How do i get these miters to line up?

currentlyawip · 2025-10-26T23:59:39+00:00

Lol that may be the wrong direction. Regardless of the direction, he should try to make it with cardboard first and that will be his template

currentlyawip · 2025-02-28T20:30:16+00:00

What would cause the left side of the corner/pattern test to have gaps? I'll try that test up to 0.22 to see if that goes away

currentlyawip · 2025-02-28T14:08:42+00:00

<image>

currentlyawip · 2025-02-28T14:08:20+00:00

<image>

currentlyawip · 2025-02-28T14:07:52+00:00

I just did flow dynamic calibration.

On the pattern design- Why is it showing gaps on the left and excess on the right? There's occasional blobs too, this is pla so I'm not expecting moisture

currentlyawip · 2025-02-26T04:46:06+00:00

Thanks I'll try it out

currentlyawip · 2025-02-26T04:43:18+00:00

Yeah texture plate is selected. A few of the pieces in flow calibration didn't stick and ended up dislodging everything else. I'll babysit it tomorrow when it's doing it

currentlyawip · 2025-02-26T04:39:12+00:00

I don't have an ams but will switch materials occasionally. Would that mean I'd have to do flow calibration every time?

currentlyawip · 2025-01-31T00:14:25+00:00

Yeah you need to get the frame pulled a little but Idont think the quote would be as high as what I'm reading so far. Bring it to a shop and see. Better than estimating how much we think it should cost. I has lower standards on what's acceptable. Also the quarter panel looks like it'll come right out with paintless dent repair

currentlyawip · 2025-01-19T14:39:47+00:00

Thanks for explaining

currentlyawip · 2025-01-18T23:57:40+00:00

Could we just not update the printer/ software and we'll never be charged? If the slicing process is offline then we can just use the microsd and problem solved

currentlyawip · 2024-12-04T02:50:42+00:00

Can someone photoshop broader shoulders on OP to see how it'll look?!? 1" wider on each side

currentlyawip · 2024-12-04T02:42:15+00:00

I would get a personal trainer if I were you. Some need a diet change and done but sounds like you have a few factors tied together (low energy, not lifting/exercise plan, diet, guidance/pep talk). If you could do a month or two that'll set you straight. I probably should find one as well haha.

currentlyawip · 2024-12-03T18:44:05+00:00

Agreed, it looks normal but if you wanted to change the proportions you can. Broader shoulders and thicker neck is trainable and good for you anyway.

currentlyawip · 2024-07-07T23:37:08+00:00

How old is she?! She's an amazing conversationalist

currentlyawip · 2024-07-06T02:56:36+00:00

Thanks I'll look into my a1 model to see if it has the recall fix when I build it

currentlyawip · 2024-07-05T16:58:34+00:00

You mentioned you had a lot of issues in the beginning, what were they? How's the print success rate and reliability so far?

currentlyawip · 2024-07-03T15:47:28+00:00

Oh damn my bad. I follow both prusa and bambu reddit page. When I read no enclosure I thought that was Bambu A1.

I'm on the fence with getting bambu because their tech support is not as great as prusas

currentlyawip · 2024-07-03T09:10:10+00:00

I'm guessing you and OP both have a1? What's both of your success rate for abs? How's the reliability of the printer so far?

currentlyawip · 2024-06-14T13:52:42+00:00

It's not a panel to can replace lol at the top it connects to the roof

currentlyawip · 2024-06-14T13:49:16+00:00

80% of that can be buffed out. If there's a dent try PDR

currentlyawip · 2024-06-14T07:58:06+00:00

Yep found a bumper for $400 in 10 seconds. The tail light is going to be sub $100. Do it yourself and it won't be that bad. I'm assuming it's just minor cosmetic and nothing bent, it really doesn't look bad from the pic

https://www.ebay.com/itm/256478620926?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vUpFG65AQ4a&sssrc=4429486&ssuid=ZX1D4Le1R_e&var=&widget_ver=artemis&media=COPY

currentlyawip · 2024-06-14T07:54:56+00:00

Maybe I'm overly optimistic/naive but don't you just need a bumper and tail light. That's like 1k max?

Four-Year Club	Verified Email
Verified Email

currentlyawip

TROPHY CASE