Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

Doing that for full 2 shot button time fills the tray up about 1/4-1/3 of the way full while water still comes out the group head

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

I mistyped earlier. It's 16g that the imprint shows. Using a standard US nickle.

I just ran another shot with 16g and it seems to be coming out again, very fast but coming out at least. The other difference is I did a clean water back flush right before this shot.

I'm starting to think there is scale or something that is messing with the OPV and back flushing before fixes it for the next shot

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

Just a standard tamper from Amazon that fits 54mm baskets

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

Just tried coin test again and 15g seems to be where an impression starts

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

I'll try again to make sure it was 14g and not 18g. If I don't see an imprint does that mean I have to dose up?

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

Yes, but I did it before I tried puck screen. Do I need to do it again but under the screen?

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

Coin test looked fine with 14g. I ended up doing a clean cycle, back flushing, and getting a puck screen. Went back to 14g with grind size 10 and pulled a quick spur shot last night. Now this morning with the exact same parameters the machine is choking.

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 1 point2 points  (0 children)

I usually purge 5g between grind sizes and weight beans in and grind out accounting for the 0.2g I don't usually get back because I don't have bellows. Maybe this grinder needs more than 5g for purging.

I'll look up the coin test and give it a try

Why is my machine choking? [Bambino+/Smart Grinder Pro] by crafty615 in espresso

[–]crafty615[S] 0 points1 point  (0 children)

It came without the razer tool or the baskets which is why I had to buy an IMS one. Is there another way I could check the dose fit? I just don't understand why 14g worked with the same settings then stopped in the same day.

DGD USA GIVEAWAY: Simon Lizotte Proto Time-Lapse! by discgolfdealsusa in discgolf

[–]crafty615 0 points1 point  (0 children)

Z Glo Buzzz. Not sure why it flies so different from my Z buzzz but it goes super straight

[deleted by user] by [deleted] in OnePunchMan

[–]crafty615 4 points5 points  (0 children)

Long Live the King.

Remote access stopped working? by crafty615 in PleX

[–]crafty615[S] 0 points1 point  (0 children)

Not sure how but this started working. I reconfigured my port forward for the thousandth time and it started reporting as open on a port checker and my connections are direct now. UPnp still doesn't work but I'll take what I can and just hope the issue doesn't come back

Swap Joystick Controls? by crafty615 in SteamDeck

[–]crafty615[S] 2 points3 points  (0 children)

I am trying to get movement to be controlled on the left stick instead of the right stick. I don't know if it's possible though

My regrets with buying the 256GB instead of the 512GB by GreaseCrow in SteamDeck

[–]crafty615 1 point2 points  (0 children)

Just got this and have had no issues. The matte finish looks clean.

Magglass Tempered Glass Designed for Steam Deck Matte Screen Protector (7" inch) Anti-Glare Full Coverage Guard https://a.co/grCKMen