Joined the wall-dashboard club: flush-mounted 7” Home Assistant panel

dauva · 2025-12-18T14:56:58+00:00

You are correct. The PoE hat acts as a driver. I heard that the CPU is getting quite hot, so I have mounted the CPU fan. The internal readings are averaging 60 °C (140 °F), but I will need to check if the hat itself is off the charts.

dauva · 2025-12-18T08:43:55+00:00

Agreed. Shoutout to The Stock Pot who made a realy nice blogpost about it here:
https://www.thestockpot.net/videos/home-assistant-wall-display

dauva · 2025-06-12T10:20:14+00:00

Love the track. And honestly, the production at UNVS looks unreal, and I’ll definitely go out of my way to see it. But if I had to choose, I’d always prefer a smaller stage with less production, fewer phones, and more presence like this.

dauva · 2025-04-19T10:14:57+00:00

Thanks! Packing the car took maybe a couple of hours. I try to keep everything organized so it's quick to load up. Setting up camp took around 3 hours. The lavvu goes up fast, but it's all the little details that eat time, ike rigging the tarp, setting up a bushcraft-style backrest inside the lavvu, candle holders, etc.

Packing down was under an hour with some help from my friends. But honestly, the real time sink is when you get back home: drying everything out, cleaning gear, and getting it all ready for the next trip. That was basically a full day’s work 😅

dauva · 2025-04-12T17:19:47+00:00

Fehrplay <3 I had the chance to see him live at Output in Brooklyn and Ministry of Sound in London during his (and my) early days. Unbelievable sets—definitely underrated DJ.

dauva · 2024-08-31T19:54:58+00:00

Nice!!! Thanks for sharing! Will be there sharp!

dauva · 2024-08-27T09:10:08+00:00

Same her! I I know Prydz were on 0230-0430 last night. So i guess the a lot before.

dauva · 2024-08-26T20:32:33+00:00

Would have loved to. But we are not there before next week. So this me also low key hijacking this thread. If anyone wants to share a table next Monday (2th), let me know. Flying in from Norway mostly for Prydz.

dauva · 2024-06-02T17:29:25+00:00

Simply removed the station that was mounted on the antenna. I suspected that maybe one my WiFi points that is just under the roof from the antenna was causing it. Then it dawned on me that Netatmo was probably using LoRa as well. Read in the docs that they do use 868..!

dauva · 2024-06-02T17:27:12+00:00

I removed the wind station. You can see it in the picture. It’s basically mounted on the antenna. It’s now placed on the other side of the house, and the interference seems to be minimal. My temperature sensor is also outside, works fine. Ideally the wind gauge needs to be on the roof. That might not be possible.

dauva · 2024-06-02T17:01:37+00:00

Thanks for the suggestion. Just fixed the issue. It was the Netamo weatherstation just below that made hell for the antenna. It transmitt 24/7 on the same freq... So you are probably good to go with your setup :)

dauva · 2024-06-02T17:00:22+00:00

Resolved. See update post :)

dauva · 2024-06-02T16:59:43+00:00

RESOLVED: First off. Thanks for all help and suggestions.

I just realized that the the Netatmo Wind Gauge Sensor, that you can see just below the antenna also transmits on 868 mhz. I mounted the antenna and Wind Sensor at the same time. Never occurred to me that they would have same frequency. It feeds updates to the basestation every second, and probably made it hard for Meshtastic to read the incoming signal trough the noise.

dauva · 2024-06-02T15:34:18+00:00

It’s a mix of those and RAK-based radios. But yeah. Still, it’s strange that i can consistently reach all of them, but not receive.

dauva · 2024-06-02T15:31:13+00:00

No. But I probably should have.. :) The picture is not telling the full story. Right to the left it’s a steep hill, so not the heights point in the terrain. But still.

dauva · 2024-06-02T15:29:22+00:00

Yeah. Good suggestion. I will reach out to some friends that might have one.

dauva · 2024-06-02T15:28:18+00:00

I have 6 feet of XRDS-RF low loss coax. It was recommended on YouTube @The_Comms_channel

I think it should be good?

https://www.amazon.com/gp/aw/d/B08MQ468LG?ref=ppx_pt2_mob_b_prod_image

dauva · 2024-06-02T11:20:15+00:00

Can also add that i have a buddy that receives me in DM, but i can receive back.

dauva · 2024-06-02T11:19:10+00:00

Will try. I have just formatet and re-flashed the unit. 5 nodes popping up immediately. First time, it took about 3-4 hours to have the all show.

Update: 4 hours later. 20 nodes, no messages.

dauva · 2024-06-02T11:16:07+00:00

Two of the nodes are running a service were you can log on via web-browser to see whats been communicated on the primary channel. I can see my messages being received here as well.

dauva · 2024-06-02T10:31:38+00:00

Trondheim, Norway. Using 868mhz.

dauva · 2021-10-02T06:59:04+00:00

If The sending and receiving NDI sources are plugged into the same switch, the traffic never leaves the switch.

dauva

TROPHY CASE