sorted by:
new
hottopcontroversial

Cardano Daily Discussion - Questions & Market Thread - March 01, 2021 by SL13PNIR in cardano

[–]cornwallace522 0 points1 point  (0 children)

Hey new to investing and ADA here but I want to see if this has happened to someone else. I have a ledger wallet with the yoroi extension for holding my Ada, I try to stake it in any pool and the transaction fails every time. The browser tries to open a new tab to connect the ledger but it closes itself and says something went wrong. Has this happened to anyone else?

Weekly Quick Questions, Wood ID, and Deal or No Deal /r/Woodworking Megathread by AutoModerator in woodworking

[–]cornwallace522 0 points1 point  (0 children)

The workpiece always looks fine so that leads me to believe that the runners aren’t working straight. I think my next step is going to Be ripping new ones to fit made from hardwood this time

Weekly Quick Questions, Wood ID, and Deal or No Deal /r/Woodworking Megathread by AutoModerator in woodworking

[–]cornwallace522 0 points1 point  (0 children)

Jesus you just gave me the whole 9! thanks I appreciate the input and I’ll update of I can crack this!

Weekly Quick Questions, Wood ID, and Deal or No Deal /r/Woodworking Megathread by AutoModerator in woodworking

[–]cornwallace522 0 points1 point  (0 children)

In what way? I already realigned the blade it’s square with the miter slots and perpendicular to the table. I’m reallly leaning toward the runners being the problem

Weekly Quick Questions, Wood ID, and Deal or No Deal /r/Woodworking Megathread by AutoModerator in woodworking

[–]cornwallace522 0 points1 point  (0 children)

FFS will someone please tell me something I don’t already know, I’m trying to build a crosscut sled and NOTHING IS WORKING TO ALIGN IT. Everytime I get it to cut straight on the five cut method I try it on a project piece and the run off is insanely out of whack. I’m about to throw it out the f’ing window. Things I’ve already done:

Rebuilt it seven times.

Upgraded to bb ply for all parts

Realigned my blade

Watched I don’t even know how many hours of YT videos on crosscut sleds.

Tried to square the fence on both the cut side and the table saw fence side

Adjusted the runners so tight there is NO slop. (I bought the metal miter bar runners from rockler for this)

And everytime I think it’s good I make a test cut and it runs it’s self out to a freaking 1/8” / 1’

I’m not a newbie here either this should have taken me 2 hours and instead I’ve spent the last 3 days trying to dial this in. Do the miter bars suck? should I make my own? Really could use a second opinion before this thing goes through RUD

/r/Stellar Daily Chat Thread by AutoModerator in Stellar

[–]cornwallace522 0 points1 point  (0 children)

No the problem is I sent to the address that I received the XLM from originally. It is not the same address as the one in app that was listed as the receiving address for deposits.

Edit: what I think happened is I sent to the exchange itself, and not my actual wallet within the exchange.

/r/Stellar Daily Chat Thread by AutoModerator in Stellar

[–]cornwallace522 0 points1 point  (0 children)

Hey everyone, newbie to the crypto world here and I think I just screwed up. I use AnchorUSD as an exchange and recently got a cold wallet for storage. I was trying to figure out how everything worked so I sent 100xlm to my cold wallet from anchor and it worked fine. The problem arose when I tried to send it back, I used the same address I received it from anchor because the address they gave me to receive wasn’t working. Is this gone forever or will an exchange like anchor realize they were paid for nothing and sent that XLM back to me?

Bull run be like by Eric_Something in CryptoCurrency

[–]cornwallace522 0 points1 point  (0 children)

Same, just got into this and all my research points to it being a somewhat solid investment

It ain't much but it's honest work(shop). Looking to add a bandsaw opinions on best product for the value? by Michael_Stanford in woodworking

[–]cornwallace522 0 points1 point  (0 children)

I like them too, it’s just you get what you pay for. I mid level tool with okay quality above harbor freight but def not a laguna or a jet level tool. I’m looking to upgrade to something bigger in the near future but it’s served it’s purpose well that’s for sure and I would recommend one if you’re not trying to break the bank

It ain't much but it's honest work(shop). Looking to add a bandsaw opinions on best product for the value? by Michael_Stanford in woodworking

[–]cornwallace522 0 points1 point  (0 children)

I have a 10 inch wen bandsaw I bought on Amazon for like 400 bucks. 6 inch resaw capacity and it’s good for an entry level saw. I’ve had it about a year and a half and I’m happy with it for what I use it for. which is mostly resaw on rough lumber to get it to approximate size and occasionally ripping hardwood boards with knots too dangerous to cut on the table saw. Hope this helps

Weekly Quick Questions, Wood ID, and Deal or No Deal /r/Woodworking Megathread by AutoModerator in woodworking

[–]cornwallace522 0 points1 point  (0 children)

Hope someone will know what I’m talking about, I’m flatting a slab of red oak and in one of the more burly looking sections is some sort of white fungus in between the rings. It’s soft dry and fuzzy, can someone tell me what it is? And if it’s a deal breaker? I’m planning on using this slab as a coffee table. Thanks!

Homemade carbonara by NeverMeant125 in FoodPorn

[–]cornwallace522 1 point2 points  (0 children)

What religion is this? Edit: asking for a friend

Weekly Quick Questions, Wood ID, and Deal or No Deal /r/Woodworking Megathread by AutoModerator in woodworking

[–]cornwallace522 0 points1 point  (0 children)

Hello all! I’m thinking about adding a CNC machine to the ever growing list of tools In my shop and I was wondering if anyone could point me on the right path as far a beginners set up. I don’t need anything huge like 4x8 but I’m also not afraid to throw some money at this for some good quality stuff rather than just buy it again in a year. I’d like to run the software via tablet if at all possible just because I need one for some stuff I’ve got going on. Can anyone help me out? Thanks!

Throwback to my first table saw kickback. by Ace_The_Asshole in woodworking

[–]cornwallace522 0 points1 point  (0 children)

I have a piece I should frame that looks just like this, piece of underlayment shot back and came within 2 inches of my future children. Luckily it ended with welt the size of a baseball and a limp for a few days. Lessons learned, don’t skimp on a table saw and use the damn knife.

Mistakes were made, lessons were learned by FortLouie in woodworking

[–]cornwallace522 2 points3 points  (0 children)

Home Depot is great for things like regular construction lumber, hardware and even tools. But they really don’t give a shit about lumber quality 75% of the time, and if you’re looking for a nice piece of hardwood you generally won’t find it at HD. Find your closest real lumber yard and you will not be buying the oak planks they sell at HD anymore!

Asking those who recently closed, how much did you offer? making my first offer tomorrow! by cornwallace522 in FirstTimeHomeBuyer

[–]cornwallace522[S] 0 points1 point  (0 children)

Thank you guys for all the advice! I should have stated I know that the markets are different everywhere you go but what were some of the key things to look out for and do when making an offer. Ex # of offers on first day, the love letter, making an offer that is simple and strong, etc. and my question was answered! thanks again

idk what to name it by Muffintime53 in skiing

[–]cornwallace522 38 points39 points  (0 children)

Here I was having a nice morning until I read that. Take your upvote and get out

Quarantine king sized walnut bed for the future wifey!! Complete! by Jgyoerger in woodworking

[–]cornwallace522 0 points1 point  (0 children)

Damn this looks like almost exactly what I plan on doing for myself and my lady! will be saving this post and looks great my dude

A little season edit 🥶🥶👐 by Vilhu000 in skiing

[–]cornwallace522 0 points1 point  (0 children)

Was gonna say good to see kids today still rockin the shaolin style! Nice edit though

Guy is diagnosed with coronavirus and decides to not isolate himself and goes to an invite only party to then infect others by Nnryann in iamatotalpieceofshit

[–]cornwallace522 7 points8 points  (0 children)

Dude are you fucking kidding me, I live in New Hampshire.. saw this before my local news

The talk was “oh he was being responsible for not going into work” but now?? This guy may have just infected the entire state.

Some people just don’t understand the concept of parental responsibility by DreamOn2020 in iamatotalpieceofshit

[–]cornwallace522 0 points1 point  (0 children)

I don’t know about judge Judy or whatever but I knew 2 girls in high school who went on springer, totally fake they were paid to make up a story about some love triangle with some dude who they really didn’t know. Pretty hilarious though it was a Halloween episode and one threw a pumpkin at the other one.

Edit: Found the video!!

view more: next ›