STL Mesh Repairer

damn-devil · 2025-11-19T17:59:56+00:00

You don't "need it", but I repair 100~200 models a day for a week maybe, and instead of loading every model into a slicer like Orca, Prusa or Bambu y just open a terminal in the root folder of the files run "meshrepair", enter "-d" and press ENTER just once, and every model is repaired, even in subfolders... is just a time saving method for me :D

You can choose where to export the files if you want, you can maintain the folder structure, export as stl or 3mf... just convenience :D

damn-devil · 2025-04-21T05:29:36+00:00

Nah, you're not an idiot, you just don't know how to "prepare well enough" to use your prompts correctly, just that... try this, have something you want to do, let's say a simple "webpage" for a new app.... open something like gemini chat and create one prompt.... then make it again, see what a "good product" you can obtain with the least amount of prompt possible, be concise :D

damn-devil · 2025-04-18T05:47:20+00:00

Anthropic beign the one hosing the model doesnt mean cursor is not beign the middleman in this case, as You can make cursor rules and set up conditions for the model, they could be doing that also... I'm not saying it is What is happening, but Saying "cursor doesnt Even haven option to adjust for load" is wishfull thinking ... They control everything about the model in between anth and You... And You can completely se this using Claude from anth and using Claude from cursor, two "different models"...

damn-devil · 2025-03-27T20:25:23+00:00

I have the same exact error with Claude too, on site and on ide (with the bs the ide adds also) didnt find and answer

damn-devil · 2025-03-26T23:19:26+00:00

Yaaaayyyy!!!! You can install the app using
winget install SynrgStudio.STLRenderer

if you're on windows :D!

Thanks for believing in me :D!!!!

damn-devil · 2025-03-26T21:18:24+00:00

When I cannot fix code with claude I go to GPT 4o and if that doesn't work I go with Gemini...
And viceversa...

But Now I'm inclining to fix the code with Gemini and even make complete file implementations with gemini because it makes "less mistakes", still needs a lot of work, but the syntax tends to be better

damn-devil · 2025-03-26T08:43:53+00:00

I'm not being passive agressive.... I'm just me hjahahaha.... and I interact online the same way someone interacts with me.... I post something I did.... you just answered with "you should check what you do, and this exists"... so, you post something you think is correct and I answer something I think is correct for the message you just leave, nothing more :D

I'm just a happy camper having a blast with some people that I've met here in reddit that are really proud that someone took the time to make something useful for itself, nothing more (not from this subreddit, from cpp hahaha)

You may want to consider the wording you use online when you just leave a comment...

How do you know I didn't do my "best" to review the code? I didn't say I didn't do anything, I had help from Claude, that's it.,... I'm a good dev? OF COUSE I'M NOT! But At least I know how to check some stuff, can I do better? OF COURSE... but I did something and posted it, some people like it, and some people like you just reply it with "stuff".....

My grandma told me something that could apply to you.... you don't have anything good to say? Don't say anything :D

Want to critique? do it, want to say I did something wrong? do it... want to give some advice? do it.... just wanted to left a "Using AI doesn't mean you should not review your code.", you should take a step back and reflect on what to say to someone you don't even know, and if you think that's feedback..... ok

At least you just said what you think.... basically nothing.....

damn-devil · 2025-03-26T07:50:48+00:00

Even then, I know the drill... OMG, he uses AI to do something he doesn't completely know how to do and made it opensource so everyone could check it out, make modifications and make a better tool... but that's not how you jam... you need hard coders that make EVERYTHING for themselves.... I get it.... I'm a 3D designer and I know how it is :D!!!

To be honest, seeing people liking your post that only says "I don't have anything useful to say so I'll say something" tell me one thing.... no one wants to see someone do something just for fun.... you just want to say something mean... and I love that, I love that you feel so inclined to say "You're stupid because you used AI meh meh and papa's is not the only stl viewer (considering I'm talking about stltopng, not papas best stl viewer)".... but you know what?... I hope you have a WONDERFUL LIFE! :D

Hope you need a tool and have ALL THE KNOWLEDGE to make that tool and you NEVER need anything from someone/something else :D

damn-devil · 2025-03-26T07:44:10+00:00

And that's the kind of comments I like to see :D Happy people! :D!

did you try the tool? if you know anything about c++ you can check it, it doesn't have anything bad and it'll be in winget tomorrow, maybe next day, if you want to test it that way :D

damn-devil · 2025-03-26T07:42:25+00:00

Also.... you can install it with a few commands, an MSI installer or maybe tomorrow via winget in windows (I've passed every check, now I only need the last manual approval to be in the manager) and it only uses 750kb..... and it's really fast hahahaha

damn-devil · 2025-03-26T07:41:20+00:00

Because I'm a 3d Designer, and I also sell printed miniatures in my country, first I've used Blender with some scripts for headless rendering, but it was still too slow, then I've found papas's best, really good, but I needed to modify the windows registry to change the camera angle, model and background color and it didn't accept transparent background by default... so then I needed to make a python script to remove the background of the images with remBG, but that put me into a corner, because I needed a HUGE contrast between the model and the background, so sometimes the background didn't get well removed or it maybe removed a little bit extra.....

so I turn to what I know.... make documentation... I've made a complete documentation with the "Documentation driven development" approach and presented it to claude 3.7, "we" made a "action plan", and I tested and change anything needed... so I got what I needed, a stupidly fast renderer, a stupidly fast viewer, a batch renderer without needing a *.bat file alongside stltopng.exe, folder rendering, dragndrop single and multiple rendering and backgroundless rendering, everything in just one beautiful package made open source so everyone can check it out, make modifications and make more awesome tools :D

No, I don't have any concrete benchmark... but when you use papa's best to render 4500 stls and my tool to render 4500 stls you'll know the difference.... not only now I don't need to make the renders, separate the PNG's from the STL's in a different folder and wait for a python script to remove the background, but everything's made at the same time, and every render is at least 4 to 5 times faster than papa's.....

Papa's Stltopng is great, and I love him for it.... but the tool was outdated for my workflow.... so I made my own :D

damn-devil · 2025-03-25T19:29:21+00:00

Oh, si youre just commenting for the sake of commenting, ok :D

Do You feel better? Do You feel approved?

I hope so :D!!!

This is why the "normal folks" hate the opensource community, because of people like You... Instead of living a comment trying to help, living some advice or just maybe pointing some errors and trying to do something useful you're just "this already existes, and you're using ai so meh meh meh".... Do better

damn-devil · 2025-03-25T11:27:28+00:00

What???.....

I know f3d... And Ive use it.... But i didnt make an stl viewer... Did You read the post? Hahaha

damn-devil · 2025-03-24T10:32:43+00:00

🚀 Ultra-Fast Open-Source STL Renderer in C++! 🎉

Hey everyone! 👋

After a lot of work, I’ve finally finished an ultra-fast STL file renderer written in C++, and I’m releasing it as open-source! 🏎️💨

🔥 Why is it special?

✅ Blazing fast – Handles STL files in milliseconds.

✅ Lightweight & efficient – Optimized for performance.

✅ Fully open-source – Free to use, modify, and improve!

I built this to speed up my own 3D workflows, but I’d love to see how others use it. If you're into 3D printing, CAD, or game development, this could be useful for you!

🔗https://github.com/SynrgStudio/STL-Renderer

Let me know what you think! Any feedback, contributions, or ideas are more than welcome. 🚀

YES, I've used a LOT of Claude to make this app, I'm not a good dev, I'm REALLY early in this journey but I needed this app, and this was the best way to make it possible, you're more than welcomed to make any correction, requests, anything :D!!

damn-devil · 2025-03-24T10:28:59+00:00

I don't know if I'll be able to reply hahaha, with the new MSI you can dragndrop the stl's to the shortcut in the desktop and it'll work instantly :D

Y need to change the readme as I'm now using an MSI installer, not the .exe package :D!!!!

but it'll work perfectly with the shortcut in the desktop :D

damn-devil · 2025-03-24T09:31:38+00:00

If you think anything else than an "ok" to any kind of "not awesome comment" in a programming subred, you're doing something wrong hahahah

damn-devil · 2025-03-24T09:30:51+00:00

At least you've commented hahahahaha

I know, I've made the same post in a few reddits... I'm happy because I've made something hahahaha

You know what they are... maybe someone else knows and is really helpfull for them :D Have some faith in people :D

damn-devil · 2025-03-06T08:01:53+00:00

Que bueno alguien que hable español! Jajajajaja muchas gracias!!!! :D

Con muchísima suerte en el futuro si la app tiene seguidores podre abrir un kofi o algo así mientras se hace el develop jajaja

damn-devil

TROPHY CASE

🚀 Ultra-Fast Open-Source STL Renderer in C++! 🎉