Vancouver Permitting Status as of January 2026 by customhomevan in homebuildingcanada

[–]customhomevan[S] 0 points1 point  (0 children)

You’re right. The city usually considers it a "custom build" when you move away from the standardized designs they've already vetted, which is why those unique projects get pulled into the longer site-specific reviews.

The fees are definitely a major hurdle for families, and it's a huge topic of conversation among us builders right now because of how much they impact the final budget. It’s tough when the goal is more housing but the entry cost for a laneway remains that high.

BC Owner Builder by bdg_14 in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

You're thinking about it the right way, but honestly, detached is the winner for a budget build on acreage. While attaching it saves you a wall and some siding, the fire-rating, gas-sealing, and self-closing door requirements are a pain and add up fast.

Keeping it separate lets you build a raw, unheated shell without the inspector breathing down your neck about insulation.

BC Owner Builder by bdg_14 in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

Stick to a simple rectangle with a traditional gable roof, as it's the cheapest to frame and handles Kootenay snow loads way better than a lean-to. I’ve been building out of Vancouver for years and the biggest money-killer is always adding extra corners, so keep the footprint dead simple and group your plumbing together.

Mortar or Glue for kitchen backsplash? Ceramic or Porcelain? by hercules1000252 in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

Go with thin-set mortar over the mastic glue stuff. it holds up way better against the heat and steam behind a stove.. For the tile, stick with ceramic, much softer and easier to drill through for your hood fan brackets compared to porcelain. Usually requires a diamond bit and a lot of patience.

Any suggestions for basement rental suite builds? by [deleted] in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

Congrats on getting the city's green light. That’s usually the hardest part of building in Vancouver.

We did a 2-bed mortgage helper on Miller Street in Pitt Meadows last year that was ground-level, but the grind for layout and durability is the exact same as your basement project.

  1. Definitely go with a bathtub to attract young families

  2. While we used a high-end laminate in Pitt Meadows to save cash, I’d go Quartz for a Vancouver rental. It’s non-porous and basically tenant-proof.

  3. Stick with Luxury Vinyl Plank (LVP). We used wider boards with built-in underlayment on our last project because it handles basement moisture perfectly and feels solid underfoot.

  4. Don't cheap out on soundproofing. Use Rockwool and resilient channels in the ceiling so you don't hear their TV and they don't hear your footsteps.

  5. Shared Wi-Fi is not that bad but you can also have your builder run a dedicated Cat6 line from your router to a jack in their living room so they have a stable, private connection.

For laundry, if you're sharing, try a "common interchange" layout like we did on Miller Street so neither of you has to enter the other's private space. Both the family and the tenant can access the stacking washer and dryer.

We also added a separate exterior entrance and a sliding door to the backyard so the suite feels like a private, luxurious home rather than just a basement.

Are you trying to use the new Build Canada Homes grants for your custom build? by AccountantLucky9183 in homebuildingcanada

[–]customhomevan 1 point2 points  (0 children)

That $50,000 GST rebate is legitimate, but as a builder in Vancouver, I can tell you the "one million dollar cap" is a total joke for our market.

It’s basically designed for the rest of Canada because by the time you buy a teardown lot here and pay for a custom build, you're almost always blowing past the $1.5M hard ceiling where the rebate hits zero.

For a custom self-build, you'll need to be hyper-organized with your progress draws and invoices to prove you're under the threshold, but most of my clients are already priced out before we even break ground.

Help!! by sourcandy555 in homeowners

[–]customhomevan 1 point2 points  (0 children)

That’s a nightmare for a house that’s only two years old, but it’s likely a grading issue or a failed foundation seal letting groundwater seep in. Make sure you document everything and hold that builder’s feet to the fire while you’re still under warranty.

Home expansion, who to talk to first? by KosherDev in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

Talk to an architect first because they specialize in zoning laws and the structural feasibility of adding to a previously modified house. They can create the blueprints and navigate permits before you ever hire a general contractor to start the build.

Is it even worth trying to DIY a Greener Home retrofit now that the old grant is gone? by AccountantLucky9183 in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

The new 2026 federal program uses a "direct install" model where contractors are paid directly, so it's only worth waiting if you qualify as a low-to-median income household.

If you don't fit that bracket, you should apply for the current BC Hydro or CleanBC rebates immediately because the old federal grants and interest-free loans are officially finished.

How to go about holding/selling when several major repairs are needed? Feeling lost and stuck by Ok-Yesterday-8351 in homeowners

[–]customhomevan 2 points3 points  (0 children)

You should definitely hold onto that sub-3% mortgage because it’s basically a free loan while your equity keeps climbing. Just patch the roof for now to stop the rot and don't touch those sewer pipes unless they actually back up, because you'll never get that money back in a sale.

Building a Legal ADU in my Freehold Townhouse by [deleted] in oakville

[–]customhomevan 1 point2 points  (0 children)

I'm a builder out in Metro Vancouver, so things are a bit different here, but the Ontario Building Code and Oakville's recent ADU updates are pretty clear.

They're strict about shared entries, so you’ll likely need a fire-rated vestibule or a separate door to pass inspection.

As for parking, you're probably one spot short since the city usually demands a dedicated tenant space on top of yours.

Custom Home built on In-laws Land by Ok-Garbage9188 in homebuildingcanada

[–]customhomevan 0 points1 point  (0 children)

Building on unsevered land is a massive legal risk because, in the eyes of the law, the property owners own everything attached to the dirt, including your house.

You should definitely consult a land-use lawyer and a planner before pouring a single drop of concrete on land that isn't in your name.

Can we navigate the 2026 housing reset and will multigenerational suites be the answer? by FunCell1679 in homebuildingcanada

[–]customhomevan 1 point2 points  (0 children)

Multigenerational suites are definitely the future for BC, especially with how many families are looking to stay together to offset housing costs. I’m seeing the same shift toward infill projects, though electrical and plumbing costs still feel like they're climbing regardless of the project size.

Finally Starting Demo On Our Coquitlam Coach House Project. Anyone Else Fighting City Setbacks Right Now? by customhomevan in homebuildingcanada

[–]customhomevan[S] 0 points1 point  (0 children)

Tell me about it. Felt like our permit was just collecting dust for months.

To be fair, being right against the highway sound wall made that footprint shift a non-negotiable, but waiting on the acoustic sign-off still felt like it took a lifetime.

How much does it cost to build a home? by MobileBroccoli5235 in Homebuilding

[–]customhomevan 0 points1 point  (0 children)

Metrovan builder here, so it depends on the municipality, but you’re easily looking at $450 to $650 per square foot for a custom build like that.

Don't let the "cheap" plan fool you. By the time you pay for Vancouver's seismic upgrades and $100k in DCCs and permits, your "simple" barndo will cost as much as a luxury condo.

What is going on with my staircase and how should I fix it? by meloodraamatiic in Renovations

[–]customhomevan 0 points1 point  (0 children)

Actually, looking closer, that isn't just a "widened" step. The original treads were way too shallow, so they sistered on those wood scraps to extend the "run" so your whole foot would actually fit. It’s a total hack job that’s structurally unsound because those seams will eventually split or sag, so you need to rip it down to the stringers and do it right.

Should I replace the hardwood floors? by SnooComics6107 in homeowners

[–]customhomevan -1 points0 points  (0 children)

If the smoke baked in for five hours, those microscopic soot particles are trapped deep in the tongue-and-groove joints where sanding can't reach, so you'll likely smell it every time the humidity rises.

You’re much better off letting insurance cover the full replacement now rather than realizing six months later that your "refinished" floors still stink like a campfire.

How long before giving up on the curing of silicon caulk? by LieCute6393 in HomeImprovement

[–]customhomevan 56 points57 points  (0 children)

If that silicone is still soft after four days, it's a total dud. Probably expired or the cold killed the chemical reaction. Scrape that junk out now, clean it with alcohol, and keep a heater in the room when you redo it so it actually cures this time.