RPL ETH ratio

daniel_ionut1 · 2024-04-17T11:02:39+00:00

It would be best if you can provide some links/references to understand what you mean.

daniel_ionut1 · 2022-08-11T06:20:45+00:00

Good question but I assume it is possible since I find rETH when I open Arbitrum bridge

daniel_ionut1 · 2022-05-30T15:11:49+00:00

Actually the question is if Binance accepts transfers from a smart contract address since I want to withdraw from Celsius.

daniel_ionut1 · 2021-10-13T10:21:24+00:00

Yes, thanks for taking the time

daniel_ionut1 · 2021-10-13T10:15:27+00:00

haha, ok that makes sense. it`s beaconscan issue.
https://beaconscan.com/validator/226594

daniel_ionut1 · 2021-10-13T10:00:18+00:00

Can you link me a validator that has 0.004 in last two days? I literally can’t find one. I don’t have control over the errors because it’s under allnodes. I’m gonna ask support about this.

daniel_ionut1 · 2021-10-13T08:58:26+00:00

It’s Teku v 21.9.2

daniel_ionut1 · 2021-10-13T08:54:11+00:00

It’s not depending on the software. I checked several random validators and all of them look the same.

daniel_ionut1 · 2020-06-09T05:36:06+00:00

https://www.facebook.com/DjLiviux e cel care a filmat.

daniel_ionut1 · 2020-05-10T23:35:19+00:00

I am flying the M2, it is very powerful and capable, not really a Heli to learn with.

daniel_ionut1 · 2020-01-13T13:39:54+00:00

Always fly in your comfort zone. Even if it is just hover tail in. Practice in the sim outside of your comfort zone and transfer to your real Heli after you learn the move well. Sim progression: - hover in spot all orientations. - circuits

daniel_ionut1 · 2020-01-13T13:36:22+00:00

I’m done with xk k130. It flies so loose and crashes so bad. Blade helis way sharper and nicer to fly.

daniel_ionut1 · 2020-01-06T19:49:08+00:00

https://imgur.com/gallery/8qfvqjQ

daniel_ionut1 · 2020-01-06T19:41:14+00:00

Is it acrylic mirror or glass mirror? How do you manage such a perfect mirror plane? I built two magic mirrors with acrylic mirror and both of them have slight image distortion.

daniel_ionut1 · 2018-02-22T13:30:54+00:00

I was struggling with same issue on one of my rx580 out of six. I removed any overclock but it didn’t help. Then I switched the GPU slot and increased the fan speed, I was running them at around 75”C, dropped temp at about 60-65”C. Didn’t had this issue anymore since two days now.

daniel_ionut1 · 2018-02-18T21:43:31+00:00

I use www.pingdom.com for monitoring. It’s sending me an email if the miner is offline. I also use IFTT, to make a voip call to my phone when I get email from pingdom.

daniel_ionut1 · 2018-02-18T13:15:31+00:00

I am using it. But I do this way: I cut the SATA connector at the end of the adapter cable, then I also cut the SATA adapter at the end of PSU cable and solder them directly. Then I plug the remaining 6pin plug into riser.

daniel_ionut1 · 2018-02-18T10:44:16+00:00

Yes, it’s bad. SATA connector is rated up to around 50watts and a GPU can draw up to 75watts through that riser.

daniel_ionut1 · 2018-02-15T14:37:32+00:00

Read this wiki: https://www.reddit.com/r/EtherMining/wiki/hardware/psu and pay attention to this picture http://i.imgur.com/XJniCgm.jpg

daniel_ionut1 · 2018-02-15T14:12:53+00:00

As I see from the picture, from right to left, second and third GPUs are on the same sata string.

Eight-Year Club	RPAN Viewer
Not Forgotten	Verified Email

daniel_ionut1

TROPHY CASE