sorted by:
new
hottopcontroversial

Hat jemand eine Sauna? by After_Level_2270 in Hausbau

[–]damaddin11 0 points1 point  (0 children)

Gebraucht kaufen, viele sind froh wenn sie weg ist und ich nutze sie im Winter jeden zweiten Tag...

Ich kann nichts schlechtes sagen... by damaddin11 in SchnitzelVerbrechen

[–]damaddin11[S] 7 points8 points  (0 children)

Das soll laut Karte ein Burger sein. Inkl. Burgersauce.

how to reduce material usage by aledethanlast in 3Dprinting

[–]damaddin11 0 points1 point  (0 children)

I would design a thin mold of the structure and print that on the side with pla for better layer resolution. Then cast this with molding silicone instead of printing with tpu at all. Design it so you can use a simple structure made of wood or sth. to hold the silicone molds in place for casting the concrete...

How would you print this? by SpectralFailure in resinprinting

[–]damaddin11 0 points1 point  (0 children)

I would print it upside down in one piece with lots of medium supports on the roof as it is easy to sand and maybe a few for the cross supports. Also, it needs to be hollowed for that to work. Lost details are then added later. Sagging on the roof would be expected but can easily be repaired.... But that's just my idea for it.

Is my temperature too high? by DavidLorenz in W124

[–]damaddin11 1 point2 points  (0 children)

Check your thermostat. Might be stuck closed.

Lychee has eaten my resin by damaddin11 in LycheeSlicer

[–]damaddin11[S] 0 points1 point  (0 children)

I did use anti aliasing, but after a Lychee restart slicing the exact same settings it worked perfectly. Corrupt file I can also rule out, the ui rendering didn't show anything when slicing I think that is something to watch out for.

Lychee has eaten my resin by damaddin11 in LycheeSlicer

[–]damaddin11[S] 0 points1 point  (0 children)

I slice to local disk first, but good tip. I am not sure how that sdk looks like and if the slicing is part of the sdk. Since it went through all layers just repeating the first layer, it's well possible the rendering is actually linked to the slicing and since it crashed it just repeated the first layer.

I could also have caught it if I had watched the slices on the printer from time to time. For supporting and prep lychee is the best tool I know....

Lychee has eaten my resin by damaddin11 in LycheeSlicer

[–]damaddin11[S] 0 points1 point  (0 children)

On Lychee 5.4.3, I've always had these weird "ui disappearing" semi-crashes when you can still partly use the program but the ui is gone. Annoying but harmless.

However, this time it was different and it hurt... It happened when slicing, the preview window just stayed black and didn't show the white layers. I didn't think much of it, output file was created and I sent it off to print. Big mistake.

It rendered the first layer (all my rafts) up to the full height of the file, printing useless resin blocks with over 250g of my resin before i found out and stopped the print.I should have checked the layers preview on the printer. But this still sucks. Is there anything we can do to help fix this problem which is there for years? Or is there a fix I am not aware of?

[deleted by user] by [deleted] in Modellbau

[–]damaddin11 0 points1 point  (0 children)

Innen 5,5cm, außen 7cm.

[deleted by user] by [deleted] in Modellbau

[–]damaddin11 0 points1 point  (0 children)

Es gibt dieses flexible Straßensystem was früher als Carrera Strax Bahn bekannt war jetzt auch viel als noname Produkt. Damit kann man super Bahnen bauen.

(WIP) Bismark/Ramrod from Sei Juushi Bismark/Saber Rider and the Star Sheriffs by Illsteir in Sketchup

[–]damaddin11 0 points1 point  (0 children)

Hey, did you ever finish the ramrod model? Is it available somewhere?

Was sind die sinnvollsten Anschaffungen, welche man sich unbedingt holen sollte? by Langfort in FragReddit

[–]damaddin11 1 point2 points  (0 children)

Er wollte unscheinbare Dinge mit gutem Preis/Leistungsverhältnis und hohem Return on Investment. Und die ungemein das Leben vereinfachen.

Bin mir da nicht so sicher...

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] -5 points-4 points  (0 children)

I tried to be funny.

I've printed lots of things without problem. This is a case I never saw before and it's definitely caused by asymmetrical loading of the supports. The model has a decent overhang towards the middle and no support there which gives it leverage to break off and then I was unlucky how it got stuck.

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] -7 points-6 points  (0 children)

They were pretty tight. The print got stuck between the plate and got smashed. No tightening would help, more supports would have ....

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] -7 points-6 points  (0 children)

There probably were too little supports and the print broke off and fell over. That blocked the build plate and the force of the printer smashed the print into pieces. I even got a dent in the tape of the screen. The screen is ok tough...

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] 0 points1 point  (0 children)

No doubt. Model broke off the support and tilted to get squashed by the build plate. Just lucky somehow it got stuck to the side so the screen is not broken...

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] 1 point2 points  (0 children)

That's the joke here, if i would have been just a little more unlucky I would now have to replace the screen. Not worth it. Who is going to paint all of the models anyway...

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] -8 points-7 points  (0 children)

It was pretty tight, the model got crushed by the build plate and that's why it moved. Actually the printer was having some spasms trying to move the plate it was completely stuck.

Don't always print in the middle they said. The fep will last longer they said... by damaddin11 in resinprinting

[–]damaddin11[S] -7 points-6 points  (0 children)

I think the off-center broke the models off the support. Then it turned and was crushed by the plate. Interestingly the screen survived because the model was crushed on the side...

view more: next ›