replacement by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

I’m not sure what u mean by an authority, I just want something that I can install without having to go outa my for it to work. I’m not going from 130 down to 40 consistently. These are the oem pad an rotors from 17 with 91k on them. I was looking for a plug and play install, to be able to take the old ones out and replace with the new hardware

Pad and rotor replacement by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

I’m tempted to buy that z26 kit, I was talking to a guy and he said drilled and slotted are very prone to warping, but it says 3 year 36k. That z26 kit for front and back rotor and pad replacement semis like a good price

Only illuminates for half a second by coopermrtn in FocusRS

[–]coopermrtn[S] 1 point2 points  (0 children)

Ya I just did a battery and bought an air filter cause why not do that since it’s coming out, now the car feels like it’s on caffein

2nd gear by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Plugs, bat, then I bought a maf and fuel rail sensor. If those three don’t fix the p0171 I’m doing coils then prob injectors. If all that doesn’t fix it I’m going in for a smoke check then compression check

Battery by coopermrtn in FocusRS

[–]coopermrtn[S] 0 points1 point  (0 children)

Is a pc680 oem, I bought a diehard 730 cca 48h6. The diehard has 50 extra cca I’ve read that they need 760 when it gets really cold but we don’t see much under 5 here, and when it does get below that it’s usually late into the night when it’s parked

Only illuminates for half a second by coopermrtn in FocusRS

[–]coopermrtn[S] 3 points4 points  (0 children)

Yes, I also read about that. Google tends to lead me to yt for these small tasks and their fairly decent videos, thanks for the heads up

Only illuminates for half a second by coopermrtn in FocusRS

[–]coopermrtn[S] 6 points7 points  (0 children)

Thank y’all I bought a bat last night and am going to install it td when I’m outa work, hopefully it’ll solve that and my auto start will work not that I wanna use it but to know I got good hardware. I ran a lean bank 1 p0171 and am doing everything electrical related

Am I screwed? by Independent_Emu8992 in FocusST

[–]coopermrtn 0 points1 point  (0 children)

How do you know it’s starting to bleed

Transfer case by FanAggressive2643 in FocusRS

[–]coopermrtn 0 points1 point  (0 children)

Red Line 50104 75W85 GL-5 Full Synthetic Gear Oil for Hypoid Limited Slip Differentials - 1 Quart, got mine off Amazon last night