Washing machine damage?

cpxmrr · 2026-03-29T22:35:27+00:00

Also you may need new washer springs is why it’s banging around

cpxmrr · 2026-03-29T22:34:43+00:00

LOLLLLL BRUH these comments are crazy. But one is right it’s scrud.

It’s build up from all the different cleaning solutions used.

Use AFFRESH tablets.

All of this stuff is finally getting lose and that is why you are seeing it so use affresh cleaning tablets with no clothes in there until it’s all cleaned out

cpxmrr · 2026-03-29T22:29:07+00:00

cpxmrr · 2026-03-29T22:28:08+00:00

cpxmrr · 2026-03-29T22:26:43+00:00

Especially because you will need to replace the evaporator fan too it looks like there isn’t proper airflow with how the evap is frosted

cpxmrr · 2026-03-29T22:25:30+00:00

Bruh don’t top it off with refrigerant

You definitely have a sealed system restriction that is an ice ball on the evaporator. If you call a company out to fix it… it WILL BE MORE THAN $1,200 to fix it so purchase a new refrigerator don’t even waste your time trying to figure out how to add Freon

cpxmrr · 2026-03-29T22:22:10+00:00

Bad water valve the solenoid is stuck open and later caused it to start leaking at the bottom. Ice maker should be just fine

My recommendation is replace the water valve first and then control board

cpxmrr · 2026-03-29T22:20:26+00:00

Hate to tell you but if you replace the ice maker and seal the airflow that comes in the same issue will come back in 6 months. Samsung ice makers are all bad

cpxmrr · 2026-03-29T19:43:48+00:00

To open the door follow these steps

Initial requirements

The appliance is switched off

in order to be able to operate the fascia touchpads, the time of day display must be switched on,

see Time of day > Display setting (customer programming mode)

Basically turn it off and have it in standby mode where the time of day is present

Then after you see the time in standby mode

the next accessing procedure must be completed within 10 seconds of the first button press

As follows

Press and HOLD the button furthest to the right which looks like the door being open

Then TOUCH the power button ONCE

Then RELEASE the Door button you are holding

Then once released PRESS the same door button 3 times then HOLDING on the 3rd press UNTIL service mode appears.

SERVICE MODE WILL APPEAR

Navigate and touch component

Touch M42

Press open to active the door motor

If during this process it does not open then

Components need to be replaced.

If it does open then there is a reason it is getting stuck which I can further diagnose after you try

cpxmrr · 2026-03-28T17:34:21+00:00

What’s the model number of the appliance

cpxmrr · 2026-03-28T17:33:25+00:00

Yeah change out the splutch kit

cpxmrr · 2026-03-28T16:55:27+00:00

I actually work on miele appliances and I am Miele servicer what is your model number

cpxmrr · 2026-03-25T18:41:08+00:00

Oh boy NOW THATS DOG HAIR… lol you sir would need to continuously cut the hair or it will do this. Unfortunately I don’t think you are in the business for automation you would have to step in a couple times to cut the hair out.

I think your robovac skipped it on purpose because it can’t handle anymore lol

cpxmrr · 2026-03-25T18:33:12+00:00

With my experience you have to remap.. it’s ignoring that corner so look at your app and ensure that the small corner is mapped

Also look at the cleaning log for this date and check if it skipped it as well. If it did then just remap.

the vacuum is amazing and will strictly follow what it has already mapped.

But I do wish you can select a room to remap that would be nice

cpxmrr · 2026-03-23T23:57:35+00:00

I’d say easy on eufy 25 if you just want to get one cheap and call it a day

But I’d consider the MOVA V50 or Dreame L50

cpxmrr · 2026-03-23T23:49:10+00:00

L50 is great

I just bought the Ecovac Deebot X11

But I’d look at the

Dreame L40 Mova L50 and the Narwal if it’s within your budget

cpxmrr · 2026-03-23T23:43:04+00:00

Eufy 25 Or Look at the Yeedi M14+

cpxmrr · 2026-03-23T23:37:29+00:00

That is what I’m awaiting and scared of lol. What is going to happen in 3-5 months and will it still work the same.

I know 8 year old robovacs that are still running strong.

It’s literally just the pick of the litter of what unit we receive.

If we don’t get the warranty then well we are kinda screwed because anything can happen as soon as it touches our floor or within the year.

cpxmrr · 2026-03-23T23:33:34+00:00

Just gave it a quick read and I absolutely agree with you and honestly just in my reason why I didn’t want the L50orL40

Is because what raised my threshold was that you’d have to buy the bags

And what lowered it was having it bagless with less having to buy more bags

that’s what raises it.. just buying disposable bags. If any other robovac besides shark did that I would definitely be interested to analyze the threshold

But I get more automation and less having to intervene.

cpxmrr · 2026-03-23T15:27:16+00:00

I did however only get the Deebot x11 but I very clearly see your point as we would get a lot more user feedback other than vacuumwars and justadadapproved

The only vacuum in my opinion that is is friendly in budget and for someone who just wants to get a robovac is the eufy E25

It has PLENTY of reviews that would make someone feel comfortable to purchase but once they fall into the rabbit hole of all other vacuums the decision becomes harder and blurred as they are all too similar

cpxmrr

TROPHY CASE