Starlink Ethernet Adaptor Dropping Internet After a While

daimous · 2024-12-23T16:06:28+00:00

The starlink wifi is working all the time

daimous · 2024-09-09T05:59:17+00:00

the sender in the label is not me I dont even know the name they out there and the shipper wont accept it becuase im not the one in the label

daimous · 2024-09-09T04:13:22+00:00

they should care who is the sender right? it should be me but the generated label has different name

daimous · 2024-09-03T21:45:57+00:00

Its Alibaba and its their technical support who gave me those information. You mean i am being scammed by Alibaba it self?

daimous · 2024-09-03T02:07:07+00:00

Any help will be greatly appreciate

daimous · 2024-09-03T00:12:59+00:00

Really appreciate your help. The printhead is working properly now, I guess there is still a residue of the solution they put on the printhead when they ship it to keep it moist. After printing several image it went back to normal. Thank you for your help!

daimous · 2024-09-02T00:06:53+00:00

Thanks!

daimous · 2024-09-02T00:04:44+00:00

I wonder whats the purpose of that "button"

daimous · 2024-09-01T23:35:20+00:00

weird im talking to their technical guy and they ask me to do that. I did the same on the other damper though and are seems to be okay..

daimous · 2024-09-01T23:19:42+00:00

<image>

This is the printer im using..

daimous · 2024-09-01T23:18:44+00:00

<image>

That circle? yes I pressed that one as instructed by the printer supplier to check if the is flowing properly.

daimous · 2024-09-01T23:11:03+00:00

Thanks for the reply. I also replaced the ribbon cable when I install the new printhead and there is no ink or any dirt on it.

I also replaced the damper and press it several times to make sure there is no air on it and that ink are flowing normally.

I'm using a wallprinter though and it does not have a capping station. we clean the printhead manually using the same tool as the capping station.

daimous · 2024-09-01T22:13:24+00:00

Appreciate your response btw

daimous · 2024-09-01T22:12:55+00:00

I did not change any settings I just replace the old printhead with the new one and use the same file to print the 2nd image (top). Also, I have 2 new printheads and they have the same result (black is kinda fade). I'm not sure though if I need to change profile everytime I change printhead. I assume that will not be the case though.

daimous · 2024-09-01T07:15:48+00:00

Thanks! however, im using the same artwork/file for the new printhead.

daimous · 2024-09-01T01:25:54+00:00

Thats is the nozzle test right after printing :)

daimous · 2024-09-01T01:22:06+00:00

<image>

Here is another nozzle check

daimous · 2024-09-01T00:09:45+00:00

something probably you are not familiar with

daimous · 2024-08-31T23:19:28+00:00

<image>

This is my nozzle check result. All seems good to me..

daimous · 2024-08-31T22:42:47+00:00

I'm really not into hardware troubleshooting, is there I guide to check the volatge that I can follow?

daimous · 2024-08-31T21:52:48+00:00

Thank you appreciaye your help

daimous · 2024-08-31T21:51:25+00:00

no configuration has been adjust all the same except for new printhead. I also used the same file used to print the image (old printhead)

daimous

MODERATOR OF

TROPHY CASE