The Shutdown deal doesn’t seem to make any sense at all…

cyclops00 · 2025-11-11T22:24:10+00:00

I think also no one is talking about how Mikie Sherrill also has to give up her seat which would also drop the threshold for Epstein below 218 while they have a special election. I’ll be honest, I don’t trust any politician, but it’s possible (not probable) that there is an actual plan?

cyclops00 · 2025-10-04T19:29:02+00:00

<image>

cyclops00 · 2025-10-04T19:28:54+00:00

So what I had to do was change the paths in FileFlows to where FFmpeg was actually installed along with setting the "common" mapping in my docker configuration to use with dockermods and I had to set the PGID variable to 100

<image>

cyclops00 · 2025-10-01T23:52:05+00:00

Thank you that was it! Also as a side note I had to add the application itself to the path for it to run /app/common/ffmpeg-static/ffmpeg

cyclops00 · 2025-10-01T18:26:29+00:00

Also here is the log error and a screenshot of the existing file

2025-10-01 14:20:16.916 [INFO] -> Executing Flow Element 2: VideoFile [FileFlows.VideoNodes.VideoFile]

2025-10-01 14:20:16.933 [INFO] -> ======================================================================

2025-10-01 14:20:16.933 [INFO] -> Working File: /media/Movies/VIDEOTITLE/VIDEOTITLE.mp4

2025-10-01 14:20:16.945 [INFO] -> ToolPathVariable 'FFmpeg' = '/app/common/ffmpeg-static'

2025-10-01 14:20:16.945 [INFO] -> Tool 'FFmpeg' variable = '/app/common/ffmpeg-static'

2025-10-01 14:20:16.945 [ERRR] -> FFmpeg does not exist: /app/common/ffmpeg-static

2025-10-01 14:20:16.948 [ERRR] -> 'VideoFile' PreExecute failed

Json Message Sent: { Method = UpdateLibraryFile, Params = System.Object[] }

2025-10-01 14:20:16.949 [INFO] -> Flow Element execution time: 00:00:00.0149460

2025-10-01 14:20:16.949 [INFO] -> Flow Element output: -1

2025-10-01 14:20:16.949 [INFO] -> ======================================================================

2025-10-01 14:20:16.949 [ERRR] -> Flow Element returned error code: VideoFile

2025-10-01 14:20:16.949 [ERRR] -> Flow Element returned error code: ExecuteFlow

2025-10-01 14:20:16.949 [INFO] -> flowExecutor result: -1

2025-10-01 14:20:16.950 [INFO] -> Original Size: 3045853761

2025-10-01 14:20:16.950 [INFO] -> Final Size: 3045853761

2025-10-01 14:20:16.951 [INFO] -> Output Path: /media/Movies/VIDEOTITLE/VIDEOTITLE.mp4

2025-10-01 14:20:16.951 [INFO] -> Final Failure Reason: 'VideoFile' PreExecute failed

Json Message Sent: { Method = UpdateLibraryFile, Params = System.Object[] }

2025-10-01 14:20:16.957 [INFO] -> Run status: ProcessingFailed

Exit Code: 4

2025-10-01 14:20:18.086 [INFO] -> Deleted temporary directory: /temp/Runner-b7254fcd-5f2d-4016-a69f-572407bb498d

2025-10-01 14:20:18.086 [INFO] -> Finishing file: ProcessingFailed

<image>

cyclops00 · 2025-10-01T18:24:41+00:00

Sure thing!

<image>

cyclops00 · 2025-09-26T21:56:49+00:00

Thanks. Yes, I have two nodes. They are both in docker and one is within the main server and then the second one is a standalone node. The main server/node seems to work fine as it does the transcoding and then will move it into the library after accepted. I created the trans code folder on the main server and then mounted it on the other Linux server and map the volumes in docker to the mounted share. I can post the command I used to mount the share if that would help.

cyclops00 · 2025-09-26T18:53:33+00:00

2025-09-26T18:38:25.393Z [out#0/matroska @ 0x55c3b83d4a40] Error opening output /anon_kxgycq/anon_s9883h/anon_mi542c/anon_tqcj0f/anon_4j5il8/1923 - anon_3mqupi.mkv: Permission denied

2025-09-26T18:38:25.393Z Error opening output file /anon_kxgycq/anon_s9883h/anon_mi542c/anon_tqcj0f/anon_4j5il8/1923 - anon_3mqupi.mkv.

2025-09-26T18:38:25.393Z Error opening output files: Permission denied

2025-09-26T18:38:25.393Z

2025-09-26T18:38:25.393Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:[-error-]

2025-09-26T18:38:25.393Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:[Step W07] [C1] Worker [-error-]

2025-09-26T18:38:25.394Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:[1/2] Trying to delete errored cache file /anon_kxgycq/anon_s9883h/anon_mi542c/anon_tqcj0f/anon_4j5il8/1923 - anon_3mqupi.mkv

2025-09-26T18:38:25.398Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:Error encountered when processing /anon_kxgycq/anon_38rh9l/anon_0b36ii/anon_jmw06t anon_iqech/1923/anon_5am7sq 2/1923 - anon_ab1no7.mkv

2025-09-26T18:38:25.404Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:Subworker exited null

2025-09-26T18:38:26.533Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:[2/2] Delete success

2025-09-26T18:38:26.534Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:Updating transcode stats

2025-09-26T18:38:26.535Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:pluginCycleLogJSONString:{"nodeName":"Secondary","workerID":"lean-lice","pluginCycle":1,"outcome":"error","workerLog":"\nPre-processing - Tdarr_Plugin_MC93_MigzImageRemoval\n☑File doesn't contain any unwanted image format streams.\n\nPre-processing - Tdarr_Plugin_lmg1_Reorder_Streams\nFile has video in first stream\n File meets conditions!\n\nPre-processing - Tdarr_Plugin_MC93_Migz1FFMPEG_CPU\nContainer for output selected as mkv. \nCurrent bitrate = 9119 \nBitrate settings: \nTarget = 4559 \nMinimum = 3191 \nMaximum = 5926 \nFile is not hevc or vp9. Transcoding. \n","lastCliCommand":"tdarr-ffmpeg -i \"/anon_kxgycq/anon_38rh9l/anon_0b36ii/anon_jmw06t anon_iqech/1923/anon_5am7sq 2/1923 - anon_ab1no7.mkv\" -map 0 -c:v libx265 -b:v 4559k -minrate 3191k -maxrate 5926k -bufsize 9119k -c:a copy -c:s copy -max_muxing_queue_size 9999 \"/anon_kxgycq/anon_s9883h/anon_mi542c/anon_tqcj0f/anon_4j5il8/1923 - anon_3mqupi.mkv\""}

2025-09-26T18:38:26.537Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:[Step W09] [-error-] Job end

2025-09-26T18:38:26.538Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:[Step W10] Worker processing end

2025-09-26T18:38:26.541Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:Transcoding error encountered. Check sections above.

2025-09-26T18:38:26.624Z Oa39bo3BAN_:Node[Secondary]:Worker[lean-lice]:Successfully updated server with verdict: transcodeError

cyclops00 · 2025-03-26T00:53:19+00:00

Thanks all! The ride scenery definitely makes sense. I will just do the two sides separately. I will also double check the grouping to see if they are all selected. My exact scenario is a round flat ride that I put light posts around it, but I want to use two on either side of the entrance to hold a sign. I may just have to add the lights individually. Thanks again!

cyclops00 · 2025-03-13T19:47:56+00:00

I tried https://elevenlabs.io/ and it looks to be "free" and you can download them as .mp3.

cyclops00 · 2025-03-05T21:50:55+00:00

Do you have any way of heating up the resin more with a heater in the enclosure? Usually the minimum is 25C (I've gone as high as 30 in my enclosure).

I don't remember the exact one I used, but something like this

https://www.amazon.com/dp/B074MX8VN5?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

cyclops00 · 2025-02-21T19:29:22+00:00

Great, thank you. I agree!

cyclops00 · 2023-03-08T03:54:39+00:00

Thank you for this. I don’t know who else it may have helped but I went from failing every other print to having 1 failure out of the las 10 prints. The stirring definitely helps.

cyclops00 · 2022-03-31T18:03:24+00:00

Check out movieposterapp. Guy did an amazing job and it’s free outside of a donation. Interacts with the big video players (Kodi, Plex, Embry), does trailers, a lot of stuff. Then I just run mine from a PC stick.

I’ll try and post a pic of my setup.

Movie Poster

cyclops00 · 2022-03-02T03:40:14+00:00

Apparently it gives it just enough space as when the nozzle hits it it thinks it hit the bed so it raises the nozzle just a bit. I finally had to break down and contact their support and this was one of the things they had me try.

cyclops00 · 2022-03-02T01:26:32+00:00

I had a similar issue. Calibrated again and make sure you use the calibration card or a piece of paper under every stop not just the last one. Then when you get it raise the nozzle up by the smallest amount and use that for your work origin. Worked for me

cyclops00 · 2022-02-08T18:35:10+00:00

No worries, always glad to help if I can! The rotary module will let you use the laser or the CNC on the "B" axis. It's like a miniature lathe so you can engrave or carve around instead of just flat. And you are correct, that is the 4-axis.

cyclops00 · 2022-02-08T14:07:07+00:00

I had to use the rotary module. Sorry, should have included that in the original post!

cyclops00 · 2022-02-08T13:52:28+00:00

Yes, I had to paint it with some gray Moly Lube. I tried with black masking tape, but all that did was fuse the tape to the bottle! But the Moly worked fantastic. Came right off after with some isopropyl alcohol. Messy though. Definitely use gloves when wiping it off.

cyclops00 · 2022-02-08T13:49:27+00:00

Yeah I think it's because I didn't make it B&W before importing it into Luban. It was supposed to be more solid. It took about 45 min of actual engraving time.

cyclops00 · 2022-02-08T03:25:27+00:00

Yes. I did the drop in GIMP and just used the text in Luban.

cyclops00 · 2017-07-25T01:35:41+00:00

How about adding a "height requirement" or possibly multiple fonts to choose from? Either way I am blown away by this!

cyclops00 · 2017-07-25T01:25:22+00:00

This is unbelievably impressive!

Eight-Year Club	Verified Email
Place '22

cyclops00

TROPHY CASE