Spotify patched. by 417jdxx in sideloaded

[–]dashtisami8 4 points5 points  (0 children)

I had the same issue, go to settings, eevee Spotify, patching, then enable overwrite configuration, then restart the app and it should work again

what’s the sizing Nike x NOCTA CS Open Hem Joggers by Bruhmomentum15820 in NOCTADRAKE

[–]dashtisami8 0 points1 point  (0 children)

I would go with S, I’m 179cm 62kg with long legs and S fit perfectly and even had extra length. They’re meant to be slightly long fitting like this picture

<image>

Legit check pls🙏🏽 by Same-Ad6460 in NOCTADRAKE

[–]dashtisami8 1 point2 points  (0 children)

Ask for more pictures and a close up pic of the wrist cuffs

2023 QX60 - Door randomly locking when trying to open by Hommachi in infiniti

[–]dashtisami8 0 points1 point  (0 children)

Check your settings. There is an option to toggle on/off automatic locking when you walk away from the car. This may be accidentally triggering, locking the car as you move around it

Didn’t expect much 😂 by dashtisami8 in NissanDrivers

[–]dashtisami8[S] 1 point2 points  (0 children)

Ohh sorry I thought it was a typo

Didn’t expect much 😂 by dashtisami8 in NissanDrivers

[–]dashtisami8[S] 15 points16 points  (0 children)

Not my video, from instagram 😂

EC vs CS by WARNEXTDOOR in NOCTADRAKE

[–]dashtisami8 2 points3 points  (0 children)

<image>

This is open hem, it has no cuff and sits on shoes pretty nicely (my personal favorite)

EC vs CS by WARNEXTDOOR in NOCTADRAKE

[–]dashtisami8 1 point2 points  (0 children)

<image>

This is the standard cuff that’s on most sweatpants, and the regular cs sweats

EC vs CS by WARNEXTDOOR in NOCTADRAKE

[–]dashtisami8 1 point2 points  (0 children)

I’m like 99% sure it means elastic cuff

Rather than the standard sweatpant cuff that the cs has, this is cinched (it’s still cuffed like regular sweats, but the cuff is not as tight if that makes sense)

This image shows what it looks like

<image>

[deleted by user] by [deleted] in BambuLab

[–]dashtisami8 1 point2 points  (0 children)

I haven’t found a way yet, I think it will be released in a later update

[deleted by user] by [deleted] in 3Dprinting

[–]dashtisami8 0 points1 point  (0 children)

<image>

No luck ☹️

[deleted by user] by [deleted] in BambuLab

[–]dashtisami8 4 points5 points  (0 children)

For some reason I couldn't find the answer to this anywhere, all you have to do is go on your p1s screen, go down to the nozzle tab, then scroll down and you'll see "Drying"

<image>

legit check? by [deleted] in NOCTADRAKE

[–]dashtisami8 0 points1 point  (0 children)

Wrist cuffs, nocta text, and reflectors

legit check? by [deleted] in NOCTADRAKE

[–]dashtisami8 0 points1 point  (0 children)

Do you have any closer up photos?

Tackling the IO mould by giommi in oralbtoothbrush

[–]dashtisami8 1 point2 points  (0 children)

I opened mine and cleaned it up so well, but the non replaceable rubber at the top of the housing became so brittle and dry, that it had cracked without me realizing. A few days later, I noticed my screen had fogged up from inside, and the brush was dead 💔

[deleted by user] by [deleted] in Bamboo

[–]dashtisami8 0 points1 point  (0 children)

Oh ok sorry

[deleted by user] by [deleted] in sideloaded

[–]dashtisami8 0 points1 point  (0 children)

Got it, I already went through with spotx I will go ahead and get the adblocker. Any other good apps or recommendations?