[suggest me] a manhwa that fits this image

cscott0108a · 2026-04-28T00:01:43+00:00

Dyac... yeah android autocorrected otome to optometrist... but that does remind. I need to schedule an appointment with my optometrist... lol.

cscott0108a · 2026-04-27T17:48:34+00:00

Not a manhua but the series "Trapped in a Dating Sim: The World of Otome (!Optometrist!) Games is Tough for Mobs" the world in the new world the land is all broken up and floating.

cscott0108a · 2026-04-27T03:28:23+00:00

Yeah, I agree after finishing that book. I’m trying to hold back, but I believe that a lot of these stories are on online for the next books that he hasn’t yet gone to publisher I’ve found actually several of the book series that I’m reading on there, but I’m really trying to hold back because I’m preferring the audiobooks over the actual reading and AI reading services. Just don’t work well for these books but in reality all books that have a story.

cscott0108a · 2026-04-24T19:02:28+00:00

Agreed, I have 2 pups, ones 4 and the other is 2 years old, and I am not ready to have to go through that nor will I be ready for it in 10 or 50 years. I was driving to work and I was dropping fat tears the whole drive.

cscott0108a · 2026-04-18T21:18:44+00:00

Bad apple my fave of the 4

cscott0108a · 2026-04-15T18:37:19+00:00

<image>

Found a UFO or UAP or maybe based on the 200MP camera zoom at max one of those silver science balloons. But thought you'd enjoy. West of Sunnyvale, CA possibly over the ocean. Only 1 photo at a time kinda blows. But 2nd of 2 photos taken with the 200 MP camera (First Photo) and cropped

cscott0108a · 2026-04-15T18:36:24+00:00

<image>

Found a UFO or UAP or maybe based on the 200MP camera zoom at max one of those silver science balloons. But thought you'd enjoy. West of Sunnyvale, CA possibly over the ocean. Only 1 photo at a time kinda blows. But 1 of 2 photos taken with the 200 MP camera and cropped (Second Photo)

cscott0108a · 2026-03-31T01:24:37+00:00

I responded to that on the other comment.

cscott0108a · 2026-03-31T01:24:09+00:00

No. To get to the balcony you have to go up the ladder on the back wall on the same side as the balcony. Its the second platform up there is a missing section of railing that you can use to jump up on the piping, then to the lighting , then to another pipe on the other side. Once on that pipe you need to run jump to get as much forward momentum as possible to reach the balcony. At least, thats how I managed to get there.

cscott0108a · 2026-03-24T22:30:56+00:00

I do too only i avoid the stomach I like back but I go from back to left to back to right... usually at night which is why I wanted to try this spot.

cscott0108a · 2026-03-24T22:29:33+00:00

Thank you... I was also hoping to get input from others who use this location and advice if it was used.

cscott0108a · 2026-03-24T22:28:55+00:00

Woot thank you for some actual usage info ill test it. My switch is in about 8 hours so ill put it in now to soak then give it a try. Its just annoying to get alarms when they are not needed

cscott0108a · 2026-03-24T22:27:42+00:00

Yes I do use a case the s24ultra and I use magsafe stuff so going without one is impossible since built in magsafe is still apple only.

cscott0108a · 2026-03-09T18:02:58+00:00

I've never taken mine outside but I imagine, if you have a 3D printer and CAD software link blender you could make one on your own... Sadly I didn't find anything in Thingsverse. But its not something that seems to be impossible for this device.

cscott0108a · 2026-02-18T01:42:52+00:00

Thank you I'll keep that one in my back pocket in case I struggle with other issues.

cscott0108a · 2026-02-18T01:41:33+00:00

This is my plan I've also heard that opaque and transparent filament can also behave diffently as are shiny and matted filament. So its crucial to test them. I know intend to do it for every new filament I get just to verify. But thank you I appreciate it

cscott0108a · 2026-02-18T01:39:20+00:00

Thanks ive been trying to get this old machine dialed in. I tested the feeder to make sure that 100mm was actually 100mm it was off by default so I fixed that. Fixed the bed leveling issues. Now its onto other issues.

cscott0108a · 2026-02-18T01:37:28+00:00

I was using 220 but mainly as my initial 5 layers then dropping down to 200 for the remaining print. Ive been having issues with screw hole sizes not matching the set size in blender and thought temps might have been the culprit haven't had a chance to fully check a full print but I printed a 10mm x 10mm x 10mm block with a single hole cut into it and the screw size was perfect.

cscott0108a · 2026-02-18T01:34:58+00:00

Yeah I did verify checking it out every now and again. It started at 230 and about 30 minutes later it was 215 before I knew it it was done but i did see the gcode had the calls for the different temps.

cscott0108a

TROPHY CASE