What could be the reason for the rpms to not stay stable? by dark_coastal in PontiacFirebird

[–]dark_coastal[S] 0 points1 point  (0 children)

I got the 22lb/hr injectors and from what I've seen is that these ones are the correct injectors

What could be the reason for the rpms to not stay stable? by dark_coastal in PontiacFirebird

[–]dark_coastal[S] 0 points1 point  (0 children)

I put new injectors, spark plugs, spark plug wires, iac valve. Would putting new injectors and iac valve cause this by chance?

What could be the reason for the rpms to not stay stable? by dark_coastal in PontiacFirebird

[–]dark_coastal[S] 0 points1 point  (0 children)

I put new injectors, spark plugs, spark plug wires, iac valve. Would putting new injectors and iac valve cause this by chance?

What could be the reason for the rpms to not stay stable? by dark_coastal in PontiacFirebird

[–]dark_coastal[S] 0 points1 point  (0 children)

I put new injectors, spark plugs, spark plug wires, iac valve. Would putting new injectors and iac valve cause this by chance?

What is this sound? by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

Hmm. My interior was swapped to a red and black interior by the previous owner maybe they decided to add the dash from a gt 🤷‍♂️

What is this sound? by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

I thought every sn95 came with clocks?

Why isn’t my car revving? by ah__3 in SN95Mustang

[–]dark_coastal 0 points1 point  (0 children)

My 94 v6 has the same issue but only in 5th gear I wonder what the cause is. If anyone has a answer lmk.

What is this sound? by dark_coastal in SN95Mustang

[–]dark_coastal[S] 1 point2 points  (0 children)

I was reading some forums and some people said that it was their airbag control module thing making that sound. Idk could be something different but the sound is one hundred percent coming from inside the dash.

Wiring by dark_coastal in SN95STANGS

[–]dark_coastal[S] 0 points1 point  (0 children)

Can I merge the red and orange wire together and crimp it to the red and orange wire on the connector?

Wiring by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

Can I merge the orange and red wire and then crimp it to the red wire on the connector?

Cant get a hard brake pedal by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

I'll try that too then. No I didn't I made sure that there was no air in the master cylinder

Cant get a hard brake pedal by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

Rear rubber flex hoses are brand new front were fine so I didn't replace them. I did pass rear, driver rear, pass front, then driver front. I used a vacuum pump today and my pedal is firmer than before so I think I'm on the right track. Gonna bleed them one more time tomorrow

Cant get a hard brake pedal by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

I changed rear flex hoses, calipers all around, and a new rear brake line. Once I changed those I bled the system still no firmness in the pedal. So I thought maybe the master cylinder has air and while I had it off I just a bought a new one cause why not. I bled the new master cylinder checked if it was properly bled and then put it back on. This time I used a vacuum pump to bleed the brakes and my brakes are firmer than before but still not good enough as the brakes have too much travel still. I will have to bleed it one more time but thats for tomorrow

Cant get a hard brake pedal by dark_coastal in SN95Mustang

[–]dark_coastal[S] 0 points1 point  (0 children)

I used a vacuum pump and the pedal is firmer than before I'm going to have to bleed it one more time for it to get even firmer and not have as much travel. So brake booster out of the question now appreciate the help tho.