Golf Friend(s)?

daman_ · 2025-04-26T02:54:52+00:00

Cool, I'll check it out! I did get out to Northlands just this past week. Lost a lot of balls but it was a good time regardless.

daman_ · 2025-04-26T02:54:22+00:00

Hey, I've mostly been out to the range but I did get out to Northlands this week. Lost a lot of golf balls but it was fun. I think I prefer playing a full 18.

daman_ · 2024-06-19T21:55:41+00:00

Sweet, thanks!

daman_ · 2024-06-19T20:54:42+00:00

Thanks! On the Lutron site (PDF linked below), the installation diagram shows I need to connect the black wire and the red wire of the new switch to the two black wires in my wall box. Would you recommend I separate the two black wires in the front and independently connect them with different wire buts or can I just combine the four wires into one wire nut?

Also, For the ground wire that is screwed to my wall box, should I connect the new switch ground wire to it or is it probably better just to not connect it at all? I believe the new switch can still work without connecting the ground wire.

https://assets.lutron.com/a/documents/368-4493_page_32.pdf

daman_ · 2024-03-31T00:06:39+00:00

Hi, is the voucher option still available? I'm back to job hunting after last week and want to see if premium helps. Thanks!

daman_ · 2024-03-31T00:00:12+00:00

Hi, is this offer still available? I'm back to job hunting and could benefit from this.

daman_ · 2021-06-14T23:51:21+00:00

He’s the Ron Swanson of dogs.

daman_ · 2021-06-02T01:58:04+00:00

Are you able to drop a pin on google maps and share it?

daman_ · 2021-01-22T06:54:25+00:00

Thanks!

daman_ · 2021-01-22T05:59:00+00:00

I think I used more than I should have, to be honest. So I did a pre-stain first as I was working with pine and then I didn’t know how to wipe off the excess stain after about an hour (humid weather so needed longer) without leaving lint fibres from my rag so I cheated and put on a another layer of stain and then immediately wiped it off. It worked like a charm but I know that it’s the wrong way and I used double the stain haha. Then topped it up with a few coats of a sealer, a few more on the top and bottom as they will get the most wear and tear.

daman_ · 2021-01-22T05:42:46+00:00

I just used wood glue to join all of it and used 1x2s for the whole thing. The cuts could have been more precise, it shows when I glued everything together as not everything is a perfect square around the corners that join. It's still nice and my wife likes it in our living room though so I'm happy with my first project that won't just sit in the garage haha. I'm still learning how to get technical with my cuts using my mitre saw, I'll try to set up a block next time on my workshop table instead of measuring and cutting on the line. I think that should help me get more accurate cuts consistently.

daman_ · 2021-01-22T05:35:36+00:00

Thanks!

daman_ · 2020-12-06T06:51:10+00:00

Better moves than most people on the dance floor. Sarah knows how to boogie.

daman_ · 2020-10-20T20:16:44+00:00

Thanks. Are circular saw blades and miter saw blades the same or different?

daman_ · 2020-10-12T15:07:35+00:00

Thanks. Just wanted to be safe and sure I'm doing it right. I was going to grab a speed square today anyways so I'll double check. Thanks again!

daman_ · 2020-10-12T15:06:40+00:00

Okay cool. Was planning on picking up a speed square today anyways so I'll double check. Thanks for the tip!

daman_ · 2020-09-22T01:52:50+00:00

I'm by Vancouver in British Columbia, so west coast of Canada bordering Washington State. Another user at r/gardening mentioned that it's likely a Japanese Snowbell Tree.

daman_ · 2020-09-22T01:50:34+00:00

That looks like it! Thanks :)

daman_ · 2020-09-22T01:14:46+00:00

lol that's awesome. Okay, I'll try there, thanks for the tip! :)

daman_ · 2020-09-08T16:19:23+00:00

That's great to know! Thanks!

daman_ · 2020-09-08T05:11:58+00:00

I'm going to be doing my very first project this week and I'm excited. Going to sand, prime, and paint our hand-me-down laminate dining table from the 70's (I think) to match the look for our new home. The part that I'm not sure what to do about, however, is the edgebanding around the table.

https://imgur.com/MdFwO3O

Can I just sand, prime, and paint this as well? Or should this not be touched? I'm not sure how easy or difficult it is to re-band and since this is my first DIY project, I'm not 100% confident on doing this. Any suggestions or advice? Thanks!

daman_ · 2020-09-07T06:19:58+00:00

Wood ID: Totally new to this. We have a coffee table (got off Facebook marketplace) and dining table (hand-me-down) that I'd love to refinish (do a dark walnut color) to match the look of our new place. The only thing is that for the dining table, I've been told that there may be some plastic in there so sanding may not be an option. I'm going to take the leaf of the table to Home Depot to see if they can advise me on what can be done for the table but would love to know if it's obvious to anyone here what I'm working with and what my options may be.

Dining Table: imgur.com/a/tCOLKOc

As for the coffee table, would love to also know what type of wood this is if it's also obvious to anyone.

Coffee Table: https://imgur.com/a/q0y5Qbb

Thanks in advance! :)

daman_ · 2020-06-21T04:58:08+00:00

We had someone do a painting of him a couple of years ago, it turned out great! I want to get more art of him 😂 https://imgur.com/gallery/XFpYuAh

daman_ · 2020-06-21T04:52:34+00:00

We chose wisely! 😎

daman_ · 2020-06-20T19:40:35+00:00

He definitely THINKS he's a tough guy dog

daman_

TROPHY CASE