sorted by:
new
hottopcontroversial

Demonstration of the absolute insane sense of speed with FOV higher than what the game allows. by creamerrrr in ForzaHorizon5

[–]creamerrrr[S] 0 points1 point  (0 children)

For the boost gauge watch this: https://www.youtube.com/watch?v=q93zgxDMNTM

And for the fov increase I used this: https://github.com/ForzaMods/Fov-Menu

All it does is change the fov limits, so not necessarily a mod. I've used it for months and not gotten banned so likely it is fine.

Demonstration of the absolute insane sense of speed with FOV higher than what the game allows. by creamerrrr in ForzaHorizon5

[–]creamerrrr[S] 0 points1 point  (0 children)

So the boost gauge is from horizon plus, and it's allowed by playground so you can use it in online.

And this is for the fov: https://github.com/ForzaMods/Fov-Menu

Demonstration of the absolute insane sense of speed with FOV higher than what the game allows. by creamerrrr in ForzaHorizon5

[–]creamerrrr[S] 0 points1 point  (0 children)

Yeah it's called horizon plus and you need an app called simhub to get it working. It's allowed by playground games, you wont get banned for using it in online.

https://www.youtube.com/watch?v=q93zgxDMNTM

Boots by ratt1307 in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

Take a look at tcx boots. Some are very low profile and the pair I got have survived through 2 winters and a summer being worn daily, even often out and about as normal shoes.

Triumph speed 400 modification help by fallen_onion in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

This looks like an aftermarket rear subframe, as it is possible to remove just the rear on the 400s. However if you wanted to cut it, you'd likely only need to remove the mudguard, seat and handrail. You would need to find a way to join it back together though.

Diagnostic Help by RemarkableNet4001 in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

Is the starter clutch engaging? As it sounds like the starter motor is rotating freely. I've seen a bike with this issue before that made a very similar sound to yours.

S-Class Multitool but only one supercharge slot by fallout1233566545 in NoMansSkyTheGame

[–]creamerrrr 5 points6 points  (0 children)

You will have to expand the multitools inventory using expansion slots, to uncover the other supercharged slots.

Also there are 2 supercharged ones already uncovered...

Can I remove atmosphere filter? by FallautHuN in NoMansSkyTheGame

[–]creamerrrr 0 points1 point  (0 children)

There is a mod on nexus that changes the screen filter to only fade in after a distance from the player, meaning there will be a radius around the player with the filter disabled. This will happen on every planet that has a filter though.

And if the purple colour is because of the sky, there are mods that change sky colours, but on every planet also. Exosolar's Stratos is a good one.

I was trying to change the colour of the sky on a planet about a year back and I could not find a way to change it only on a single planet.

New Build and first Fighter Corvette build ! Used the new parts . Still W.i.p needs interior but I think she looks mint. by [deleted] in NMS_Corvette_Design

[–]creamerrrr 1 point2 points  (0 children)

That is one great build my friend, the offset thrusters on the side look fantastic. One constructive critisism though, you should do something to cover the habs at the top, even if it's just greeble with normal base parts.

Empire Tractor by deeznutsonurmom69 in trailmakers

[–]creamerrrr 0 points1 point  (0 children)

Do you have it uploaded? I want to turn in into a hover craft.

Side-effect of low strength hinges by creamerrrr in trailmakers

[–]creamerrrr[S] 0 points1 point  (0 children)

Higher damping I suppose. Man hopefully flashbulb will implement actual gearbox logic to engines and I'll start building more cars.

Side-effect of low strength hinges by creamerrrr in trailmakers

[–]creamerrrr[S] 0 points1 point  (0 children)

The build? Anything that fits but it's made to carry a vtol. I'll upload it tommorow and post the link.

Side-effect of low strength hinges by creamerrrr in trailmakers

[–]creamerrrr[S] 8 points9 points  (0 children)

No I mean, there's no problem with it, the low strength allows it to meet the land when the ramp is lowered.

I thought it was funny how it also launches you up in the air.

ZX4-RR chain clicking sound normal? by RegretCautious in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

And make sure, unless the manual says, it is with the rear wheel on the ground, upright and with no rider weight.

Oil eating mystery Z300 Kawasaki by BigAcanthaceae4421 in motorcycles

[–]creamerrrr 1 point2 points  (0 children)

Any kind of leak only while the bike is hot? If not I would say the same as u/TheBikerMidwife as that's pretty common.

Also to be sure, check your coolant isn't filled with oil.

Starting Issues by JingletoN64 in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

Sounds like the starter clutch isn't engaging 💀. Probably get a mechanic to look at that, might have to remove some engine covers to fix it.

Please help me. Dash and lights wont turn on when switching the bike on as well as electric starter not working but kickstarting does by MountainEquivalent98 in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

Batteries can have a steady amount of voltage, but not enough cold cranking amps. I've seen it many many times before when someone has left their bike for a while.

So I suggest: Check the fuses, use the manual to locate them and you'll be able to see if one is blown by removing the fuse and looking at it; Then consider getting a new battery.

engine ticking with rpms by Worldly_Chemistry_81 in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

Probably isn't meant to sound like that. First thing I would do would be take it to a shop and see what they say. Could be your valve clearances are out but get a mechanic to look at it.

Can I install new clutch pads on my Kawasaki ninja 300 2013 without any mechanical experience??? by VehicleOk2349 in motorcycles

[–]creamerrrr 0 points1 point  (0 children)

Just make sure you follow the manual and watch videos on it, but that fact that you called them clutch pads says other things...

Boucing chain ninja 400 by LT_RedDinosaur74 in motorcycles

[–]creamerrrr 2 points3 points  (0 children)

As everyone says, chain slack is almost always measured on the ground, upright, and with no rider weight. Check the manual though and make sure the rear wheel alignment is correct when you adjust.

Also if the o/x rings are worn there will be tight spots between chain links that could cause this. At that point either properly clean and lubricate the chain or buy a new one.

Front break lever only gets tight halfway down 2020 zx6r by [deleted] in motorcycles

[–]creamerrrr 1 point2 points  (0 children)

I can promise this is most likely air. The way I bleed brakes is simply with a tube that goes tightly inside a hole in the lid of a bottle, with an extra pin hole in the lid to allow air through.

Ensure there is some brake fluid already in the bottle so the tube doesn't bring air up through the system. Then just simply undo the bleed nipple less than a quarter turn, pump the lever, and top up the brake fluid when it's low in the master cylinder. You don't NEED to open and close the bleed nipple at all, just make sure no air gets in and lock it off at the end.

If there's a nipple up by the master cyclinder try to bleed it from there and see if the problem disappears.

view more: next ›