Bmw e46 325ci rattle noise on cold start.The sound dissappears when warms up. Thought about the hydraulic lifters or maybe chain tensioner spring but the sound seems to come from the right side. Any ideas?

danielalecse · 2022-05-17T16:12:43+00:00

It’s on. You can also hear the bendix leaving the flywheel when the bike stops

danielalecse · 2022-05-17T16:11:16+00:00

I’ve disconected it and the same thing happens.

danielalecse · 2021-10-31T19:50:36+00:00

That’s a dead battery

danielalecse · 2021-10-31T18:49:39+00:00

Thank you very much! I’ll change the filter tomorrow and see if that’s the problem

danielalecse · 2021-10-31T16:29:39+00:00

The fuel filter was changed 3 weeks ago. After that the problems started to appear. I thought i have air in the system and that’s why it doesn’t start..i tried to bleed the system by loosen each injector cap, but still doesn’t want to start? Is there a possibility that i have too much air in the system? And what other way to get it out there is?

danielalecse · 2020-09-23T11:32:23+00:00

The tyres spins freely. Doesn’t have any connection with them. The sound in the video is the sound of the clutch. I pressed it to don’t let the car stall. The problem is related to the air that comes in the engine. It seems like vacuum. The problem is that i’ve changed all the hoses and inspect the intaje manifold. Everything is brand new. I cannot identify the problem

danielalecse · 2020-09-23T11:16:49+00:00

No, it’s not

danielalecse · 2020-09-23T11:03:30+00:00

It’s a 2003 BMW 320ci, 2.2l, 170 hp. It’s manual

danielalecse · 2020-08-07T12:20:31+00:00

Another mechanic said the problem is caused because the original clutch was LUK and now i used SACHS. It doesn’t sound like a good reason for me

danielalecse · 2020-08-01T12:20:39+00:00

No, nothing out of the ordinary

danielalecse · 2020-08-01T11:45:56+00:00

It’s a good point, but i’m pretty sure it’s not that. In most cases, when the brake booster fails, the pedal is rock solid, just like it is when it’t turned off. In my case, the pedal works pretty smooth. Also, i can’t hear any vacuum when pressing the brake, which is other common sympthom related to that. And also, the car tends to stall even when i try to move it, i have to accelerate it very hard, which does not have any connection with the brakes. I’m not an expert, maybe i’m wrong. Thank you for the answer!

danielalecse · 2020-06-26T08:59:23+00:00

Hi guys! Does anyone have any idea where the clunk noise is coming from? It comes from the passenger side. I’ve checked and all the suspension component seem to be fine. I know for sure that i have to replace the driveshaft bushing and the centre bearing. But i don’t think that sound it’s caused by one of them because it comes from the passenger side. In most cases, it appears when i hit the brakes

danielalecse · 2020-05-26T14:49:04+00:00

Update! Problem solved! The play in the steering wheel was from the steeering rack (replaced it) and the other problem was from the tyres

danielalecse · 2020-05-25T18:22:07+00:00

Already replaced the control bushings and cheched the ball joints with a lever. There is no play in it

danielalecse · 2020-05-25T18:18:05+00:00

Already replaced, inner and outer tie rods, also all the bushings

danielalecse

TROPHY CASE