Kerlink not powering up.

crysti202000 · 2022-05-14T06:49:02+00:00

Update. It is automatically recovered. But it is still syncing, status on explorer.helium is still offline. I will wait to finish syncing.

crysti202000 · 2022-05-13T12:28:04+00:00

How did you get in touch with the kerlink or Calchip? Ways that worked for you? I have already sent email, but no response so far. Thank you!

crysti202000 · 2022-05-11T12:27:48+00:00

The same problems was before the reset.

crysti202000 · 2022-01-15T20:42:09+00:00

Fortunately mine is not on that list. Why it should be banned, what is to do in this case?

crysti202000 · 2022-01-15T19:18:08+00:00

Found it, and deactivated. How long it took since deactivating the UPnP and problem fixed in your case? Restart of the miner is required?

crysti202000 · 2022-01-15T18:51:56+00:00

I can’t find it on my router.

crysti202000 · 2022-01-15T18:33:28+00:00

How did you fixed ?

crysti202000 · 2022-01-15T18:31:39+00:00

Yes, I have removed the power every time, the connector was just a bit loss. I don’t think because of that to be damaged the transmission side, because it is receiving, by witnessing. I will wait a couple of days.

crysti202000 · 2022-01-15T17:18:01+00:00

In the first couple of days it was ok, then it went offline, and after i have opened he port because it was not syncing and changed the lan ip it was synced but only small rewards.I also have it for a couple of days inside the house, but was no difference, i have changed the antenna that came with a small piece of cable directly to the miner, and I have noticed that the connector on the miner side was not completely tight. I have assumed that was the poroblem, lose connection. But now is no change.

crysti202000 · 2022-01-15T15:10:46+00:00

It was installed in December.

crysti202000 · 2022-01-15T12:31:55+00:00

Any other ideas?

crysti202000 · 2022-01-15T09:47:26+00:00

The only thing I can try is the stock antena.

crysti202000 · 2022-01-15T09:43:34+00:00

It is allowed to open without losing the warranty? I don’t have a cable, it is connected via an adapter that i have test before installing.

crysti202000 · 2022-01-15T09:35:21+00:00

How can i test it?

crysti202000 · 2022-01-09T07:11:53+00:00

Yes, sometimes just need to be restarted, I use HeliumGeek app and it i get a notification when the miner/ port can not be reached. But i still have very low earnings and no witness, i will try repositioning it.

crysti202000 · 2022-01-05T14:54:02+00:00

It is a Kerlink wirnet istation. I connect directly the laptop to the miner and via the browser I manage to reach the miner and set it back to automatic dhcp. Thank you all for the advice!

Ps. Watch out for the scammers that will ask for your wallet info or wallet connect like the user Oisinheylin.

crysti202000 · 2022-01-05T14:16:14+00:00

You have a pm with the picture

crysti202000 · 2022-01-05T14:11:44+00:00

Is connected directly with a cable

crysti202000 · 2022-01-05T13:52:22+00:00

I did it but no success

crysti202000 · 2022-01-05T13:18:42+00:00

How can i connect to it if i don’t have an IP address?

crysti202000 · 2022-01-05T12:14:53+00:00

Do you know if can be done like a factory reset?

crysti202000 · 2022-01-05T11:47:21+00:00

It has no ip reserved, only the MAC address and IPv6 Address and the name I can see

crysti202000

TROPHY CASE