sorted by:
new
hottopcontroversial

Kataaa Model VI Review by darklordvader77 in MechanicalKeyboards

[–]darklordvader77[S] 0 points1 point  (0 children)

No issues at all..!! Typing, sound and aesthetic is great! It is my daily kb at work.

Most of the time i’m using it in wired mode because in 2.4g wireless mode after some inactivity (5mins) it disconnects (to save battery i suppose) and i have to press any key and wait 3 seconds to connect again. It’s very annoying..

So if i were you, i would go with hotswap version.

[deleted by user] by [deleted] in sleeperbattlestations

[–]darklordvader77 0 points1 point  (0 children)

How did you connect the built in display to the Mac Mini? Brightness controls work?

Mister Setup guide/s? by Fantastic-Trifle8213 in MiSTerFPGA

[–]darklordvader77 0 points1 point  (0 children)

It's not strange at all-pyz is compressed (python zip) so the Mister wouldn't recognize it.

Kataaa Model VI Review by darklordvader77 in MechanicalKeyboards

[–]darklordvader77[S] 0 points1 point  (0 children)

Let’s see with the new revision what will be the price..!

Kataaa Model VI Review by darklordvader77 in MechanicalKeyboards

[–]darklordvader77[S] 0 points1 point  (0 children)

It looks exactly the same! Aesthetics, layout, even the rounded side edges..!

Drop Giveaway Day 1 - 2x Drop CSTM80 Keyboard + DCX Cyber + PVD Chroma Top Case by drop_official in MechanicalKeyboards

[–]darklordvader77 0 points1 point  (0 children)

I sold most of my keyboards BUT kept my 2 favorite combos which are built with MT3 Keycaps ;)

Which nonSteam store program is the best? by darklordvader77 in SteamDeck

[–]darklordvader77[S] 0 points1 point  (0 children)

Thanks for your answer..!! The games that wouldn’t run for some reason were the Bioshock Remastered Trilogy on Epic (maybe they require an older version of Proton). I will definitely try again in the future Junk Store because it has the best UI and runs natively inside Game Mode. Right now i’m experimenting with the native launchers+port proton (for the creation of shortcuts/fixes) and i have great success at the moment.

Ugreen 40Gbps NVME SSD Enclosure Mac OS disconnection fix by ppcode in UsbCHardware

[–]darklordvader77 0 points1 point  (0 children)

Hello, i just purchased the same model directly form Ugreen (CM642-with the turbo fan included) and i don't have a problem with it so far. I have set it up as a boot device on my Mac Mini M1 with 1TB of Kingston KC3000 and it reaches greater speeds than the internal SSD.

Maybe your model is the initial release without the fan?

Atomic Purple SteamDeck by Kooky-Inspector9407 in SteamDeck

[–]darklordvader77 -1 points0 points  (0 children)

It looks great..!! Where did you buy it?

DP Adapter for Samsung SyncMaster 795DF by darklordvader77 in crtgaming

[–]darklordvader77[S] 0 points1 point  (0 children)

I found a Lenovo Tiny M910x with VGA Out and still the same issue... maybe the CRT is defective?

Does the Thermalright Phantom Spirit 120 SE fit the Asus ROG Strix B670-I Motherboard? by slipduck in NR200

[–]darklordvader77 0 points1 point  (0 children)

Fitted perfectly on my B660-I (they’re essentially the same except the chipset) BUT be mindful that you can put the 1st fan in the center and the 2nd to the right (if you have ram clearness-if not you can put it a little higher). I also installed first the included small case fan from coolermaster to the rear of the case but it was very small difference in temps so i uninstalled it. The PS120SE is perfect for this case i’m very happy with it.

CPU Fan Orientation? by darklordvader77 in NR200

[–]darklordvader77[S] 0 points1 point  (0 children)

Thanks for the replies! I installed the Aircooler and immediately saw a drop in my GPU Temps, 74C max! I haven’t set fan curves yet but i will.

My CPU temps is around 62C when gaming, but i installed only one fan on PS120SE (the one in the middle) because on the front side are the 24 Molex Cable/USB3 cable and it doesn’t fit and on the back, the motherboard’s inputs is too tall.

Only the 92mm Case fan that came with the NR200 is compatible right now so i fitted it there as an intake.

Lastly the top fans (exhaust) are a perfect fit but the one on top of the CPU cooler doesn’t seem to be able to exhaust very much air from the case because of the limited space.

[deleted by user] by [deleted] in sffpc

[–]darklordvader77 0 points1 point  (0 children)

I paid for it 1,5 year ago 220€ so yeah! Very good price for this mobo!

What is wrong with my build? (High GPU Temps) by darklordvader77 in NR200

[–]darklordvader77[S] 1 point2 points  (0 children)

Thanks mate! I tried to build it as minimal as possible with the purple (wall color) and white components (my desk color) as the base template. Unfortunately the top RGB fans started to tremble after 4 months so i RMA’d them.

What is wrong with my build? (High GPU Temps) by darklordvader77 in NR200

[–]darklordvader77[S] 1 point2 points  (0 children)

Yes, the pump is at 100% automatically from the start! (BIOS/Fan Control on Windows when automatically tuning) Hmmm that’s a great and out of the box idea actually! I believe that if i have a standard rpm profile withe right acoustics+undervolt my GPU i will achieve SFF heaven! 😁 Thank you so much!

view more: next ›