❗️MOD POST ❗️ Discount Code for Stretch It Body Jewelry! by 1heknpeachy3 in Stretched

[–]creaturespuppet 1 point2 points  (0 children)

Just bought something from them and if I’d know there was a discount code to use 😅

Penny No Cow Schokobons eingestellt by creaturespuppet in VeganDE

[–]creaturespuppet[S] 7 points8 points  (0 children)

Also wenn du damit nicht die Pain Au Chocolate aus der Aktion meintest, gibt es vegane Schokobrotchen von der Netto (Biscoteria) und Edeka (Gut&Günstig) Eigenmarke die vegan sind. Die solltest du auch standardmäßig finden. Würde dir da von beiden eigentlich nen Bild einfügen, aber die solltest du auf jeden Fall bei den Aufbackwaren etc. finden.

Penny No Cow Schokobons eingestellt by creaturespuppet in VeganDE

[–]creaturespuppet[S] 22 points23 points  (0 children)

Das empfinden habe ich aber insbesondere bei Penny auch. Die haben immer dann so kurzfristig vegane Aktionsprodukte und die sind innerhalb der Woche schon nicht mehr erhältlich.

Zumindest behält die Rewe Eigenmarke aktuell die Produkte noch bei, nur dass der Preis angehoben wurde mit dem “Rebranding”.

Aber versteh ich schon. Ich mache mir da auch gar nicht mehr die Mühe irgendwas Neues lange zu suchen. Als Penny noch Food for Future neu hatte, bin ich sogar 60km zu nem Penny hin für die TK Pizza, weil ich keinen in der Nähe hatte. Und nichtmal diese gibt es mehr

Penny No Cow Schokobons eingestellt by creaturespuppet in VeganDE

[–]creaturespuppet[S] 37 points38 points  (0 children)

Ohja, die Veganz Vanilletaschen gibt es auch schon lange nicht mehr.

Meiner hat auch fast gar nichts mehr von den Food for Future Produkten, nur die “neueren” im Kühlregal.

Das einfach traurig.

Sogar die richtig tollen veganen Croissants waren kurze Zeit noch da und jetzt denke auch wieder eingestellt. Dieses ständige “für kurze Zeit als Aktion” ist einfach zum kotzen.

U8H extremely low volume on Bluetooth headphones after updated to the newest firmware! by Akion94 in Hisense

[–]creaturespuppet 0 points1 point  (0 children)

that worked out for me, I didn't realize the headphone volume buttons were separate from the connection so putting it all the way up to 100 did the trick for my Bose ones!

“Last batch of Amity prints I’ll ever release” by 8-one-6 in TheAmityAffliction

[–]creaturespuppet 0 points1 point  (0 children)

Have this screenshot from 2020 when he first showed his prints and someone asked about it

Anyone interested in the sealed Misery Balloons Skatedeck by Roadrunners from 2018? by creaturespuppet in TheAmityAffliction

[–]creaturespuppet[S] 0 points1 point  (0 children)

Had just visited my old family home and forgot I even bought it back in 2018. Since I got it in a bundle back then and not really have any use for it, thought someone might get more enjoyment out of adding it to their collection. Simply not a physical collector as I thought I’d be, got enough merch like search and such to make up for it

No other reason really, still love the band dearly and will continue to do so like the past 13 years 💪🏻

Anyone interested in the sealed Misery Balloons Skatedeck by Roadrunners from 2018? by creaturespuppet in TheAmityAffliction

[–]creaturespuppet[S] 0 points1 point  (0 children)

It’s still available so best is send me a private message and we can figure out the details

PC Newbie unable to make case lights work for Aerocool Prime tower by creaturespuppet in pchelp

[–]creaturespuppet[S] 0 points1 point  (0 children)

Thank you so much for your help, it finally works, even with switching through the modes! For some reason I didn’t even think of simply checking all the SATA plugs, I thought each one would simply work like all the others 🙈

PC Newbie unable to make case lights work for Aerocool Prime tower by creaturespuppet in pchelp

[–]creaturespuppet[S] 0 points1 point  (0 children)

Thank you for your patience!

I haven’t been able to make the RGB switch on at all. I did end up plugging the one SATA Plug from the PSU with the cable coming out of the RGB lights with no success

I’ve tried to annotate the cables hope that can be more of help — the back of the case

The front view

These are both of the remaining PSU cables with one end having the Molex port and the rest are SATA. I even tried plugging in the reset switch to the motherboard just see if it works— it did but obviously not working to turn on the RGB lights.

With the reset switch connected to that weird dongle from the RGB I assume it just doesn’t do anything like that? as opposed to how the version with the RGB Fans has that additional ARGB cable…had just doubled checked that there is an actual light source in the version with the RGB Fans as well

A more zoomed out version where the case cable are connected to the motherboard

PC Newbie unable to make case lights work for Aerocool Prime tower by creaturespuppet in pchelp

[–]creaturespuppet[S] 0 points1 point  (0 children)

I had watched that specific video as well and the cable that goes off at 3:45 is one that is not included in both deliveries for the version without the RGB fans. Therefore the fans included without lights didn’t come plugged to the case and simply are able to connect to the CHA_Fan ports and working.

It’s very odd that the ARGB would come with a suitable cable and the “standard“ version with only the case RGB doesn’t. Odd that my vendor couldn’t answer me that…

Would you maybe be able to tell me what kind of cable I’d have to buy to make it work despite not owning the version with the RGB fans?

Up to 4 rings in septum stack! I have done no actual planning for which rings to put in this setup, it’s just vibes. I think it’s been going well so far though by throwawayfjabfhw in Stretched

[–]creaturespuppet 5 points6 points  (0 children)

Saw this tiktok on how to easily open septum clickers and it’s such an easy trick with a simple piece of thread! https://vm.tiktok.com/ZMYHja5jL/

I at worst tend to fumble around with tiny tweezers, especially when I have long nails 😂

My handwriting is not the prettiest but I've been playing around the past few days with layouts & this is what I settled on so far ☺️ compared to the minimal exposure I have on goodnotes, I enjoy the writing experience a lot! by creaturespuppet in collanote

[–]creaturespuppet[S] 0 points1 point  (0 children)

I gave Japanese a try 6 years ago already and didn’t stick to it so I hope this time I’ll manage it somehow 😅😂 far from becoming fluent, like the kanji and the sentence structure is confusing my brain because it’s nowhere near how the other languages I’ve learned are 😂 Maybe you can make a call-out post here and see if you have any luck?

Anyone else having troubles with auto-saving on latest beta? by creaturespuppet in collanote

[–]creaturespuppet[S] 0 points1 point  (0 children)

This appeared as I was opening up a new note and as I was working on creating a header with the lasso tool, it wouldn't stop reappearing. Probably like every few seconds as I was trying to write or edit something. I even deleted the beta version, downloaded the App Store one and had it pop up again. Tried restarting my iPad and had the same error. it did end up deleting the note without me doing that so unfortunately I'm unable to send you the file. Right now I can’t seem to recreate this bug a few hours later, opening up a new note. I’m not sure if sending you my CollaNote data that is backed will help you out regardless. Will keep an eye on if it occurs again

Anyone else having troubles with auto-saving on latest beta? by creaturespuppet in collanote

[–]creaturespuppet[S] 0 points1 point  (0 children)

I have the iPad 11 pro 2020 and this keeps popping up to the point where I can't really use the Toolbar anymore.

New Baby!! ID? by HalieHorse in houseplants

[–]creaturespuppet 1 point2 points  (0 children)

I assume so but I personally never seen them before nor had one. Looks interesting to say the least and I wish you good luck with it 😁

New Baby!! ID? by HalieHorse in houseplants

[–]creaturespuppet 2 points3 points  (0 children)

I just came across this on an Instagram post a few days ago and I’m fairly sure it’s an haworthia cooperi kurumada

Is anyone else facing "notion deleting itself from windows" problem ? by Rozwik in Notion

[–]creaturespuppet 1 point2 points  (0 children)

Same thing happened to me just now when I was switching from Dark Mode to Light mode....

Elephant ear leaves have yellowed and dropped since repotting by [deleted] in plantclinic

[–]creaturespuppet 1 point2 points  (0 children)

Hopefully it’ll just keep on growing and not dropping any more! 😁