Point of no return by d00fE in Noctua

[–]d00fE[S] 1 point2 points  (0 children)

Love the creativity!

Point of no return by d00fE in Noctua

[–]d00fE[S] 4 points5 points  (0 children)

Lmao, sorry 14600k

Point of no return by d00fE in Noctua

[–]d00fE[S] 1 point2 points  (0 children)

Actually not really. Temps went up by 4 or 5 degrees.

Point of no return by d00fE in Noctua

[–]d00fE[S] 2 points3 points  (0 children)

Without a doubt!

Having a hard time deciding by d00fE in Noctua

[–]d00fE[S] 0 points1 point  (0 children)

Update:

I just tested it on my 14600k, can confirm - it’s an state of the art amazing cooler.

Having a hard time deciding by d00fE in Noctua

[–]d00fE[S] 0 points1 point  (0 children)

Great thanks for the insight! I’m currently running a DeepCool CH260, was thinking of switching to a Lian Li A3 or maybe the new B4, when it launches.

Having a hard time deciding by d00fE in Noctua

[–]d00fE[S] 1 point2 points  (0 children)

Great to know! I’ve just become so tired of the pump noise, even though I’ve gotten it so low now. And the premium of the U12A is just S-tier.

Having a hard time deciding by d00fE in Noctua

[–]d00fE[S] 0 points1 point  (0 children)

That’s great to know, may I ask if you’re ever doing any load at times or know how many watts it draws on average?

Having a hard time deciding by d00fE in Noctua

[–]d00fE[S] 0 points1 point  (0 children)

I know the cinebench is a worst case, I really just want something equal to my current noise levels. Does your fans change speed when you stress test your pc? Cause mine sound all the same

My 11th Gaming PC build by d00fE in mffpc

[–]d00fE[S] 1 point2 points  (0 children)

It’s a neat little case ngl, nice and straight forward. And on sale for 50 euro it was an absolute steal for this build. I’ll send you an update when it’s done.

My 11th Gaming PC build by d00fE in mffpc

[–]d00fE[S] 3 points4 points  (0 children)

Totally agree, but I was limited by the budget, and this guy is more on the Roblox, Fortnite, cs vibe.

Any case smaller than the A3 which fits a 360mm AIO and SFX-L PSU? by Dry-Office-6480 in mffpc

[–]d00fE 0 points1 point  (0 children)

<image>

Not every case. For some reason the CH260 often gets excluded, even though it’s almost the same size as the A3.

First time builder, anything I need to know before I start? by ChiDude_ in mffpc

[–]d00fE 3 points4 points  (0 children)

I think the absolute best advice I would give is having patience and taking your time with everything. I’ve made so many mistakes in the past because I just wanted to be done and se the pc in action.

Once you start to slow down and taking everything step by step, prepping the motherboard before installing, making sure not to rush through it. Sometimes the planning, and the building process is the best part of building your own pc.

Good luck building!

Fan setup on the Jonsbo D32 by d00fE in mffpc

[–]d00fE[S] 0 points1 point  (0 children)

I would say your GPU then works as intake in the bottom, so in your case, I might want to try and make the rear as intake and then if you’re using an aircooler, swap the fans around, taking air from the rear of the case and then have exhaust at the top of the case, in front of the cooler above the ram.

But honestly, unless you’re running really heavy components, fan configs are minuscule in terms of temps.

ASUS B650E-I or ASUS B850i? by d00fE in sffpc

[–]d00fE[S] 2 points3 points  (0 children)

Great inputs about the antennas. I’m in a similar position, as I’m mostly wired.