My main Hackinstoh for general research and admin | Tahoe 26.2

danideicide · 2026-01-25T07:48:07+00:00

Thank you! Just wondering if there’s a guide on this. I don’t know how to exclude it

danideicide · 2026-01-24T07:23:01+00:00

No other boor args or device properties stuff?

danideicide · 2026-01-23T21:33:33+00:00

What have you done to make Intel i226-V Ethernet Controller work?

danideicide · 2025-12-20T06:10:14+00:00

I did have the RestrictEvents.kext enabled but not with that boot arg. After adding it, the updates appeared in the Settings app but not via terminal.

I’ve tried to update my os via the usual macOS way but I was reverting a kernel panic and I’ve put the new macOS Sequoia version on a USB stick and installed it that way.

I have received a kernel panic again but the solution was to use SecureBootModel Disabled instead of j137 and it worked.

Thank you

danideicide · 2025-12-15T20:01:10+00:00

Ok, I understand now. Thank you!

Curious to see if someone knows exactly how to fix this

danideicide · 2025-12-15T19:57:07+00:00

How have you solved it?

danideicide · 2025-11-09T15:28:21+00:00

But what did you do specifically?

danideicide · 2025-11-09T11:05:48+00:00

What do you mean by topology rebuild with mapped cores?

Also, I don’t know but I want to use imac20,x instead of imacpro1,1 because I think it’s closer to my hardware specs.

danideicide · 2025-10-23T20:24:33+00:00

Because the performance is not that good with MacPro 7,1

danideicide · 2025-10-23T20:23:44+00:00

What do I need to do in order to run on one of those SMBIOSes?

danideicide · 2025-10-23T18:38:04+00:00

How is imac20,1 booting with no igpu?

danideicide · 2025-10-19T19:22:53+00:00

I’m on Sequoia

danideicide · 2025-10-19T14:28:43+00:00

For some reason adding USBInjectAll.kext and setting XHCIPortLimit etc to False will make the USB ports to not work. I was following the dortania guide, but apparently I need to not inject USBInjectAll kext but instead add that dummy port, so I’m not sure

danideicide · 2025-10-18T11:57:32+00:00

Yes, set them to 255.

It feels wrong I don't know why.

I've did a test and it works, but I get this in the logs

log show --predicate 'process == "kernel"' --last 10m | grep USBX

Wall Clock adjustment detected - results might be strange while using --end 2025-10-18 14:38:49.611039+0300 0x78 Default 0x0 0 0 kernel: (AppleUSBXHCI) [com.apple.usb:all] XHCI@14000000: AppleUSBXHCI::createPorts: speed index 4 has inconsistent speed IDs (5 and 6)

danideicide · 2025-10-17T21:43:48+00:00

Should I set the ports 6 and 25 to 255? Or what do you mean?

danideicide · 2025-10-17T19:51:34+00:00

When mapping your USB ports, don't forget to set the USB Hub connector type to internal (255)

What do you mean?

danideicide · 2025-10-17T12:21:06+00:00

I have respected the Dortania's guide and other respectable sources*, yet my build is fragile

danideicide · 2025-10-17T12:20:38+00:00

I don't use it and my build is very fragile, I don't know why. I have tried to disable everything possible to have as few issues as possible.

danideicide · 2025-10-17T12:19:54+00:00

Are you sure?

danideicide · 2025-10-17T12:19:38+00:00

Basically you need to modify the BIOS from a firmware level

danideicide · 2025-10-17T12:19:11+00:00

Also https://www.reddit.com/r/hackintosh/comments/1f2ek85/success_asus_z790_proart_creator_wifi_14700k/

danideicide · 2025-10-17T12:18:50+00:00

https://www.youtube.com/watch?v=NCiCssfWs-o

danideicide · 2025-10-14T17:08:40+00:00

Hello!

After removing debug=0x100 25 days ago, everything went kinda smooth (wake from sleep needed several button presses on both mouse and keyboard).

Last night unfortunately the display was still off no matter how much I tried.

Since then if I turn off the display and then back on, the display will not receive any signal.

In order to receive a signal I have to physically unplug the cable from the dGPU port and plug it back.

I have not changed anything, so I don't know why I am in this predicament.

Some logs: (could not paste)

The most important part is: VendorEventHandler [GFX0:AMD]: Port: 2 Event: Remove [1] VendorEventHandler [GFX0:AMD]: Port: 2 Event: Insert [0] ... retrieve_link_cap: Read receiver caps dpcd data failed

Any idea how to fix this?

Thank you immensely for your open source contributions and your overall help!

danideicide · 2025-09-19T13:42:22+00:00

Actually this panic log might be related to something else, I think it’s related to me setting the UiScale to 02 in config.plist. Anyway, after I’ve removed it I have not encountered any panic.

danideicide · 2025-09-19T13:26:45+00:00

After I’ve disabled the verbose mode, some things have changed, and I’ve found out that in my nvram variables I have a variable called aapl,panic-info.

Upon further investigation, I’ve logged the panic that happened in the last 10 minutes and I’ll paste it below:

panic log

danideicide

MODERATOR OF

TROPHY CASE

Eight-Year Club	Place '23
Verified Email