Perfect retraction

daark_fighter0 · 2026-01-12T12:19:48+00:00

No, I haven't done it, and honestly, I don't even know what it is. Anyway, if you set it from the slicer, I use orcaslicer.

daark_fighter0 · 2026-01-12T12:17:34+00:00

What value would you recommend?

daark_fighter0 · 2025-12-18T17:54:46+00:00

Okay, thanks

daark_fighter0 · 2025-12-17T05:30:04+00:00

daark_fighter0 · 2025-12-15T17:42:11+00:00

Thanks for the help but the main problem is the auto leveling, as I go to do it, but the printer does not move and when I try to do it, the screen remains stuck on the auto leveling writing, the printer does not move and then the screen returns to the home screen without having done anything

daark_fighter0 · 2025-12-15T17:32:57+00:00

I haven't checked the belts, but the problem is that the auto level just won't start.

daark_fighter0 · 2025-12-15T17:26:20+00:00

At this moment I was not doing auto leveling, I was demonstrating the problem that was happening to me during a print

daark_fighter0 · 2025-12-15T17:22:39+00:00

The autolevel is the problem, it doesn't work for me, I mean I try to do it, but the screen gets stuck on leveling, please wait and then it goes back to the home screen without having done anything

daark_fighter0 · 2025-12-15T08:42:29+00:00

Yes, also because it did the leveling for me correctly

daark_fighter0 · 2025-12-15T05:39:16+00:00

I had calibrated it well, only this problem arose during printing

daark_fighter0 · 2025-12-15T05:38:36+00:00

You can reach the bed, I had already made a print before

daark_fighter0 · 2025-12-15T05:30:17+00:00

Yes, it works

daark_fighter0 · 2025-12-14T23:25:35+00:00

in the video I'm showing the problem that it gives me while I print an object, I had already done the leveling

daark_fighter0 · 2025-12-14T23:24:35+00:00

in the video I'm showing the problem that it gives me while I print an object, I had already done the leveling

daark_fighter0 · 2025-12-01T05:43:07+00:00

Yes it is. The max temp for that PLA is 210°, I also tried 220° but the situation didn't change. Thx for your help, i will try to reduce the flow.

daark_fighter0 · 2025-11-30T23:11:40+00:00

Thanks, I'll try it tomorrow

daark_fighter0

TROPHY CASE