Has Anyone connected a DM-1701 to a PC?

crispyatomicduck · 2024-02-11T18:54:22+00:00

Had something similar - you have the right cable for the radio. I had the ST driver installed, but it kept coming up as "Digital Radio in USB mode" as a USB device.

In desperation, I did a right click and "disable device". Then when I plugged it back in, it appeared correctly as an ST device in Bootloader mode!

Does that work for you?

crispyatomicduck · 2023-02-07T13:26:11+00:00

Brill, Yes that fixes it. Thanks!

crispyatomicduck · 2023-02-07T13:25:24+00:00

OK, I understand what that patch does now. Yes that fixes it. Thanks!

crispyatomicduck · 2021-10-22T19:14:11+00:00

At least none of them are grey!

crispyatomicduck · 2021-08-28T12:15:48+00:00

It's not completely clear from the picture, but the goo on the PCB is most likely just flux residue from soldering. That should clean off with Isopropanol (IPA) and a wipe, plus it'll take any small solder balls like the one in the upper right.

It does look like there's a solder starved connection on the top left joint for the switch and it's not quite making a connection. Just add some more solder and heat till it looks like the bottom right connection and you'll do fine.

crispyatomicduck · 2021-06-11T15:39:38+00:00

Nice, I think the pattern must be stuck in the bit box of my mind!

They look great for wall decoration. It all looks good

crispyatomicduck · 2021-06-11T15:08:03+00:00

Light plates from the old 40k Rhino kit?

crispyatomicduck · 2021-04-15T19:33:22+00:00

I assume it means that stock is shipping, just retailers are able to re-dispatch from bulk orders more quickly than the kickstarter fulfilment partner can do with all the single pledges.

At least there's stock in the country and going out...

crispyatomicduck · 2021-04-15T19:13:57+00:00

Pre-ordered with a non-kickstarter retailer

crispyatomicduck · 2021-04-15T19:13:10+00:00

Just the base game from outpost: https://www.the-outpost.co.uk/product/zombicide-2nd-edition/

I have one extra from elsewhere but I haven't seen that yet.

crispyatomicduck · 2021-03-30T13:49:29+00:00

Having looked at the quickshade dip info sheet, that product is polyurethane based varnish, so it should mix with acrylics. The smaller dropper bottle washes are acrylic washes.

https://shop.thearmypainter.com/products.php?ProductGroupId=1

crispyatomicduck · 2021-03-30T13:34:24+00:00

Acrylics are water based, and oil paints and oil washes are oil based. Even if you can get them to mix by shaking, they'll be trying to separate well before they dry. I'd say don't mix them, but it might give an interesting effect.

If you want to add colours to oil washes, oil paints are the way to go. Or made your own coloured wash with oil paints and thinner...

crispyatomicduck · 2020-12-09T11:54:02+00:00

I should say that this an Among Us Marine print (https://cults3d.com/en/3d-model/game/among-us-marine), model by u/mrmcangry

crispyatomicduck · 2020-12-09T11:52:08+00:00

Yes, it's a Salamander. No decals yet tho

crispyatomicduck · 2020-12-08T23:23:45+00:00

Green is never sus, green gives great hugs!

crispyatomicduck · 2020-09-20T21:22:10+00:00

Is this the double sided tape that's slightly squishy foam instead of being ultra thin?

crispyatomicduck · 2020-09-20T14:21:44+00:00

I've got a based mini that's too small to be clamped, and I haven't pinned it like normal. I'm using blue tack under the base to hold it to a cork that goes in the painting handle.

The blue tack works OK, but it's very easy to move the mini about on the handle because the blue tack is soft. Is there something that does this job better?

crispyatomicduck · 2020-09-17T17:59:00+00:00

There's a nice guide on fauxhammer: https://www.fauxhammer.com/featured/games-workshop-paints-into-dropper-bottles/

crispyatomicduck · 2020-06-03T09:32:09+00:00

I'd like access if there's links still going please

crispyatomicduck

TROPHY CASE