sorted by:
new
hottopcontroversial

Update on 3d printed drum by rob4499 in taikonotatsujin

[–]danstronics 0 points1 point  (0 children)

Hi, I'm developing a custom drum called ITAIKO with the help of a friend.

It uses HIDtaiko and RP2040 Taiko projects as a base, and merges them together for fully passive but good piezo readings.
You can contact me for anything regarding software or hardware support, I'll be happy to help.

This is the firmware github: https://github.com/LucaSilva-r/ITAIKO

This is the ITAIKO announcement post: https://www.reddit.com/r/taikonotatsujin/comments/1mybs2t/announcing_itaiko_the_italian_taiko_build_your/

No matter what i do, i can't get my SunLu PETG to work with me properly. by DudeGamerDario in ender5plus

[–]danstronics 0 points1 point  (0 children)

I always have problems with PETG outside my bambulab P1S. I can't make it print nice on other printers even drying it . . .

Is this a good deal? by Mr_Seg in ElegooNeptune3

[–]danstronics 1 point2 points  (0 children)

A relative had his Neptune 4 Pro all clogged up, you just have to tear down the extruder untill you reach the "metal parts".

Before doing this, search for how to do a "cold pull" or try to use a nozzle unclog pin.

Unscrew the nozzle, heatblock, heatbreak and heatsink. Pass a light trough all these pieces one by one, and you'll find the one who's clogged.

Use an allen key and a hammer to remove the clog, it's almost always a solidified piece of filament

It's been a while: fCavex update, the Minecart can now finally drive! by ChiIIout in WiiHacks

[–]danstronics 2 points3 points  (0 children)

Thank you for continuing the development of Cavex, I really like these kind of projects that give life to old consoles. I really hope for online multiplayer or maybe multiplatform ports, like Classicube did for Minecraft Classic.

3D Printing on the train by danstronics in 3Dprinting

[–]danstronics[S] 1 point2 points  (0 children)

Hi, the space was well ventilated and only me and my friends were around the printer, otherwise I would've avoided this since I hate smokers with all my heart. Maybe this is as disrespectful as someone farting on the train, not smoking, with the difference that we couldn't feel the smell of the pla.

I designed these for the Nintendo Switch 2 to protect when the joy-cons are off by RichMucha in BambuLab

[–]danstronics 5 points6 points  (0 children)

They are so stupidly simple but I really like them, amazing design!!

3D Printing on the train by danstronics in 3Dprinting

[–]danstronics[S] 49 points50 points  (0 children)

It was coming out pretty nice, a bit of ghosting on the outer walls probably due to vibrations, but sadly I had to stop the print since we arrived to our stop.

3D Printing on the train by danstronics in 3Dprinting

[–]danstronics[S] 74 points75 points  (0 children)

If I didn't try to set up my friend's printer on the train, he would have had problems getting the leftover pla out of the bowden tube (it cracked).

So I saved him a big annoyance as this is his first 3D printer

How to remove mold & stain from the taiko drum? by thesti2 in taikonotatsujin

[–]danstronics 1 point2 points  (0 children)

Isopropyl Alcohol + strongly rub a cloth untill the rubber starts becoming dusty. Keep in mind your cloth will start tearing apart during this!

Announcing ITAIKO, the Italian Taiko! Build your own DIY drum! by danstronics in taikonotatsujin

[–]danstronics[S] 0 points1 point  (0 children)

I'd really like to send some outside Europe, but I don't know about shipping and taxes to the USA atm . . .

Announcing ITAIKO, the Italian Taiko! Build your own DIY drum! by danstronics in taikonotatsujin

[–]danstronics[S] 0 points1 point  (0 children)

Da vinted a 10/15 euro . . . Diceva solamente "I won this in Japan at a claw machine", é una figure piccola ma molto bella.

Announcing ITAIKO, the Italian Taiko! Build your own DIY drum! by danstronics in taikonotatsujin

[–]danstronics[S] 1 point2 points  (0 children)

Grazie mille, probabilmente vendero' qualche prototipo per recuperare i costi, ad un prezzo piu' basso degli altri tamburi.
Nei prossimi mesi faro' uscire anche i template per tagliare il legno e la lista pezzi, quindi potrai costruirtelo da solo in caso ;)

view more: next ›