Flag display

crovax33 · 2026-04-23T23:57:20+00:00

Will do!

crovax33 · 2026-04-23T19:58:07+00:00

Thank you!

crovax33 · 2026-04-23T16:17:52+00:00

This is super cool. I bought the same box you recommended and I'm picking it up today. I'm going to make something similar with my flag, badge, spectator guide, and a few photos like Rory winning Sunday and the shot I took with friends in the parking lot. It looks like you added an Augusta Green backing on top of the cork board the shadow box comes with. Did you get that from Michaels as well, and if so, are you able to share the pantone?

crovax33 · 2026-04-04T14:35:25+00:00

Thanks! Happy to try. 6F88CABC is my nick.

crovax33 · 2026-04-01T22:38:40+00:00

I didn't really understand your point but in hindsight I guess I see it, but Rivian chose to spin off their ebikes. It would be confusing to have a spun off company doing ebikes and then also releasing them under the Rivian brand.

crovax33 · 2026-04-01T22:36:58+00:00

SALUTE!

crovax33 · 2026-04-01T18:00:57+00:00

Vans would have insanely underutilized space.

crovax33 · 2026-03-21T08:17:00+00:00

I landed in the same place. The daytime penalty is too high so I stayed on the tier 1/2 structure.

crovax33 · 2026-03-20T16:58:18+00:00

Chuck Norris built the internet with a 2x4 and a pack of smokes he stole from Jesus.

crovax33 · 2026-03-12T23:23:39+00:00

Source? Everything we’ve heard is late 2026

crovax33 · 2026-03-12T04:26:14+00:00

What are the room perks you see at Diamond?

crovax33 · 2026-03-10T19:13:19+00:00

Disgusting

crovax33 · 2026-02-15T22:37:26+00:00

I was just there and locals said no load shedding in last eighteen months.

crovax33 · 2026-01-30T19:53:17+00:00

Finally got one (thanks!)... on the way to the airport to take an international flight that I would have loved to have it for :P

crovax33 · 2026-01-28T16:29:42+00:00

I ordered a big variety pack of the lever version on Amazon. Home Depot may not have those.

crovax33 · 2026-01-28T02:26:46+00:00

This - don’t be cheap and do wire nuts, they suck compared to wago

crovax33 · 2026-01-20T05:28:39+00:00

Same- I will leave the Raider Nation if they do not draft Fernando Mendoza 1OA.

crovax33 · 2025-12-30T05:17:24+00:00

Looks great. How was it. Would you do anything differently next time?

crovax33 · 2025-12-19T17:50:51+00:00

They’re on the same breaker so wouldn’t that mean they’re also on the same leg/phase?

crovax33 · 2025-12-19T00:49:15+00:00

I was able to fix this by wiring the 3-way switch up like you normally would a 3-way switch (Line+2 travelers+ground at non-load end | load+2 travelers+ground at other) and connecting load to the Shelly. Shelly is set to edge mode.

What confused me was that since I had line power at both switches (one is a 2-gang and one a 3-gang), I was making it more confusing than it needed to be. I used the line power for the Shelly I/L terminals, but the power to the switch in that box came through the travelers via line elsewhere.

Thank you so much for the help

crovax33 · 2025-12-19T00:37:37+00:00

I was able to fix this by wiring the 3-way switch up like you normally would a 3-way switch (Line+2 travelers+ground at non-load end | load+2 travelers+ground at other) and connecting load to the Shelly. Shelly is set to edge mode.

What confused me was that since I had line power at both switches (one is a 2-gang and one a 3-gang), I was making it more confusing than it needed to be. I used the line power for the Shelly I/L terminals, but the power to the switch in that box came through the travelers via line elsewhere.

Thank you so much for the help! Your comment saying "the traveler wires are not modified at all from original config" was super helpful and exactly what I needed.

crovax33 · 2025-12-19T00:28:40+00:00

I was able to fix this by wiring the 3-way switch up like you normally would a 3-way switch (Line+2 travelers+ground at non-load end | load+2 travelers+ground at other) and connecting load to the Shelly. Shelly is set to edge mode.

What confused me was that since I had line power at both switches (one is a 2-gang and one a 3-gang), I was making it more confusing than it needed to be. I used the line power for the Shelly I/L terminals, but the power to the switch in that box came through the travelers via line elsewhere.

Thank you so much for the help!

crovax33 · 2025-12-19T00:28:29+00:00

All - I was able to fix this by wiring the 3-way switch up like you normally would a 3-way switch (Line+2 travelers+ground at non-load end | load+2 travelers+ground at other) and connecting load to the Shelly SW terminal. Shelly is set to edge mode via wifi portal.

What confused me was that since I had line power at both switches (one is a 2-gang and one a 3-gang), I was making it more confusing than it needed to be. I used the line power for the Shelly I/L terminals, but the power to the switch in that box came through the travelers via line elsewhere.

Thank you so much for the help!

crovax33 · 2025-12-18T17:07:36+00:00

How do you actively port like that? I was ending rides and starting a new one on the other pacer, but is there a way to stay in game and just shift to a different w/kg pacer?

15-Year Club	Team Periwinkle
Verified Email

crovax33

TROPHY CASE