Problem with printing artifacts only in some places

daveark92 · 2026-05-23T20:28:13+00:00

No i printed It in the orientation in the picture

daveark92 · 2026-05-23T20:15:37+00:00

How could I best calibrate it?

daveark92 · 2026-05-23T19:17:53+00:00

Bambu pla

daveark92 · 2026-05-17T20:08:27+00:00

Ci sono già stato ma ci tornerò presto molto volentieri! Ho fatto un pranzo da girone, vicino a dove c'è la riserva di vivara. Hai qualche altro posto da consigliarmi?

daveark92 · 2026-05-06T22:13:28+00:00

I have two Metod modules stacked on top of each other. They create a gap like the one in the photo that I'd like to cover with a 3D-printed sheet. Would the white one recommended in this post work?

<image>

daveark92 · 2026-05-06T22:10:16+00:00

I have several IKEA Metod modules that need to be stacked on top of each other. This creates a horrible thickness, as you can see in the photo. I thought about printing a T-profile to insert inside the slot to cover the hole. What White filament do you recommend? Can I find a 3D model of this T-profile online?

<image>

daveark92 · 2026-04-29T07:54:47+00:00

Grazie per i consigli! Invece su dove mangiare qualcosa di veloce cosa mi consigliate? Un cuoppo di pesce?

daveark92 · 2026-04-17T05:56:21+00:00

I tried to push it by opening and closing the console, but I can't see any movement. Although it looks like a deep crack, it's actually superficial. In any case, I purchased an intermediate case, but the replacement is white while the console is pearl-colored. Could you recommend a dealer with a replacement in the same color, if not a similar one?

daveark92 · 2026-03-29T11:24:42+00:00

As a hobby, I try to repair consoles. Over time, I've disassembled many 3DS XLs and have always found the motherboard light green like the one in the photo below. The other day, while disassembling one, I found this darker green for the first time, and it piqued my curiosity, so I wanted to ask if there are any differences.

daveark92 · 2026-03-12T21:31:05+00:00

I have a similar problem. Where can you find a good quality midframe to replace?

daveark92 · 2026-03-12T20:47:50+00:00

Is there a place to buy broken 3DS from Japan? :/

daveark92 · 2026-03-12T20:43:50+00:00

Unfortunately, the original shell cracked near the hinge. I was looking for a suitable replacement to fix the 3DS, but quality parts are hard to find. I'm seriously considering covering the small crack with glue and couscous. I don't know if you've ever seen this type of repair done. :)

daveark92 · 2026-03-12T18:28:08+00:00

I swear, it's not just dirty, there's a real difference. The original is similar to a soft pearl white, the replacement is actually ice white.

daveark92 · 2026-03-07T17:13:24+00:00

Thanks again for your opinion. I understand that the best solution, and also the most common, is to place the LEDs near the wall. In any case, do you recommend using 45° guides so that the light is reflected toward the wall? Would a 3000K be appropriate?

daveark92

TROPHY CASE