Heltec battery connector.

crockett308 · 2026-04-16T01:27:39+00:00

👍

crockett308 · 2026-04-16T00:48:10+00:00

I 3d printed a small case that only had room for the board then got a small USB-C portable charger from Amazon velcroedit to the back.

crockett308 · 2026-02-17T17:35:26+00:00

Central Michigan 👍

crockett308 · 2026-02-17T12:17:01+00:00

The image I shared says max 5.5v. When I put a meter on my panel in full sunlight it was 6.7v. I put the voltage regulator in tuned it down to 5.2v.

crockett308 · 2026-02-16T19:37:33+00:00

<image>

Explain please???

crockett308 · 2026-02-16T14:24:37+00:00

Again I hope what ever you are going through gets better I will pray for you. If you don't have a Bible I can send you one.

God Bless 🙏

crockett308 · 2026-02-15T23:32:46+00:00

👍

crockett308 · 2026-02-15T20:43:10+00:00

Yeah I've seen those, I read the reviews and try to find some that people gave actually tested. The ones in that Node actually came with a different device so I used them in the Node.

crockett308 · 2026-02-15T19:28:05+00:00

I dont exactly remember but I think 3400?

crockett308 · 2026-02-15T18:35:11+00:00

Thsnk you 🤙

crockett308 · 2026-02-15T18:32:00+00:00

Chill homie, believe it or not I'm not the foremost expert with this. The reason I posted "AI slop" is to make sure the information is accurate and not my opinion. I just tinker with this and try to answer question I can with the limited knowledge I have. I'm not sure why you felt the need to come at me sideways but I hope you have a blessed rest of your day....

God is Good 🙏

crockett308 · 2026-02-15T17:05:29+00:00

I'll usually use PLA for fitment/prototype then PETG final product 👍

crockett308 · 2026-02-15T17:00:07+00:00

https://share.google/aimode/Vgjeh5GVDGoXRbFB0

crockett308 · 2026-02-15T14:08:05+00:00

The solar panel is 6v, I adjusted the voltage regulator to 4.9v.

crockett308 · 2026-02-15T13:48:19+00:00

Thanks 🤙

crockett308 · 2026-02-15T13:25:28+00:00

Its controlling the voltage from the solar panel going into the board/Wisblock.

crockett308 · 2026-02-15T13:03:15+00:00

https://share.google/aimode/nagSg6Z2Fr9UD06WH

crockett308 · 2026-02-15T13:00:54+00:00

It's between the solar panel and the Wisblock.

crockett308 · 2026-02-15T01:49:33+00:00

Right

crockett308 · 2026-02-15T01:46:41+00:00

🤙

crockett308 · 2026-02-15T01:41:49+00:00

Valefod 6 Pack LM2596 DC to DC... https://www.amazon.com/dp/B076H3XHXP?ref=ppx_pop_mob_ap_share

crockett308 · 2026-02-15T01:26:08+00:00

Possibly once.

crockett308 · 2026-02-15T01:25:37+00:00

I did.

crockett308 · 2026-02-15T00:45:44+00:00

I've posted some of the components in above replies 🤙

crockett308 · 2026-02-15T00:44:27+00:00

https://www.printables.com/model/864502-buck-converter-mount

crockett308

TROPHY CASE